Beli Mesin pelapis pinggir bekas (8)

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg Gkedpfxslht Hwj Ag Rof - Available in calendar week 4 -

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Gkedpfx Aei Am U Deg Rjf Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Gedpfx Ajlht Hzeg Rskf

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels Gjdjhqadcspfx Ag Rokf For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, E450PM - MESIN EDGE BANDING OTOMATIS V000047 LME450PM-5 dengan unit pemotong join Mesin dalam kondisi sangat baik TEGANGAN 400/50/3 KONTROL DENGAN LAYAR SENTUH 7" UNIT PEREKAT YANG DAPAT DITUKAR VR - UNIT POTONG MULTIFUNGSI Alat untuk pemotongan lurus/melengkung KIT ALAT R=2 mm SCRAPER PERMUKAAN UNIT PEMISAH PENERANGAN LED INTERIOR DOKUMENTASI DALAM BAHASA JERMAN LAMPU INFRARED untuk pemanasan panel UNIT SCRAPER Gkodpfx Agoxac Hwj Rsf Lokasi: dari stok 54634 Bitburg - Tersedia segera -

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit Gksdpfji Am Ukjx Ag Rsf 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Gkjdpfei Anadox Ag Rof

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Gjdpfjxvirfjx Ag Rekf Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -