Kamar uji iklim 350 liter dengan kelembapan

CTS C -40/350 -40°C /+180°C

Kondisi: sangat baik (bekas), CTS Model: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in potentially explosive atmospheres in Zone 1. This means it is intended for use in environments where explosive atmospheres may arise. Such equipment is specially designed and tested to ensure safety in these environments. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min Heat compensation: - approx. 3500 W at +20°C - approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ +3.0 % r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specifications: Refrigeration unit: water-cooled, low-noise, fully hermetic, continuously variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Insert grid: Stainless steel, supporting surface 620 x 600 mm, maximum load per grid 35 kg, maximum total grid load 100 kg Control System: 32-bit controller LCD operating panel Digital display of set and actual values Numerical input of set values Plain text error messages RS 232 interface Ethernet interface Free switching channels for customer-specific test specimen control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Hnjdpjygui Sjfx Ag Roi Nominal current: 14.3 A Protection class: IP 54 Sound pressure level: [value missing]

Kondisi: baru, The NEOMIG-i 500 G is a three-phase, multi-process welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergy functions simplify setup and reduce spatter during welding. Equipped with the WF wire feeder, it provides precise control over welding parameters to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm Hnedpfomxkdpjx Ag Roi - Flux-cored wire (polarity reversal): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Kondisi: bekas, Tahun pembuatan: 2001, Jumlah unit cetak: 8 Lebar web: 1.270 mm Lebar cetak: 1.200 mm Pengulangan cetak: 300 - 1.000 mm Jenis unwinder: Double Axis Drop Splice Jenis rewinder: Turret Fully Automatic Splice Pengeringan: Udara panas - pemanas listrik Kamera video: BST Euroscope Panduan web: Ya Material: Web plastik Jumlah doctor blade camber: Ya Pompa tinta: 8 Jenis tinta: Berbasis pelarut Transmisi: Bull gear Hedpfx Agex E Tm Us Rsni Registrasi panjang/samping: Dikontrol jarak jauh bermotor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Product features: rectangular and dimensionally stable; labelling capacity: 30 products/min; compressed air connection: 6 bar; printing method: thermal transfer printing; product weight range: 15 g - 1,000 g; machine weight: approx. 600 kg. Top label length range: 15 mm - 160 mm; top label width range: 30 mm - 300 mm. Bottom label length range: 15 mm - 120 mm; bottom label width range: 30 mm - 300 mm. Product dimensions X/Y/Z top: 30 mm - 300 mm / 50 mm - 250 mm / 50 mm - 150 mm. Product dimensions X/Y/Z bottom: 140 mm - 300 mm / 50 mm - 250 mm / 50 mm - 200 mm. Product dimensions X/Y/Z top and bottom: 140 mm - 300 mm / 50 mm - 250 mm / 50 mm - 150 mm. Includes a two-metre-long and 150 mm wide conveyor belt and a 180° Dorner conveyor. Documentation available. On-site inspection possible. Hnedpfovcc S Asx Ag Rei

Tahun pembuatan: 2024, Kondisi: baru,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Printing technology: Piezo DOD printheads: Xaar 1001; Resolution: 720x360 dpi; Drying: 1x UV GOZ and 1x UV FOZ Höhnle with 7.2 kW, Pinning system (LED) after printing unit 1+5; Extraction: in drying unit for cooling the UV lamps and to minimize odors and improve sensor performance; Inert gas system: oxygen-reduced curing unit (Inert Gas System), Consumption: under 6m³/h; Printing method: roll-to-roll; Web width: 350 mm; Print width: 330 mm; Repeat length: min./max. of printable section length 10–1000 mm; Printing tolerance: single repeat +/-0.2 mm, cumulative repeat: +/-1.5 mm (per meter); Register accuracy: +/-50 μm; Max. speed: 48 m/min with 4 colors, depending on ink coverage, white with 30 m/min; Speed must be preselected from 18 to 48 m/min; Print pretreatment: Corona with 1500 VA; Web cleaning: Polymer rollers LC 350; Expanding shafts: for sleeves with 76 mm core diameter for both unwinding and rewinding; Expanding shaft clamping: pneumatic, releasable to allow rotation of the winding mandrel; Max. roll diameter for unwind/rewind: 610 mm; Max. roll weight for unwind/rewind: 120 kg. Power consumption: approx. 39 kVA / 60 A; Air consumption: 100 NL/min; Cooling capacity: approx. 60,000 BTU/h = 18 kW; Data interface: USB 2.0, Ethernet; Data format: PDF-X1 or X3 or EPS or AI; Length: 4550 mm; Width: 1750 mm; Height: 2200 mm; Weight: approx. 3 t. Comes with documentation, chiller, and inks. The machine is fault-free, complete and ready for operation, and has been regularly maintained. On-site inspection is possible. Hnsdpfexz Ewnsx Ag Rji

