Bangku lipat CNC

Darley EHP 200

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Working length: 4300 mm, pressing force: 2000 kN, connected load: 15 kW, weight: 18 t, including bending tools. Fedpei Dx Sbjfx Adgeft

Kondisi: baik (bekas), Tahun pembuatan: 1994, Toupieuse CNC pour spirales, capacité 50 cm³, diamètre minimum et maximum de la spire : 500 à 3 500 mm. Ffodpfoiu Acpjx Adgjt

Kondisi: baik (bekas), Tahun pembuatan: 1997, gaya penekanan: 200 t, Press brake DARLEY - EHP 200 / 3600 MACH-ID 9153 Manufacturer: DARLEY Fjdpfjwrx Nhsx Adgjft Model: EHP 200 / 3600 Control: DA 65 Delem Year of manufacture: 1997

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Technical specifications: Working length: 3,550 mm Frame width: 3,050 mm Press force: 230 t CNC control: CYBELEC ModEva 12S Controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Installation height: 745 mm (extra high) Table width: 140 mm Working height: 1,065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (L x W x H): approx. 4,650 x 2,350 x 3,100 mm Weight: approx. 25 tons Fjdpowntqxefx Adgjft Accessories: 2 pcs. CNC-controlled front bending aids 1 pc. CNC-controlled rear bending aid!!! The seller assumes no liability for errors in writing or data transmission. The machine’s condition regarding appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t Ffedpetunccefx Adgot From series production

Kondisi: bekas, Technical details: Maximum ram stroke: 250 mm Fodpfx Aow Au I Iodgeft Maximum workpiece diameter: 80 mm Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Various accessories *

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de Ffjdowl Uvkspfx Adgjt

Kondisi: bekas, various types available Fjdjdc A Sbepfx Adgjft

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section Ffedexddvnepfx Adgot A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: sangat baik (bekas), Tahun produksi: 1991 Model: ITPS III Nomor seri: ITPS 80C 25 P1C226 Gaya tekan maksimum: 1800 kN Langkah kerja: 115 mm Daya listrik: 415 V, 50 Hz, 3 fasa Arus nominal: 119 A Daya terpasang: 18,5 kW Berat mesin: 4940 kg Nomor inventaris: 9.14 Fedpowq Dpqjfx Adgsft Kontrol: Delem DA-65R Mesin dapat dinyalakan, namun kontrol tidak merespons perintah. Pengguna sebelumnya telah mengganti kontrol AMADA asli dengan DELEM.