Mesin las titik, mesin las tonjolan, mesin las resistansi AC

DALEX PL 63

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Nominal power at 50% duty cycle: 63 kVA Short-circuit current: 26.3 kA Electrode force: 65-390 daN / single stroke Throat depth: 450-750 mm, infinitely adjustable --- Control unit: MPS 15036 (5-phase, 1-program) --- Incl. additional options: - Double foot switch for 'no-voltage positioning' --- 6-month warranty --- Training and commissioning on request --- Spot welding electrodes and spare parts available from stock Kjdpfx Ajv T Unwjcisdn --- Further information available on our website

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase Kodoym T Itopfx Acisdn • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: bekas, de-fi Kdjdpfeu Nv Eaex Acijn

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BMP 6-5, kedalaman tenggorokan: 250 mm, berat keseluruhan: 650 kg, jarak lengan: 590 mm, daya nominal (semu): 80 kVA, Produsen: Nimak Tipe: BMP 6-5/80 Deskripsi: Mesin Las Tonjolan Ksdpfx Acjv N U Tloiodn Daya Terukur: 80 kVA Gaya Maks.: 1100 daN Jangkauan: 250 mm Bukaan: 350 - 590 mm Berat tanpa panel kontrol: 650 kg

Kondisi: bekas, AC spot welding machine, projection welding machine ARO type MA 350 DC AC resistance welding machine Mach. no. MA35031332 / 9731122B110 Year of manufacture: 1997 Output at 50% duty cycle: 30 kVA Output at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Throat depth: 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke: max. 80 mm Electrode force: max. 730 daN (at 6 bar), steplessly adjustable Operating air pressure: 0.5 to 6 bar Power supply: 400 Volt, 50 Hz Connected load: 75 kVA / 63 Amps / cable cross-section 3x 16 mm² Maximum sheet combination: 5 mm + 5 mm - Welding control: ARO Micro 2X16 III Version 6Z2P Type 1B (6 timers - 2 programs) - Stepless welding current adjustment via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating modes: single stroke and serial spot welding - Electrode force steplessly adjustable via air pressure - Water-cooled by external recirculating cooler (water chiller not included) - Electric footswitch - Control cabinet with controller mounted directly on machine Kodpjhpf Iyefx Acijdn - PC interface RS 485 - Weld counter - Operating manuals for control unit, spot welding machine and electrical schematic included Space requirement (W x H x D): 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Kondisi: baru, Tahun pembuatan: 2026, Machine type: EVP 30 Manufacturer: ERBA Power (kW): 0.95 Total capacity: 30 litres Description: The EVP 30 vibratory finishing machine from ERBA is ideally suited for processing small workpieces or as an entry-level and pilot system. It features a flat-bottom processing bowl without integrated separation. Emptying or separation is carried out via bottom discharge (manual or pneumatic). The motor speed can be infinitely adjusted via a frequency converter (optional). The unit can be equipped with fully automatic PLC control (optional). ERBA vibratory finishing machines are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the processing bowl. As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The pictures may show the machine including optional accessories, which are available at extra cost. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. Kodeyq Ripspfx Acisdn The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This listing serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first instance, we will provide you with a non-binding offer, which will also include our general terms and conditions with legal notice and information on your right of withdrawal, before a purchase contract is concluded.

Kondisi: bekas, Tahun pembuatan: 1992, press_specs_01 Kodpjvuui Rofx Aciedn

Kondisi: baru, Tahun pembuatan: 2025, Rated output at 50% duty cycle: 80 kVA Short-circuit current: 35 kA Kjdjxl Uudspfx Acisdn Electrode force: 100–600 daN / single stroke Throat depth: 350–650 mm, infinitely adjustable --- Control: MPS 10beta (5 time settings, 8 programs) --- Warranty: 12 months --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- For more information, visit our homepage: wahlenmeier.de

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 00026, berat keseluruhan: 400 kg, en Kdjdowrp Iuspfx Acien

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Kdjdpfx Acey Au Eysisn