Kondisi: diremajakan ulang (bekas), Used, modernized 3D CNC coordinate measuring machine. ZEISS Prismo 16 – used system, configuration freely selectable Measuring machine with moving gantry design Granite table plate Equipment can be individually configured according to your requirements. Further details available upon request Measuring range: X = 1600 mm - Y = 3000 mm - Z = 1000 mm Hjdswptpkopfx Ag Rjni Measurement uncertainty: depends on the selected measurement system Price: on request – let us know your desired configuration >>> Single unit – available while stocks last

Kondisi: bekas, en-Technische Details: Welding current: 500 A Machine weight approx.: 129 kg Dimensions (L x W x H): 1.1 x 0.7 x 1.2 m Hnjdowtctmopfx Ag Rji Control: Display for welding current with 2/4-stroke switching, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze Shielding gas: Solenoid valve without pressure regulator Torch package with 3.0 m hose length Torch head: gas-cooled Earth clamp with 2.5 m earth cable Wire feed: 4-roller drive for wire diameter 1.0/1.2 mm

Kondisi: bekas, Tahun pembuatan: 2014, Overview: This complete brewery equipment set is primarily from 2014 and is available due to the business closing. The equipment has already been dismantled and properly stored. Scope of supply: Water softener, Compressor | Josval Sauber 240 D, Mill | Robix ROPPI 250, Thermindus Boiler Ps (6 Barg) PL (10.4 Barg) Ts Max 165, Ts Min 10, 34 kW, Portable Pump 2.20 kW INOX, Hoses, connectors, keys, Manual isobaric bottling machine with 4 filling stations, Automatic labelling machine | Arca L10-8128, 2x rotary tables with controller, 100 cm diameter, for infeed and outfeed of bottles or cans, Videojet 1220 batch coder, Infrico undercounter refrigerator with 3 doors. Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, mash tun 680 litres, false bottom, rotating blades, transfer and recirculation pump. 720L boiler with whirlpool, boiler pump and Spadoni plate heat exchanger. Hot water tank | Spadoni | 10 hl. Cold water tank | Spadoni | 10 hl. Mixing tanks | Spadoni | 1.5 hl with tangential inlets. Mixing tanks | 1.5 hl with tangential inlets. 2x isobaric fermenters | Spadoni | 2.5 bar 15 hl. 2x isobaric fermentation tanks | Spadoni | 2.5 bar 30 hl. 2x atmospheric fermentation tanks 1 bar pressure 1.2 hl | BREW TECH. Atmospheric fermentation tank 1 bar pressure 1.2 hl (jacketed) | BREW TECH. Hnedpfotka Aqox Ag Rei

Kondisi: bekas, Tahun pembuatan: 2004, Overview The filler was manufactured in 2004. In recent years, it was operating in a brewery in France. The entire brewery has been sold to a company in Belgium. The filler is no longer required and is therefore available for sale. It is suitable for filling both beer and soft drinks. The machine has been dismantled and is stored properly. Technical data: Hnjdpsl Hxl Ijfx Ag Rsi - Capacity: 2,500 bottles/hour at a volume of 0.75 l/bottle; 3,300 bottles/hour at a volume of 0.33 l/bottle - 20 rinsing stations - 20 filling valves - 3 capping units - Formats: 0.33 l; 0.75 l - Working direction: left to right