Beli Mesin transfer bekas (51)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, mesin transfer putar berkinerja tinggi, dirancang khusus untuk produksi massal komponen berukuran sedang hingga besar. Berkat waktu produksi yang lebih singkat, presisi tinggi, dan keandalannya, mesin ini berkontribusi pada peningkatan efisiensi di sektor pemesinan: hingga 15 operasi pemesinan, operasi pemesinan melintang, atau operasi pemesinan frontal pada kedua sisi. Ledpeznnpmofx Al Norp

Tahun pembuatan: 1988, Kondisi: bekas, Eubama S5 Rundtaktmaschine Seriennummer 5531 Baujahr 1988 Sehr guter Zustand Seit 15 Jahren unbenutzt Lrodpfx Aledg Da Io Nop

Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Fanuc, model controller: 30i, Deskripsi: Umum: Tahun pembuatan: 2011 Kontrol: Fanuc 30i Kapasitas beban meja maks.: 100 kg Perjalanan sumbu X/Y/Z: 300/300/370 mm Berat pemasangan: sekitar 33.000 kg Stasiun Pemesinan I (X/Y/Z/B): Teknologi: 1 x spindle vertikal Kecepatan putar: 8.000 rpm Tipe dudukan alat: HSK-A 63 Daya: 31 kW Torsi: 197 Nm Pergantian alat: 12 posisi Sumbu B: 0,001°, indeksasi pneumatik, gaya penjepit Diameter/panjang alat: 125/250 mm Stasiun Pemesinan II (X/Y/Z/B): Teknologi: 1 x spindle vertikal + 1 x spindle horizontal Kecepatan putar: 8.000 rpm Tipe dudukan alat: HSK-A 63 Daya: 31 kW Torsi: 197 Nm Pergantian alat: 12 posisi Sumbu B: 0,001°, indeksasi pneumatik, gaya penjepit Diameter/panjang alat: 125/250 mm Stasiun Pemesinan III (X/Y/Z/B): Teknologi: 1 x spindle vertikal Kecepatan putar: 8.000 rpm Tipe dudukan alat: HSK-A 63 Daya: 31 kW Torsi: 197 Nm Pergantian alat: 12 posisi Sumbu B: 0,001°, indeksasi pneumatik, gaya penjepit Diameter/panjang alat: 125/250 mm Stasiun Pemesinan IV (X/Y/Z/B): Teknologi: 1 x spindle vertikal + 1 x spindle horizontal Kecepatan putar: 8.000 rpm Tipe dudukan alat: HSK-A 63 Daya: 31 kW Ljdpfx Aszfu Rfol Njrp Torsi: 197 Nm Pergantian alat: 12 posisi Sumbu B: 0,001°, indeksasi pneumatik, gaya penjepit Diameter/panjang alat: 125/250 mm Stasiun Pemuatan: Jumlah: 2 unit (depan dan belakang) Perlengkapan / Aksesori: Sistem pengukuran: Sistem pengukuran langsung di semua sumbu Pembuangan serbuk: Konveyor serbuk Sistem pendingin: Unit pendingin internal (IKZ), 30 bar Pemantauan kerusakan alat: Artis, tipe CTM V5 Sistem penjepit titik nol: Erowa Pemurni kabut emulsi: Reven

Kondisi: baik (bekas), Tahun pembuatan: 2010, Meja putar merek WEISS, tipe: TC 220T, tahun pembuatan 2010. Lrsdjxr Dh Hjpfx Al Nsp

