Mesin las titik

DALEX PMS 10-2

Kondisi: bekas, Dalex Works PMS 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage: 380 V - 50 Hz No-load voltage: 5.6 V Electrode force: 65-390 daN Dusdog Rcpxjpfx Aftop Machine weight: 341 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 48.274 h, jumlah sumbu: 6, gaya penekanan: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, an electrohydraulic top drive, and a 2D graphical control DA 69 on a 10.4" color screen. The machine is equipped with a 6-axis CNC backgauge, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced under a TRUMPF maintenance contract. Please contact us for more information about this machine. • Clear column spacing: 3680 mm • Installation height: 535 mm • Control unit: 2D graphical control DA 69 on window with 10.4" color display Dodpfjx D D Hyex Aftoup • Electrical equipment: for 3-phase 400V / 50Hz • The machine has been serviced annually • Maintenance contract available • Rigid machine frame, fully welded steel construction • Press beam with high flexural strength • High-dynamic electromechanical direct drive (torque motor) • Electrohydraulic top drive via proportional valves • Modern block hydraulic system • Inductive length measurement system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper Modufix tool clamping system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numeric workshop programming • Integrated Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-capable, teleservice via modem • Electrical cabinet air conditioning • Side-mounted safety doors and rear safety guard • Two-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomic package: comfortable front work area and footrest • 2 storage consoles and 2 document trays • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tooling maintained, all within tolerance Additional Equipment: • Backgauge system with 5 axes and electrical cabinet air conditioning • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support arms • 1x bending aid with 900 mm parking position • Table extension for base table / auxiliary table Technical Specification: Bending length: 1020 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, de Djdpfx Afevuvbzotoup

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 3.200 h, gaya penekanan: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift +230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Robust base and manipulator in die-cast aluminium construction - Load capacity 60 kg, sheet plus gripper Duedpfx Afjxayl Detop - Low floor track in welded construction - Sheet sensor for contour detection - Rotary union for easy gripper change Gripper coupling on BendMaster - Sensors for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Remote service via internet - Comfort operation via monitor, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper kit without singulation (material for 3 grippers) + Modular vacuum gripper kit with singulation (material for 3 grippers) + Tongs gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-side door for safety fence (or left when combined with ToolMaster) Machine - Robust machine frame in all-steel construction - Press beam - Spherical mounting of the press beam with tilt - Electro-hydraulic upper drive with 4-cylinder technology - Optical setup and positioning aid with control valves - Generous bending clearance - Flat front covers - Blockwise hydraulics - Electronic pressure scale - Measuring system with glass scale and deflection compensation - Hydraulic oil inside the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge system - 2-axis backgauge system, X- and R-axis Tool clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool shifting, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touchscreen - Network capability - Remote service via internet Operation - Operator console with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety devices - CE marking

Kondisi: baru, Tahun pembuatan: 2026, Build size: 6 Nominal heat output: 170 kW -- Complies with 2nd BImSchV and CE -- Combustion chamber fully lined with fireclay For spaces up to: 4,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, wood briquettes Fuel consumption: 40–50 kg/h Dusdodlhdbjpfx Aftep Fan air volume, free blowing: 14,000 m³/h Discharge opening: Ø 700 mm Flue gas outlet connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 Volt

