Crane yang terpasang pada truk

DAF CF 440 mit Ladekran HMF 2120K4

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) Lasdpfx Ajyidvdoaiog - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: sangat baik (bekas), jarak tempuh: 493 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 06/2024, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, bahan bakar: diesel, rem: pengereman mesin, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2024, jam operasional: 1 h, Perlengkapan: ABS, AdBlue, derek, filter jelaga, kendali jelajah, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: baik (bekas), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, condenser, motor compressor, cooling machine, cooling unit Lasdpfx Aoguzr Hjaisg -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1,450 rpm -Displacement: 22.14 m³/h -Max. allowable pressure: 24.5 bar -Quantity: 2x cooling units available -Price: per unit -Dimensions: 550/315/H390 mm -Weight: 88 kg

Kondisi: bekas, Tahun pembuatan: 2012, 2012 | Nissan Cabstar Prancis, Platform Kerja Angkat Topy 100-1 | Platform Kerja Angkat yang Dipasang pada Truk Bekas | 80618 km 📍Lokasi: Jerman 🚛 Pengiriman tersedia ke lokasi Anda – Gunakan kalkulator pengiriman kami untuk memperkirakan biaya transportasi! 💰 Beli Sekarang seharga 15.000 EUR atau Ajukan Penawaran. Pembayaran saat pengiriman tersedia dengan biaya yang terjangkau (tergantung persetujuan)* 👷‍♂️ Diperiksa oleh ahli independen 50 titik inspeksi, 49 disetujui ✅, 1 tidak sempurna ℹ️, 0 biaya tambahan ⚠️ 📌 Komentar Inspektur: Laodpfx Aaezl E Dceijg Mobil dalam kondisi baik, perpindahan gigi lancar, kondisi bagus, rangka pendukung dilapisi seng, tidak ada karat. 📄 Ingin melihat inspeksi lengkap, foto tambahan, atau video? Tips: Referensi "41123 Equippo" umumnya digunakan saat mencari informasi lebih detail secara daring. 💡 Mengapa mesin ini dan layanan kami unggul: ✔ Inspeksi menyeluruh oleh para profesional ✔ Pengiriman ke lokasi kerja tersedia ✔ Jaminan uang kembali ✔ Opsi pembayaran yang aman dan fleksibel 🔄 Apakah Anda mempertimbangkan opsi peralatan lain? Kami menawarkan alat dan sumber daya yang bermanfaat bagi semua pemilik dan operator peralatan – mudah diakses di platform kami.

Kondisi: sangat baik (bekas), jarak tempuh: 252.000 km, pendaftaran pertama: 07/2015, jenis bahan bakar: diesel, konfigurasi gandar: 8x2, bahan bakar: diesel, rem: pengereman mesin, warna: merah, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, panjang ruang muatan: 6.100 mm, Tahun pembuatan: 2015, jam operasional: 2.708 h, Perlengkapan: ABS, derek, kendali jelajah, kopling trailer, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik,

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), Rundbogen-Industriezelt, Marke SUIHE, neu, Modell: XL-308515R, Baujahr 2016 Abmessungen: Breite 9,15 m x Länge 26 m x Höhe 4,57 m Konstruktion: Verzinkte Stahlkonstruktion, Rohrdurchmesser Φ60*1,8 mm und Φ40*1,5 mm, gefertigt aus Q215 Stahlrohren gemäß GB/T700-2006 Standard. Planen: PVC-Material, Dicke 300g PE, doppellagig mit PVC beschichtet, Standardfarben ab Werk: grün oder weiß. Zugangstürtyp: Einfache mechanische Tür Türmaße: 3,5 m x 3,5 m Schneelast: 2,28 kpa (Druckspannung bei Verformung) Windlast: 80 km/h Reguläre Nutzungsdauer: Über 15 Jahre Einsatzbereiche: Industrie, Landwirtschaft, Materiallager, Fahrzeuglagerung, Hangar Erhöhte Widerstandsfähigkeit, einfache Montage und Demontage, hohe Kapazität, ausgezeichnete Stabilität. Planenfarbe: grün mit weiß. Modellmaße in Meter: XL-308515R 9,15*26*4,59 (B*L*H (m)), 300g PE Metallbox-Verpackung Transportbox-Außenmaße: 2,95 m * 0,75 m * 1,18 m Zeltgewicht: 1300 kg Ledpfei Hc Drsx Aaieag Verwendungszwecke SUIHE Industriezelt: 1. Landwirtschaft: Tierunterstand und Heulager 2. Luftfahrt: Flugzeughangar 3. Maschinen-, Geräteeinlagerung, temporäre Halle 4. Schifffahrt: Schiffslagerung, Container 5. Garage für Fahrzeuge etc. PREIS: 8.500 Euro + MwSt., verhandelbar, FCA Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Deutsch. / We speak English. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 511001M, daya nominal: 160 kW (217,54 hp), Lindemann ZB 120 x 100 lengkap dan sepenuhnya berfungsi - Penggerak Schorch 160kW - Kopling fluida Voith - Konveyor pengumpan baja berpalang - Vibrator ekstraksi Cyrus - Penarik as - Unit hidrolik - Jeruji cadangan - Palu - Berbagai suku cadang aus Laedpoyizcqefx Aaiog

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, The machine has been out of use and stationary for several years, therefore it requires maintenance before being put back into service, which will be the responsibility of the buyer. Lsdpfx Astu U Ebsaijag

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor Lasdpfx Aov Ig Aveaijg - Spindle cooling - Parts removal

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control system, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret configuration, with turrets 1 and 2 each offering X, Z, and Y axes, while turret 3 is dedicated to counter spindle operations. All three disc turrets are fitted with 10 stations each and provide highly flexible complete machining via driven tools at up to 6,000 rpm. With a gantry loader, conveyor belt, C-axes on both main and counter spindles, and powerful spindle drives, this machine is ideally suited for the productive series production of complex turned/milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged gray cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, Size 140 cylinder Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis travel: 700 mm Z-axis rapid traverse: 50 m/min Tool carriers / Turrets Configuration with 3 disc turrets, each with 10 stations. Tooling system at 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 320 / 550 mm as per documentation Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis travel: 110 mm Z-axis travel: 550 mm Y-axis travel: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Exclusively for operations on the counter spindle X-axis travel: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical features as per documentation: Lajdpsy Tmhzofx Aaiog - Gantry loader with numerically controlled Z-axis - Workpiece removal from main or counter spindle to conveyor belt - Remnant workpiece removal from the main spindle into remnant bin Gantry loader: Travel speed: 100 m/min Travel range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Flow rate: 19 l/min Chiller capacity: 13 kW Coolant system: Pump capacity: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm