Beli Mesin press bodi bekas (8)

Kondisi: sangat baik (bekas), hess-korpuspresse-export Gsdpfx Agjxgvwps Rjkf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Gksdpjw Td A Isfx Ag Rof - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Gkodpfx Ajxvitieg Ref Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Gjdpob Eln Djfx Ag Rokf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Gkjdpow Tdymefx Ag Rjf Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Surface - Case Clamp Gkedow Sgnkjpfx Ag Rsf GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 941, tinggi kerja: 1.350 mm, lebar kerja: 600 mm, panjang kerja: 2.500 mm, DETAIL TEKNIS Panjang tekan: maks. 2.500 mm Tinggi tekan: maks. 1.350 mm Kedalaman kerja: maks. 600 mm DETAIL MESIN Data listrik Tegangan nominal: 3/N/PE/400 V Arus nominal: 11 A Daya nominal: 4,7 kW Frekuensi: 50 Hz PERLENGKAPAN Balok tekan vertikal dan horizontal digerakkan secara elektromekanis Pembentukan tekanan melalui motor gearbox yang dikontrol frekuensi Gksdpfexnyg Rsx Ag Ref Tekanan tekan vertikal dan horizontal dapat diatur secara terpisah Waktu penekanan dapat diatur

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Gkedpfxeiidm No Ag Rsf Location: Ex stock 54634 Bitburg - Immediately available -