Kondisi: bekas, en001 Lsdpfx Aeu Idvwjl Nerp

Kondisi: bekas, en-GB_TD0011 Lrjdpfx Alsu Idw Ij Njp

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Machine weight approx.: 17.0 t Total power requirement: 83.0 kW Machine dimensions (LxWxH): 2400x2800x2800 mm Control cabinet dimensions: No. 1: LxWxH: 1000x850x2350 mm No. 2: LxWxH: 1250x650x2230 mm No. 3: LxWxH: 650x600x1700 mm No. 4: LxWxH: 1000x500x1350 mm Required floor space approx. (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT with 3 working stations equipped with 15 drilling and milling spindles For example: production of industrial fittings in larger quantities (see photo). Lrsdpju Idxfsfx Al Njp Further technical details regarding the machine: - Workpiece carrier: workpiece holding drum Ø 800 mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling and milling unit: SK 40 tool holding fixture; spindle stroke 125 mm; feed rate 1 m/min.; rapid traverse 4 m/min.; max. spindle speed 2240 rpm - Right side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - Left side: 3x drilling and milling spindles, 1x thread cutting spindle, 1x U axis, as well as 2x radially movable drilling and milling spindles, 1x movable thread cutting spindle and 2x movable U axes - 1st thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 125 mm; spindle speed 35.5 - 900 rpm; reversible (right/left) - 2nd thread cutting unit: SK 40 tool holding fixture; quill Ø 125 mm; working stroke 80 mm; spindle speed 45 - 560 rpm; reversible (right/left) Equipment: - 2 hydraulic power units - Chip conveyor system - Band filter by Filtertechnik Gera (conveyor width 430 mm) - Operator panel - Hand-held control unit This machine is not connected. Sale as is! Subject to prior sale.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 72 kW Approx. machine weight: 18.0 t Ledpfeu Idv Dsx Al Njrp Machine dimensions (LxWxH): 2100 x 3400 x 2600 mm Control cabinet dimensions: - No. 1 (LxWxH): 1000 x 850 x 2300 mm - No. 2 (LxWxH): 1250 x 850 x 2500 mm - No. 3 (LxWxH): 1000 x 850 x 2100 mm - No. 4 (LxWxH): 1000 x 500 x 2350 mm Required floor space (approx.) (LxWxH): 5.0 x 6.2 x 3.8 m TRANSFER AUTOMAT featuring 3 working stations with 15 drilling and milling spindles For example, for the production of fittings in larger quantities Further technical data of the machine: - Workpiece carrier: Workpiece drum Ø 800mm for 8 workpiece clamping stations, indexing time 10 sec. - Drilling-milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. spindle speed 2240 rpm - Left: 3x drilling and milling spindles and drilling spindles, and 2x thread cutting spindles - Right: 2x drilling and milling spindles and 2x thread cutting spindles, and 1x U-axis, as well as radial 2x adjustable thread cutting spindles, 2x drilling and milling spindles (one adjustable), and 1x adjustable U-axis - 1st thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power units - Chip conveyor system - Belt filter from Filtertechnik Gera (fleece belt 430mm) - Control panel - Manual pushbutton Subject to prior sale.

Kondisi: bekas, en-230624-01 Lrsdpfx Alsu Idwbo Nsp

Kondisi: bekas, Technical details: Spindle taper: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15-20 sec Speed: drilling 225...1037 rpm Speed: threading 50...316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Machine weight approx.: 9.0 t Space requirement approx.: 3.9x2.4x2.5 m Machine dimensions: L:3.9xW:2.2xH:2.7 m Dimensions L x W x H: + plant 2.7x2.52x2.25 m Transfer machine Ledju Idycepfx Al Norp The machine can be offered fully overhauled. (Photos show original condition)! The machine is designed for metal-cutting machining of workpieces in a single clamping operation. It is especially suitable for turning blanks made of brass with a diameter of 90 mm x approx. 100 mm length. Description: - Workpiece carrier with indexing disc and clamping stations, rotary table type with horizontal axis, featuring 5 workpiece stations. Machining units: - Drilling spindles and tapping units - Drilling capacity up to 2 3/4" and 81.53 mm in brass - Thread cutting up to 2 1/2" and metric threads The machine is equipped with automatic workpiece feeding and unloading units (feeding rate 3-4 pieces/min and cycle time 15-20 sec). Also includes coolant system. i.D.

Kondisi: bekas, Technical specifications: Lodpfx Asu Idvkjl Nsrp Number of spindles: 9 units Total power requirement: 83.0 kW Machine weight approx.: 17.0 t TRANSFER MACHINE with 9 drilling and milling spindles - right side: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed, and left side: 3 drilling and milling spindles, 9 speeds, gear-driven, fixed, as well as 3 radial drilling and milling spindles, 9 speeds, gear-driven, fixed internal diameter.

