Mesin gerinda silinder

Danobat RS-4000 S5

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 66.600 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Here is a professional, context-appropriate English translation adapted for use on platforms like Machineseeker or TruckScout24: --- We offer: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel paths: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measurement system - Fully enclosed cabin - 3D control - DMG ERGOline Control - Direct measurement systems in NC swivel rotary table, including table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 L tank, including rotating inspection window, sealing air, linear measuring systems, bed rinsing - Rinsing gun - Mechanical oil and emulsion mist separator - Blowing air through spindle center - Operating mode 4 - Machine preparation for handling systems, comprising: - Automatic side loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection/deselection of handling system via switch at operator panel - Additional rinsing in working area - Machine preparation for job management - Operator panel on left side - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side hydraulic clamping, 1 circuit: - Hydraulic clamping circuit, 30 – 240 bar, pressure setting via proportional valve control - Includes rotary union upgrade to 4 channels Operating hours: approx. 66,600 h Psdsxgnz Tepfx Abuegg Spindle hours: approx. 44,800 h Robot shown in the pictures is not included in the scope of delivery. The machine will be available from approx. October/November 2025. Ball screw drives and linear guides on the X and Z axes have been replaced. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical specifications and details are subject to change and errors. Subject to prior sale! --- If you need the translation in another language, please specify your target language.

Kondisi: bekas, Tahun pembuatan: 2011, Bar diameter 32 mm Spindle bore 38 mm Turning length 320 mm Spindle speed 8,000 rpm C-axis 0.001° Subspindle pick-off station 32 Turning length 150 mm Spindle speed 8,000 rpm C-axis 0.001° Number of tools 4+7+6+10 = 27 Number of milling stations 4+4 Control system Mitsubishi M70 Number of axes 5 + 2x C-axis = 7 axes Chip conveyor: yes, LNS Total power requirement: 7.5/5.5 kW Pjdpfxsw Ed Tfe Abuogg Machine weight approx. 3,300 kg Space requirement approx. 2.5 x 1.2 x 1.82 plus FMB m CNC Swiss-type lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Very good condition! Main spindle motor and bearings are new. Supplied with all accessories, clamping devices, manuals.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 00287, Technical Data Manufacturer: Brown & Sharpe Model: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring Range X = 1000 mm Pgsdpji Dpggsfx Abueg Y = 1500 mm Z = 900 mm Measuring Table Length = 2280 mm Width = 1145 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning available! We will be happy to provide you with a detailed quotation. Note: Our offer is directed exclusively at professional customers. (Specifications, information, and prices subject to change and prior sale!)

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Podpfxevvvw Es Abusgg Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Kondisi: baik (bekas), Tahun pembuatan: 2008, panjang penggilingan: 1.250 mm, panjang meja: 1.250 mm, beban meja: 1.200 kg, lebar meja: 500 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 1.000 rpm, berat keseluruhan: 9.300 kg, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, daya: 185 kW (251,53 hp), tegangan masuk: 400 V, kebutuhan tinggi: 2.870 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance from table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Pjdpfeu Hiq Rox Abujgg Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data.

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 119, Lg.Nr. 24217 Technical Data: - Max. working width: 2520 mm - Max. material thickness at 40 kp/mm² tensile strength: 3.5 mm - Bending angle adjustment: pre-selectable - Upper beam drive: 400 V / 1.1 kW Pedpetpnpljfx Abusgg - Bending beam drive: 400 V / 4.0 kW - Space requirement (approx.): W 3900 x H 1550 x D 1200 mm - Weight (approx.): 4500 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2010, kapasitas angkut: 200 kg, jangkauan lengan: 2.400 mm, tr Pjdpfxsq Dpxde Abusgg

Kondisi: baru, PUSAT PEMROSESAN BARU (FABRIK BARU) Kontrol lintasan digital HEIDENHAIN TNC 7 dengan layar 19" Paket HEIDENHAIN (motor, sistem pengukuran, dan handwheel) Sumbu-X: 650 mm Sumbu-Y: 700 mm Sumbu-Z: 645 mm Pgedohy Artjpfx Abujg Ukuran meja – Ø: 410 mm Diameter benda kerja maksimum: 500 mm Kecepatan spindle maksimum: 12.000 rpm (berpendinginan oli dengan MMS) Taper spindle: SK 40-BIG PLUS (BVD 40) Daya motor spindle maksimum: 17 kW IKZ – pendinginan internal – 20 bar Kecepatan gerak cepat X, Y & Z: 30.000 mm/menit Akurasi posisi: ± 0,005 mm Akurasi pengulangan: ± 0,003 mm Penukar alat otomatis dengan pengambil ganda: 30 slot (opsional hingga 80 alat) Konveyor serpihan dengan rantai engsel Penutup penuh Hanya permintaan dari Jerman yang akan direspons / Hanya permintaan dari Jerman yang akan diproses

Kondisi: bekas, Tahun pembuatan: 2009, Offered here is a used machining center from the manufacturer Deckel Maho DMG. The machine is connected to power and can be inspected in our facility. Free loaded onto truck (FCA) Manufacturer: DMG Deckel Maho Type: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical specifications: Travel X-, Y-, Z-axis: 1250x1000x1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360x0.001° B-axis feed rate: 10,800 °/min Max. rotation speed of table: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800x800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500x3,000x3,200 mm Transport weight of machine (without magazine or additional equipment): approx. 20,000 kg Required space: approx. 7,000x6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction unit Pgodsw Ew T Sspfx Abuog Various new spare parts: 1x length measuring system Y-axis (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear pump unit ZAHNRADP-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x upgrade kit power module (new) 1x lifting equipment for the machine

Kondisi: baik (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: XD-38II-CP-0703-H, diameter putar di atas sled silang: 38 mm, kecepatan spindel (maks.): 6.500 rpm, diameter pembubutan: 38 mm, lubang spindel: 39 mm, daya: 7,5 kW (10,20 hp), The machine can be inspected at our location in Immendingen by prior arrangement. Included are the original chip conveyor and a bar feeder from FMB, model 3-36 turbo. Pgedpfx Ajvtmaljbuog Also included: Büchele high-pressure unit, type SFB-301, 150 bar, 4 valves.