Mesin penggilingan kayu CNC

CORMAK M1325 PREMIUM 1300x2500

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 420.000 km, tipe perpindahan gigi: semi-otomatis, jenis bahan bakar: diesel, MAN TGS dengan Fassi 1300 T/M Sertifikasi TÜV dan UVV baru Godpfxez Ii Uhe Adqekc Kondisi ban baik Kendaraan telah sebagian dicat ulang dan tidak berkarat Transmisi semi-otomatis 480.000 km

Kondisi: bekas, Tahun pembuatan: 1998, Hänel Tipe: Rotomat 950 No. Perangkat: 120.657*1 Tahun Pembuatan: 1998 Tinggi perangkat: sekitar 3800 mm Lebar perangkat: sekitar 3140 mm Kedalaman perangkat: sekitar 1250 mm + 330 mm pelat meja Jumlah rak: 18 Lebar rak: sekitar 2880 mm Kedalaman rak: sekitar 400 mm Gedpfjy D S Hwjx Adqskc Tinggi rak: sekitar 310 mm Kapasitas beban per rak: 300 kg Total kapasitas beban: 5400 kg Warna: Bagian depan krem / sudut abu-abu

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Connected load: 18 kW, but the unit was completely overhauled in 2017. An inspection is possible. Gksdpsn Htktefx Adqsc

Tahun pembuatan: 1988, Kondisi: siap digunakan (bekas), Travel distances X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10,000 rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11,000kg. Gkedstpp H Nepfx Adqsc

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.400 kg, tinggi total: 2.492 mm, panjang total: 4.367 mm, lebar total: 3.070 mm, panjang meja: 1.500 mm, lebar meja: 650 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, NEW Vertical Machining Center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Included accessories: - Prepared for rotary table Gkodpfx Asrg Htpedqoc - External air blast at spindle - Left-sided auger chip conveyor - Automatic high-pressure coolant system through spindle at 20 bar - Wash-down gun - Guard base wash system - 390-liter coolant collecting tank - 3-color end-of-cycle signal light - Full auto power-off

Kondisi: baru, Tahun pembuatan: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearings: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Electrospindle inverter: yes Max electrospindle speed: 24,000 rpm (optionally 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved steel frame, precision machined Table type: vacuum, hybrid, steel, aluminum with M16 or M18 threaded holes #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint Gjdpfxjn Nv H Sj Adqekc #MDF #HPL #plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 50 h, nomor mesin/kendaraan: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with crosswise T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool release: pneumatic Blow air / MQL: external Linear Axis Drives Feed rate X and Y-axis: up to 50 m/min Feed rate Z-axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light gray Z-slide and milling head: orange Additional Equipment - 15-position tool changer Gjdpfxewwq Hcs Adqokc - Control unit in separate, mobile console

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.000 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 2.200 mm, panjang total: 3.550 mm, lebar total: 2.000 mm, berat keseluruhan: 870 kg, panjang penggilingan: 1.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 3.550 mm, lebar yang dibutuhkan: 2.000 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide Belt Sander MS92-150 – 3-Roller Deflection, Belt Size 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electrically operated table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration Gkodpotwb U Ajfx Adqjc - CE-compliant design The rigid machine frame, constructed of welded steel, ensures extremely smooth operation. Both machine bases are designed with an offset to enable grinding of workpieces longer than the machine table itself. The grinding belt is guided by three deflection rollers, providing the operator with an exceptionally open and accessible workspace, ideal especially for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Belt tension is pneumatically adjustable. The dust collection device is dimensioned to efficiently capture grinding dust and direct it to the extraction port when connected to a suitable extraction system. To allow for fatigue-free operation, the grinding unit runs in play-free, precise roller guides. The machine table can be quickly and easily adjusted to the appropriate workpiece height via the electrical table lift. The table lift guide components are maintenance-free. For loading, the table can be extended sufficiently so that workpieces can be placed without the need to slide them under the grinding belt. All main electrical controls are centrally located for user-friendly operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in “light grey” The standard machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and tilting workpieces. The handling system is mounted centrally beneath the infeed frame. To operate the handling system, the infeed frame is removed from the machine table. The handling system is equipped with four vacuum suction cups to hold workpieces and consists of: A bearing with a rotation axis featuring a brake disc at the rear. At the front of the rotation axis, a tilting device is mounted, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the tilting head allows for fine adjustment of the workpiece to the sanding belt. The release of the rotation and tilt axes is pneumatically controlled by foot switch, while manual movement of the axes is required. Maximum permissible workpiece weight: as flat table with infeed frame = 80 daN; when using the handling device (on the clamping plate) = 25 daN or 120 Nm (relative to axis center).

Kondisi: baru, Tahun pembuatan: 2026, Usable space: LxWxH 4300x1700x2200mm max. 220°C, Godpfxsizw E Uo Adqskc Heating options: oil, gas, or electric, Floor tracks for rack trolleys or manual/automatic conveying rails possible, Hinged or sliding doors available.

Kondisi: baru, Tahun pembuatan: 2026, The ATC plotter series has been developed for professional use in large industrial plants and factories, designed for the production of complex, large-scale components. Thanks to its special construction, the machine is suitable for manufacturing, among others, foundry models and yachts, significantly reducing processing time. To meet the demands of heavy-duty machining, ATC machines feature a reinforced structure and more powerful AC servo drives on each axis. The presence of five axes supports the machining process of even the most demanding components. Standard features of this series include automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly speed up the machining process that requires the use of multiple cutters. Gedpfx Adeiq U Tqjqokc Materials processed: - Wood - Wood-derived materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, ensuring high rigidity and resistance to overloads associated with the machining process. WORKING AREA: The usable work area of our machine is 3000 x 6000 mm. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters tailored to the individual needs of the client. DRIVES: Our machines are powered by SERVO motors, ensuring appropriate acceleration and speed in each direction. The X and Y axes use proven rack-and-pinion drives that ensure high durability and precision, while the Z-axis is powered by a high-grade ball screw. All axes run on linear guideways. SPINDLE: The cutting tool is driven by a high-class, powerful brushless spindle. The spindle speed ranges from 6,000 to 24,000 rpm. Power is supplied via an inverter with a higher capacity than the spindle itself, thus preventing speed drops under heavy loads. TOOL MAGAZINE: The standard equipment includes a linear tool magazine with 6 HSK holders. Additional magazine positions are available on request. SOFTWARE: The machine comes with dedicated CAD/CAM software, allowing for quick and easy component design, which the program subsequently converts to G-code. Import of ready-made files from other programs is also possible. CONTROL: Machine operation is managed by a controller featuring its own processor and built-in memory, ensuring stable and reliable performance.