Kondisi: bekas, Technical details: Number of spindles: 9 units Approximate machine weight: 10.2 t TRANSFER AUTOMATIC MACHINE with 9 drilling and milling spindles - On the right: 2x drilling and milling spindles and 1x tapping spindle with 9 speeds - On the left: 2x drilling and milling spindles and 1x tapping spindle with 9 speeds, plus radially 2x flexible drilling and milling spindles and 1x flexible tapping spindle, each with 9 speeds Lrodpfsu Idwnjx Al Njp i.D.

Kondisi: bekas, Technical details: Number of spindles: 15 units Number of stations: 8 units Control system: PS 2000 Total power requirement: 83.0 kW Approx. machine weight: 17.0 t Space requirements approx. LxWxH: 5.0 x 6.2 x 3.8 m Machine dimensions: LxWxH: 2400x2800x2800 mm Control cabinet dimensions No. 1: LxWxH: 1000x850x2350 mm Control cabinet dimensions No. 2: LxWxH: 1250x650x2230 mm Control cabinet dimensions No. 3: LxWxH: 650x600x2300 mm Control cabinet dimensions No. 4: LxWxH: 1300x650x2350 mm TRANSFER MACHINE with 3 working stations and 15 drilling and milling spindles E.g. for series production of fittings in large quantities Further technical specifications of the machine: - Workpiece carrier: Workpiece holding drum Ø 800mm for 8 workpiece clamping stations, cycle time 10 sec. - Drilling/milling unit: SK 40 tool holder; spindle stroke 125mm; feed rate 1 m/min; rapid traverse 4 m/min; max. speed 2240 rpm - Right: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm - Left: 4x drilling and milling spindles with 18 speeds each and 1x hydraulic thread-cutting spindle with speed from 14 - 224 rpm, as well as 3x radial drilling and milling spindles, including 1x U-axis and 1x thread-cutting spindle - 1st thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 125mm; speed 35.5 - 900 rpm; right/left - 2nd thread-cutting unit: SK 40 tool holder; quill Ø 125mm; working stroke 80mm; speed 45 - 560 rpm; right/left Equipment: - 2 hydraulic power packs - Chip conveyor - Band filter by Filtertechnik Gera (nonwoven band 430mm) - Operator panel - Hand-held pushbutton controller Lrodpeu Idxrsfx Al Nop i.D.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Ini adalah mesin EUBAMA S6 tahun 2002. Jumlah stasiun pengikat (rahang): 8 Sistem chuck 2 rahang Lodpfxsv Ef N As Al Nsrp Diameter penjepitan maksimum: 40 mm Panjang benda kerja maksimum: 330 mm Output maksimum (siklus/menit): 40 Sistem penjepitan hidrolik Kontrol mesin: CNC Siemens SINUMERIK Jumlah unit pemesinan: 15 Magazin feeder batang FMB MT/42/4200/B Kapasitas muat magazin: 4,2 meter Konveyor serpihan KNOLL Tangki pendingin KNOLL (VRF 250/1250) Mesin dalam kondisi operasional.

Kondisi: bekas, Tahun pembuatan: 2010, x-axis travel 450 mm y-axis travel 400 mm z-axis travel 320 mm Tool holder HSK 63 Spindle speeds 0 - 10,000 rpm Rapid traverse 30 m/min Control GE FANUC Series 16i System for machining fittings, valve bodies, couplings, and similar components. Comprising: 1 used flexible manufacturing cell (transfer machine) by RIELLO, Model VERTIFLEX VFX 450-2/1-0/1-V, year 2010, featuring 2 x 3-axis machining modules each with 8-position tool turret, Lodpfxotqqqms Al Njrp Travels for Module 1: X1/Y1/Z1 = 450/400/320 mm, Travels for Module 2: X2/Y2/Z2 = 450/400/320 mm, Tool holder type HSK 63 for each module, Rotary table with 2 integrated workpiece carriers, each 400 mm diameter (B-axis per workpiece carrier 360 x 1°), ICS (internal coolant supply) Accessories: chip conveyor, coolant system Linked via ABB handling robot to 1 used flexible manufacturing cell (transfer machine) by RIELLO, Model VERTIFLEX VFX 450-2/2-0/1-V, year 2003, featuring 3 x 3-axis machining modules each with 8-position tool turret, Travels for Module 1: X1/Y1/Z1 = 450/400/320 mm, Travels for Module 2: X2/Y2/Z2 = 450/400/320 mm, Travels for Module 3: X3/Y3/Z3 = 450/400/320 mm, Tool holder type HSK 63 for each module, Rotary table with 2 integrated workpiece carriers, each 400 mm diameter (B-axis per workpiece carrier 360 x 1°), ICS Accessories: chip conveyor, coolant system youtu.be/vo4ZI_dvEZk

