Mesin penghalus - pemoles meja

CORMAK SP150

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: Hsdpfx Ahjwrm Dtjuet >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baru, Dimensions (L x W x H): 675 x 510 x 880 mm Weight: 56 kg Number of drawers: 5 units Hedpfx Ahsu Iml Ijujt Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers: 56 x 43 x 10 cm Internal dimensions of the bottom drawer: 56 x 43 x 17 cm Wheel dimensions: 100 x 30 mm.

Kondisi: bekas, Drilling capacity: 23.0 / 28.0 mm Max. drilling depth: 140 mm Throat: 300 mm Column diameter: 125 mm Table size: 415 x 385 mm Spindle speed: 100 - 2000 rpm Spindle taper: Morse taper 2 (MK 2) Voltage: 380 V Motor power: 0.9 / 1.4 kW Machine weight approx.: 225 kg Dimensions (L x W x H): 900 x 600 x 1960 mm Well-maintained condition (!!) Equipment: - Belt-driven column drilling machine - Reversible spindle rotation (left/right) - Pole-changeable drive motor Hjdpfx Ahjxabbysujt - Manual spindle feed with cross handle - Work table with 2 T-slots - Table height adjustment via hand crank - Machined base plate with 3 T-slots - Manual belt tensioning (handwheel at front) - Connection cable incl. 16A plug * Machine link: ?machineno=1008-9103760

Kondisi: baru, Drilling capacity in steel (diameter) 32 mm Throat 300 mm Drilling stroke 160 mm Morse taper 4 MT Table: 460 x 460 mm Spindle speed 75 - 3200 rpm Motor power 1.5 kW Column diameter 125 mm Thread M16 ST60 Feed rate 0.10/0.18/0.26 mm/rev Dimensions 800 x 500 x 2200 mm Weight 350 kg Equipment/features: - Automatic drill feed (magnetic clutch) - Height-adjustable and tiltable table Hodpfxokahu Re Ahust - Movable work table - Integrated coolant system - Powerful motor - 3 spindle feed levers - Safety guard with limit switch - Separate emergency stop - Integrated work light - Includes drill chuck 16 mm - B16 - Built-in automatic thread cutting.

Kondisi: baik (bekas), Tahun pembuatan: 1974, nomor mesin/kendaraan: 571, Penawaran 25456 Hjdpfxeyfn Npo Ahuet Data Teknis: - Kapasitas pengeboran: 28 mm - Dudukan spindle bor: MK 3 - 8 kecepatan spindle bor: 100 - 1120 rpm - Area meja: 400 x 400 mm - Unit bor dapat diatur ketinggiannya dengan engkol tangan - Jarak terkecil / terbesar antara meja dan spindle bor/frais: 300 / 600 mm - Stroke spindle bor: 120 mm - Jangkauan spindle bor: 260 mm - Sistem pendingin - Lemari dasar mesin dengan pintu - Penggerak: 400 V / 1,5 / 2,3 kW - Kebutuhan ruang sekitar: L 500 x T 1800 x D 950 mm - Berat sekitar: 200 kg

Kondisi: siap digunakan (bekas), HSS drill bits, milling cutters, taps, and saw blades. Condition: Used and unused mixed lot, no scrap. Total quantity: approx. 648 pieces Weight: 184 kg. Hjdpfjvb Udnsx Ahust

Kondisi: baru, Tahun pembuatan: 2026, CORMAK SP250 Polishing Machine – Industrial Disc Polisher for Deburring and Surface Finishing The CORMAK SP250 Satin Finisher is a highly efficient disc polisher designed for professional surface finishing, deburring, satinizing, and high-gloss polishing. This is the ideal solution for manufacturing plants, metal workshops, toolrooms, and metalworking facilities where durability, precision, and reliability are paramount. The machine features a robust construction based on a modern cast housing manufactured to current industrial standards and a rotor equipped with high-quality NSK bearings, ensuring exceptionally quiet and smooth operation. The tapered spindle thread allows for fast and secure mounting of various types of polishing discs—from soft to hard—depending on the finishing process. This industrial polisher is equipped with a 0.9 kW motor, providing ample power reserve and reliable performance even in demanding production environments. The technical solutions implemented make the SP250 an extremely versatile tool—both as a satin finisher for matting and satin finishing, and as a polisher for achieving a high-gloss finish. If you are looking for a robust and versatile machine, the CORMAK satin finisher is the choice that will meet the expectations of even the most demanding professionals. Key features of the machine: Hedpfx Aheyb Hu Aeujt - Industrial-grade disc polisher - Satin finisher for matting, deburring, and surface finishing - NSK bearings – reliability, silent running, and longevity - High-quality cast housing – durability and structural rigidity - Powerful 0.9 kW motor – professional performance Technical specifications of SP250 satin finisher Polishing disc diameter: 250 mm Polishing disc thickness: 26 mm Polishing disc bore: 16 mm Max rotational speed: 2850 rpm Motor power: 0.9 kW Voltage: 400 V Dimensions: 570 x 300 x 380 mm Weight: 22.2 kg