Mesin penghalus - pemoles meja

CORMAK SP250

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Nwsdpfx Aowrm Dtjfvjk Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baru, Dimensions (L x W x H): 675 x 510 x 880 mm Nwjdpfx Afsu Iml Isvek Weight: 56 kg Number of drawers: 5 units Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers: 56 x 43 x 10 cm Internal dimensions of the bottom drawer: 56 x 43 x 17 cm Wheel dimensions: 100 x 30 mm.

Kondisi: bekas, Drilling capacity: 23.0 / 28.0 mm Max. drilling depth: 140 mm Throat: 300 mm Column diameter: 125 mm Table size: 415 x 385 mm Spindle speed: 100 - 2000 rpm Spindle taper: Morse taper 2 (MK 2) Voltage: 380 V Motor power: 0.9 / 1.4 kW Machine weight approx.: 225 kg Dimensions (L x W x H): 900 x 600 x 1960 mm Well-maintained condition (!!) Equipment: - Belt-driven column drilling machine - Reversible spindle rotation (left/right) - Pole-changeable drive motor - Manual spindle feed with cross handle - Work table with 2 T-slots - Table height adjustment via hand crank - Machined base plate with 3 T-slots - Manual belt tensioning (handwheel at front) Nodoxabbyopfx Afvowk - Connection cable incl. 16A plug * Machine link: ?machineno=1008-9103760

Kondisi: baru, Drilling capacity in steel (diameter) 32 mm Throat 300 mm Drilling stroke 160 mm Morse taper 4 MT Table: 460 x 460 mm Spindle speed 75 - 3200 rpm Motor power 1.5 kW Column diameter 125 mm Thread M16 ST60 Feed rate 0.10/0.18/0.26 mm/rev Dimensions 800 x 500 x 2200 mm Weight 350 kg Equipment/features: - Automatic drill feed (magnetic clutch) - Height-adjustable and tiltable table - Movable work table - Integrated coolant system - Powerful motor - 3 spindle feed levers - Safety guard with limit switch - Separate emergency stop - Integrated work light Nedekahu Ropfx Afvjwk - Includes drill chuck 16 mm - B16 - Built-in automatic thread cutting.

Kondisi: bekas, Mesin Frais Deckel FP1 dengan display digital 3 sumbu. 380V. Kecepatan: 120–1900 rpm. Pergerakan sumbu X: 300 mm, sumbu Y: 150 mm, sumbu Z: 340 mm. Dudukan alat: MK 4 dengan ulir penarik S 20 x 2. Jenis kepala frais: Kepala frais vertikal. Jenis meja: Meja tetap. Area penjepitan meja: 600 x 210 mm. Ukuran alur T: 12 mm. Feed sumbu X: 290 mm, sumbu Y: 150 mm, sumbu Z: 330 mm. Berat: 700 kg. Mesin Frais Deckel FP1. Nodpfxey Ddd Ue Afvswk

Kondisi: baik (bekas), Tahun pembuatan: 1974, nomor mesin/kendaraan: 571, Penawaran 25456 Data Teknis: - Kapasitas pengeboran: 28 mm - Dudukan spindle bor: MK 3 - 8 kecepatan spindle bor: 100 - 1120 rpm - Area meja: 400 x 400 mm Nwjdpfx Aoyfn Npjfvjk - Unit bor dapat diatur ketinggiannya dengan engkol tangan - Jarak terkecil / terbesar antara meja dan spindle bor/frais: 300 / 600 mm - Stroke spindle bor: 120 mm - Jangkauan spindle bor: 260 mm - Sistem pendingin - Lemari dasar mesin dengan pintu - Penggerak: 400 V / 1,5 / 2,3 kW - Kebutuhan ruang sekitar: L 500 x T 1800 x D 950 mm - Berat sekitar: 200 kg

Kondisi: baik (bekas), Tahun pembuatan: 1996, de20240618a Nedpfxoyw Sire Afvewk

Kondisi: baru, Tahun pembuatan: 2026, CORMAK SP150 Polishing Machine – Industrial Disc Polisher for Deburring and Surface Finishing The CORMAK SP150 Satin Polisher is a highly efficient disc polisher designed for professional surface finishing, deburring, matting, and high-gloss polishing. It is the ideal solution for production plants, metalworking shops, tool workshops, and metal processing facilities where durability, precision, and reliability are key. The robust construction features a modern, cast housing manufactured according to current industrial standards, as well as a rotor fitted with NSK brand bearings for exceptionally quiet and smooth operation. Thanks to its tapered spindle thread, quick and secure mounting of various types of polishing wheels—from soft to hard—can be achieved, depending on processing requirements. This industrial polisher is equipped with a powerful 0.5 kW motor, providing substantial power reserve and reliable operation even under demanding production conditions. The technical solutions implemented make the SP150 model an extremely versatile tool, suitable both as a satin polisher for matting and satining surfaces, and as a high-gloss polishing unit. If you are looking for a robust, versatile device, CORMAK satin finishers are a choice that meets the expectations of even the most demanding professionals. Key features of the device: - Industrial-grade disc polisher - Satin polisher for matting, deburring, and surface finishing - NSK bearings – reliability, quiet operation, long service life - High-quality cast housing – durability and structural rigidity - Powerful 0.5 kW motor – performance for professionals Nwsdsyb Etwepfx Afvsk Technical parameters of the SP150 satin polisher Polishing disc diameter: 150 mm Polishing disc thickness: 26 mm Polishing disc bore: 16 mm Rotational speed (max): 2850 rpm Motor power: 0.5 kW Voltage: 230 V Dimensions: 470 x 200 x 280 mm Weight: 13.8 kg