Kondisi: bekas, Tahun pembuatan: 2001, Stations 10 / 22 Tool holder SK 40 Control system SIEMENS SIMATIC OP 3 Total connected load approx. 112 kW = Transfer machine Drum-type indexing table with 10 workpiece stations, 22 machining units (Drilling: 7 units, Drilling & Thread Cutting: 8 units; Drilling & Countersinking: 5 units; Drilling, Countersinking & Thread Cutting: 2 units), Tool holder each SK 40, Motor power of individual units between 4.0 and 4.5 kW, SIEMENS control system SIMATIC OP 3, Handling robot ABB Ledpfx Ajtqqlqjl Norp Accessories: Power chuck (without jaws), chip conveyor, coolant system

Kondisi: bekas, Tahun pembuatan: 1997, Transfer machine Stations: 10 / 22 Tool holder: SK 40 Control: SIEMENS SIMATIC OP 3 Total connected load: approx. 130 kW Cam drum with 10 workpiece stations, 22 machining units (Drilling: 10 units, Drilling & Tapping: 5 units, Drilling & Counterboring: 3 units, Drilling, Counterboring & Tapping: 1 unit, Tapping: 3 units), Each with SK 40 tool holder, individual unit motor power between 4.5 and 5.5 kW, SIEMENS control system SIMATIC OP 3, equipped with ABB loading robot Accessories: - Power chuck (without jaws) - Chip conveyor Ljdpfxetqqlrj Al Njrp - Coolant system

Kondisi: bekas, ZUMBACH - JUROCA Z 14 ist eine Rundtakt Transfermaschine hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Kapazität: 14 Arbeitspositionen, 6 CNC-gesteuert, 8 mechanisch; 1 Be-/Entladeposition; Tischhub 20 mm; Arbeitsbereich 40 mm; Schraubendurchmesser 75/35/42 mm; Spindeldrehzahl 3000–18000 t/min; Produktion 35 Stk/min. Technische Daten: Anschluss 3x400 V 50 Hz; Gewicht ~3500 kg; Abmessungen Maschine 2000×2000×2400 mm; Steuerung 1200×1200×2100 mm. Ausstattung: Steuerungsschrank (Abmessungen angegeben). Erzielt enge Toleranzen; Branchen: Automotive, Uhrmacherei, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Lrodpfx Aley S Dfzo Nep

Kondisi: siap digunakan (bekas), A complete CNC rotary transfer machining system by Winema, including interlinking, peripherals, and an industrial washing system, is available. 1) Rotary transfer machining center Winema RV20 Flexmaster: Stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, drilling diameters: 8.7mm / 15mm / 17mm / 18mm, reaming diameters: 9mm / 15mm / 18mm, cycle time: approx. 7s, output capacity: approx. 500 parts/hour, control: Siemens Sinumerik 840D. 2) Winema bar loading magazine: Tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3,200mm. 3) Knoll coolant filtration unit (Turbofilter): Dirty tank volume: 500l, clean tank volume: 150l, filtration fineness: 50μm. Ledpfx Ajzbl N Sol Nsrp 4) Knoll cooling system: Cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system: Separation efficiency: 96%–98%. 6) Linked continuous through-feed washing system with automatic parts transfer. 7) Hydraulic unit. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interconnected plant for NC control valve production. The production of other components could possibly be configured. Documentation is available. Inspection on site is possible.