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 7.238 h, Technical data Pressing force: 360 kN Bending length: 1020 mm Usable installation height: 295 mm Djdpfxeyfxfnj Aftsup Free distance between uprights: 932 mm Throat depth: 150 mm Working height¹: 1150 mm Backgauge travel parameters Y-axis stroke: 120 mm X-axis travel: 235 mm max. stop area In X-direction: 500 mm R-axis travel: 75 mm Control Basic configuration: Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Connection values Electrical connection approx.: 6 kVA Dimensions and weights Required space (length × width): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Standard equipment of the TruBend 7036 Machine Rigid machine frame: Welded construction, stress-relieved heat treated for standing or seated operation; includes two side columns, table, and tie bar. Ram: Stress-relieved heat treated, deformation-optimized. Drive system: Highly dynamic, electromechanical direct drive (torque motor), max. working speed 25 mm/s (depending on selected die width and operation cycle). Inductive length measuring system with temperature compensation Control cabinet climate control Ergonomic machine design Backgauge system 3-axis backgauge system (one backgauge finger): Highly dynamic safety 3-axis backgauge system. Rack and pinion drive, CNC-controlled X-, R-, and Z-axes freely programmable, allowing precise adjustment of backgauge depth and height for maximum accuracy. Backgauge finger made of fiberglass with hardened steel stop. Tool clamping Upper tool clamp: Enables fast and precise tool change, both vertically and horizontally; fixed, self-centering. Lower tool clamp: Individual V-dies mounted on a special plate. Clamping: Manual with hardened clamping and holding strips. Safety Safety device: Emergency stop push button, two-hand foot pedal for standing and sitting operation, sliding side safety doors, rear and side safety guards. The side guards are made of transparent, impact-resistant plastic. Control TRUMPF TASC 6000: The TRUMPF TASC6000 control is based on a Windows XPe operating system, with 1.1 GHz Pentium M, 15" touchscreen, USB interface, and 1 GB RAM. Optional equipment Backgauge system 6-axis backgauge system (2 backgauge fingers) Tool clamping Tool clamping for AMADA US-style upper tools (manual) Safety BendGuard (with block laser): Optoelectronic safety device enabling rapid and safe bending. Permitted ram speed in foot mode: 220 mm/s Control Graphical workstation programming

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, Fully automatic swivel bending machine with storage interface Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen Dsdpfx Afjx Tii Ieteup TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. part size: 3,120 x 1,500 mm Max. part diagonal: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (swiveling blank holder tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (Min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis back gauge - Optical angle assistant - Blank holder tools - ToolMaster - Operating unit with foot switch - ACB Laser (Automatically Controlled Bending) - Set of 3-face vacuum modules - Set of 2-face magnetic modules - Bending tools OBW90 and UBW90 - Swiveling blank holder tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and storage interface (adaptation required for use without storage) - Loading and unloading unit with storage interface (without pallet) incl. sheet separation system - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information can be found in the images. This used machine can be inspected under production conditions. All information without guarantee – sale under exclusion of any warranties or guarantees. Subject to prior sale.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 7.900 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, produsen pengendali: Siemens, jenis laser: Laser CO₂, produsen sumber laser: Trumpf, jam kerja laser: 7.850 h, daya laser: 3.200 W, diameter punching: 76 mm, Perlengkapan: alat penukar nosel, ekstraksi asap, ekstraksi debu, henti darurat, kendali jauh kaki, penghadang cahaya keselamatan, perangkat ganti cepat, sistem pelumasan terpusat, unit pendingin, Laser TruFlow 3200, including LensLine with optimized standby Nozzle change device Multitool drive "Multishear" function "Multibend" function Tapping function Fast "Marking" / "Beading" function Engraving function Rolling and deburring function Dodpfxsx N Hyvo Aftoup "Softpunch" function Active Die Stripline Repositioning with pneumatic cylinders Dampened installation Chip conveyor with container Ball work table with brush inserts Blow-off device SheetMaster (3000 x 1500) Sheet separation system with side air blow Additional positioning guides for format (2500 x 1250) Additional positioning guides for format (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good parts conveyor on punching side Good parts conveyor on laser side Warehouse interface No. 21 RTC tool cassettes incl. die holder plate

Kondisi: baru, Tahun pembuatan: 2025, punktschweissmaschine-vorfuehrmaschine-2025 Dodpfx Ash Nu A Neftoup

Kondisi: sangat baik (bekas), Double-head projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-stroke cylinders with approach stroke Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Dodpfxsd Ip Als Aftjup Cylinders can be operated in cascade or simultaneous mode Weight: 1090 kg Machine is currently being refurbished