Genset diesel baru, pembangkit listrik, genset darurat, generator listrik

DAEWOO DAGFS 100

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 185 h, kecepatan maksimum: 50 km/j, ukuran ban depan: 540/65 R28 | 0%, ukuran ban belakang: 650/65 R38 | 0%, ukuran ban: 650/65 R38, jumlah tempat tidur: 35,

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 248 h, kecepatan maksimum: 50 km/j, ukuran ban depan: 600/70 R30 | 0%, ukuran ban belakang: 710/70 R42 | 0%, ukuran ban: 710/70 R42, jumlah tempat tidur: 43,

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, frekuensi input: 50 Hz, Manufacturer: Pramac GWB 22 Y CDS Soundproof canopy: 64 dB(A) at 7m Continuous power: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Emission stage: STAGE V Cooling system: Water Cylinders: 4 in-line Displacement: 2,190 cm³ Aspiration: Naturally aspirated Speed: 1,500 rpm Engine control: Mechanical Electric start Consumption at 3/4 load: 3.87 liters Consumption at full load: 5.17 l/h Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Regulation: Electronic (AVR control) Manual control panel: - Key start - Voltmeter, ammeter, hour meter Bsdpfx Aeq A U Axea Tsld - Engine fault indicator Sockets: 1 x Schuko 220V 2 x CEE 16A - 230V 1 x CEE 16A - 400V 1 x CEE 32A - 400V Dimensions: Length: 1,645 mm Width: 870 mm Height: 1,072 mm Tank capacity: 51 liters Weight: approx. 560 kg Lifting eye Forklift pockets

Kondisi: bekas, Tahun pembuatan: 1994, Generator listrik darurat jarang digunakan, terhubung ke sistem pemanas sehingga tidak memiliki pendingin air. Tersedia total 2 unit, harga berlaku untuk 1 unit. Bljdpfsxdc Ehox Aa Tsd

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.470 kg, jenis bahan bakar: diesel, kapasitas tangki: 230 l, warna: beige, daya: 27,21 kW (37,00 hp), arus keluaran: 47 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 17 kW (23,11 hp), daya nominal (semu): 22 kVA, daya kontinu: 20 kW (27,19 hp), daya semu kontinu: 20 kVA, panjang total: 2.800 mm, lebar total: 1.063 mm, tinggi total: 1.703 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Cummins, jenis pendinginan: air, AVS diesel generator set DW 20 CU 15 AK14A PRP output: 16 kW / 20 kVA ESP output: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emissions standard: - Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford PI114D Voltage: 400/231 V Control panel: InteliLite AMF Type: Canopy set; weatherproof, sound-insulated • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (230 L) and forklift pockets Blsdowu D Unopfx Aa Ted • Voltage and frequency regulation according to ISO 8528-5 • Set suitable for stationary use only Please note that these generator sets are not approved for mobile use in accordance with current EU regulations. The generator sets are sold as B-stock. B-stock means that the units may have visual defects such as flash rust or casing corrosion. However, these defects do not affect the functionality or performance of the generator sets in any way. By accepting this offer, you expressly acknowledge the aforementioned characteristics and condition of the generator sets.

Kondisi: baru, Tahun pembuatan: 2022, Brand new generator set, consisting of two gensets housed in a single enclosure, based on Scania engines. Synchronisation with other sets or gensets is possible, and optionally also with the mains. Maximum power E.S.P. [kVA] / [kW]: 902.0 / 722.0 Rated power P.R.P. [kVA] / [kW]: 820.0 / 656.0 Controller type: ComAp InteliGen 500 User-friendly, intuitive graphical interface. Bledpjmrqi Eefx Aa Ted

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm Bodpofc T Tqofx Aa Told - Weight: 2749 kg

Kondisi: bekas, Tahun pembuatan: 2000, Grinding length: 800 mm Bledpfeu Hag Nsx Aa Tod Center height: 150 mm Control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swiveling: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight approx.: 4.0 t Space requirement approx. (LWH): 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including diamond dresser -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle attachments

Kondisi: baru, NEW MACHINE - Wet suction available in steel or stainless steel - Extraction capacity: 1,650, 3,750, or 7,000 m³/h - Motor: 3, 5.5, or 15 kW Bsdpfx Aeci Tlrsa Tjld

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Bodpfx Aaohpktvj Told Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.