Konstruksi/Daur Ulang Puing Bangunan

Construction & Demolition Recycling Construction Waste Recycling Equipment

Kondisi: siap digunakan (bekas), Bitzer Compressor Type: 60-70.2 Flow rate: 219.1 m³/h Cooling capacity: 143 kW at -5°C/+40°C, 118 kW at -10°C/+40°C, 77 kW at -20°C/+40°C Refrigerant: R404A Stock quantity: 3 units Stock number: S 75 Condition: Used, good We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, evaporators, condensers, chillers, cold rooms, as well as refrigerated and catering furniture, and machines for restaurants and meat processing. Check our other listings or call us— not all items are listed on Machineseeker. Kljdpsh Dht Djfx Al Now

Kondisi: bekas, Technical details: Welding current: 520 A Length: 1200 mm Height: 1100 mm Approx. machine weight: 147 kg Dimensions (L x W x H): 1.2 x 0.75 x 1.1 m Klsdpfx Aswc R Udsl Nsw Welding process: TIG/E/MIG-MAG Scope of delivery: Welding transformer, wire feeder, cooling unit Protection class: IP23C Insulation class: B/H

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), 2 unit pompa sentrifugal Produsen: KSB Model: WKF 50/7 Kapasitas aliran: 5,5 l/s (19,8 m³/jam) Tinggi tekan: 214 meter (21,4 bar) Suhu maksimum: 130°C Seal: Mechanical seal dengan koneksi air pembersih Kledpfsibwarjx Al Njw Motor listrik: VEM Daya penggerak: 30 kW Kecepatan putar: 2935 rpm ! Harga per unit !

Kondisi: baik (bekas), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, condenser, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1,450 rpm -Displacement: 22.14 m³/h -Max. allowable pressure: 24.5 bar -Quantity: 2x cooling units available -Price: per unit -Dimensions: 550/315/H390 mm Klsdpfx Asguzr Hjl Now -Weight: 88 kg

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, The machine has been out of use and stationary for several years, therefore it requires maintenance before being put back into service, which will be the responsibility of the buyer. Kedpfxstu U Ebe Al Nolw

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Kljdpfofz U S Esx Al Now Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a welding robot system with the following components: Elite Robot CS620 (1750mm reach) with programming flange and software Fronius TPSi 500 rotateZERO 500 positioner with 1800mm x 800mm intermediate frame Machine base frame Kljdpfev Dvlljx Al Njw The system is immediately ready for welding.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi angkat: 6.000 mm, kecepatan pengangkatan utama: 5.000 mm/menit, in excellent condition, incl. load collective memory with high reserve, incl. under-slung bottle, electrics 400/230/24V, incl. central electrical distribution for crane operation etc.! Advantage: No CAN bus control! Klodpoq R N Tqsfx Al Nsw Also available as a crane set.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, diameter poros: 50 mm, diameter rol: 155 mm, berat keseluruhan: 400 kg, daya: 1,5 kW (2,04 hp), tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, henti darurat, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Kedpfx Aljwt Sy As Nelw Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (approx. kg): 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Jaw Crusher dengan satu flywheel Pembukaan: 1.000 x 200 mm dengan rahang penghancur halus opsional: dengan motor listrik dan/atau dengan rangka baja Kledpfow U Thcex Al New