Kondisi: bekas, Tahun pembuatan: 2017, BTB ROTARY TRANSFER MACHINE – MOD. TRO 8S 14U ISO CNEL – NUOVA 2017 COSTRUTTORE – BTB PAESE DI ORIGINE – ITALIA STATO – INSTALLATA TIPO – TRANSFER ROTATIVA ANNO – 2017 MODELLO – TRO 8S 14U ISO CNEL PESO – 23.000 KG Lrsdpfx Aezafbxjl Njp NUMERO STAZIONI – 8 STAZIONI DI LAVORAZIONE UNITÀ OPERATRICI – 14 UNITÀ DI LAVORAZIONE CONTROLLO CNC – FANUC CAPACITÀ MACCHINA – OPERAZIONI MULTI-ASSE SIMULTANEE, TRA CUI FORATURA, FRESATURA, MASCHIATURA E TORNITURA MOVIMENTAZIONE PEZZO – SISTEMI AUTOMATICI DI CARICO E SCARICO IMPIANTO REFRIGERANTE – SISTEMA INTEGRATO DI EROGAZIONE REFRIGERANTE AD ALTA PRESSIONE CONE MANDRINO – ATTACCO UTENSILI ISO 40 CNEL – STANDARD EUROPEI DI EMISSIONE ACUSTICA SISTEMA DI DIAGNOSTICA – INTEGRATO UNITÀ DI SOLLEVAMENTO/GESTIONE – CASTELLETTO UZZONE ERI-2000 – PORTATA 2000 KG, MOTORE 2,2 KW ROBOT – AUTOAZIONE INDUSTRIALI AUTOMATION TIPO – R.C.S.T./C.VIS. ROBOT – DOPPIA UNITÀ MH24 DI YASKAWA MOTOMAN PORTATA ROBOT – 24 KG AREA DI LAVORO – 1717 MM RIPETIBILITÀ – 0,08 MM (+/-) ASSI – 6 ASSI ARTICOLATI PESO – CIRCA 540 KG PER ROBOT CONTROLLO – DX200 O NX100 A SECONDA DELLA CONFIGURAZIONE VELOCITÀ MASSIMA J1 (Asse S): 170°/sec J2 (Asse L): 170°/sec J3 (Asse U): 175°/sec

Kondisi: bekas, Tahun pembuatan: 2002, rundtaktmaschine-pfiffner-hydromat-hb-32-45-2002 Lrsdpfx Asy N Agrsl Njp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, de Lodpfoy Tbtfox Al Nsrp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki pendingin: 1.800 l, Perlengkapan: dokumentasi / manual, - 16 POSISI TOOL - TAHUN PEMBUATAN 2000 (HANYA 3 TAHUN PENGGUNAAN PRODUKTIF) - TERMASUK PENGISI BATANG “IEMCA” (KAPASITAS 2 ton) - TERMASUK SISTEM TANGKI OLI (ISI CAIRAN PENDINGIN 1.400 l) - TERMASUK KONVEYOR SERPIHAN (DENGAN PEMBERSIH LUMPUR) - TERMASUK PERLENGKAPAN PENYETELAN TOOL - DAYA MAKSIMUM 40KW / 3 x 400 V - UNIT HIDROLIK “BOSCH” - SISTEM OPERASI “SYNUMERIC 840” - DOKUMENTASI - DALAM KONDISI MENYALA, DAPAT DILIHAT LANGSUNG - KONDISI SANGAT BAIK Ledpfxsy Nmb He Al Njrp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control system: Bosch MTX, HME operator interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure pump and high-pressure pump for internal tool cooling Machine table equipped with 8 collet chucks and 8 double-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 cut-off unit 8x VE 36/100 or VE 35/60 feed units 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring system Collection details: The main machine body is approximately 4 meters long, 3 meters high, and about 2.5 meters wide. Lodpfx Aljy Nkhdo Njrp Weight is approx. 6 tons. The other components are detachable. The hall is very spacious; there is no overhead crane. A forklift is required for disassembly. No forklift is available on site! Aisles are 3 meters wide; there is a large roller door, and trucks can drive right up to or even through the door.

Kondisi: bekas, Tahun pembuatan: 2005, FANUC 160 I-MB Steuerung Ljdpfxjfxgiys Al Norp KNOLL Späneförderer, Typ 1200 S-2, Baujahr 2012 4 Arbeitsplätze