Mesin pengukur koordinat

DEA Scirocco 101509

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Fpsdpfx Aswwlt Rem Sjh Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer Fpedpfxst Hw Nys Am Soh _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.200 mm, rentang pengukuran sumbu Y: 2.000 mm, rentang pengukuran sumbu Z: 1.000 mm, Measurement ranges X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty ISO 10360 E = [2.6 + 4L/1000]µm Fjdpfodv I Abox Am Sjph CNC control: Renishaw UCC S5 Handbox: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Software: Inspect3D Inca V6, new license (all languages) Original year of manufacture: 2014, modernized in 2017 and 2025 Trade-in against other CMMs possible

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Wir bieten hier einen hochwertigen 3D-Scanner von GOM an: GOM ATOS IIe Rev.01. Das Gerät ist komplett anschlussfertig und wird mit sämtlichen Kabeln geliefert. Auf dem PC ist leider ein Passwort gesetzt, jedoch liegt die Software auf CD bei. Zum Lieferumfang gehören verschiedene Sensorköpfe mit den folgenden Messvolumina: - Satz 175x140 - Satz 350x280 - Satz 550x - Satz 1000x800 Im Lieferumfang enthalten ist außerdem ein kompletter PC von GOM im Aluminiumkoffer mit vorinstallierter Linux-Software – ebenfalls anschlussfertig für den GOM ATOS IIe. Die Software ist auf CD enthalten. Ebenfalls dabei: Steel Scalebars und ATOS Auswertdongle. Zubehör: - Ersatzlampe - Kalibrierpanel (Aluminium), Typ CP20/MV, 350x280 mm² Fsdpfxjw E I Ito Am Soph

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 35.598 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07400004031, daya motor spindle: 20 W, kecepatan spindel (min.): 3.250 rpm, kecepatan spindel (maks.): 5.000 rpm, saluran batang: 90 mm, berat keseluruhan: 10.000 kg, Capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - Asse Y sulla torretta superiore - Contropunta - Controllo Siemens 840D power line - Macchina in condizioni perfette, sempre utilizzata con olio - Completamente attrezzata e in ottimo stato - Caricatore di barre LNS Sprint S2. Fjdpfx Amsuyx Hzj Soph

Kondisi: bekas, Tahun pembuatan: 1974, Maximum wheel diameter - 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustability 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 rpm Table size 400 mm Table bore 125 mm Mounting height between table and shaping head min./max. 190/290 mm Fixed outreach from shaping spindle 250 mm Axial travel of the table approx. 295 mm Number of teeth approx. 12 - 150 Feed range tooth depth 0.01 - 0.063 mm/stroke -"- Rotary feed at tool diameter 125 0.125 - 3.150 mm/stroke Spindle/Total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special features: " Hydrostatic linear guide with separate hydraulic unit, Fedjt Hww Depfx Am Ssph " built-in intermediate plate 100 mm to raise the shaping head, " hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and for workpiece internal clamping, various clamping chucks for different workpiece diameters " stepless stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master), " automatic stroke rate change and automatic feed change for ROUGHING and FINISHING in up to 3 cuts, " automatic and motorized shaping stroke locking in upper position after finishing operation, " separate control cabinet and control panel, " integrated coolant unit with chip conveyor and magnetic separator, " approx. 20 change gears, Condition : satisfactory to good, demonstration-ready shortly Delivery : ex stock – as inspected Payment : strictly net – payment upon receipt of invoice

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Fjdpfx Aodpak Rom Seph Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Optional: Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Kondisi: bekas, Palet dengan alur-T 18H7, cocok untuk DMG DMC 100 H dan DMG DMC 100 U serta DMC 125H/U Duoblock. Tersedia lebih dari 10 palet. Fpedpfx Ameqx Uh Nj Sjh

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Fsdpfxjifn N Ns Am Sjph Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: bekas, Mount: MK 4 Fpedob N Ezrspfx Am Seh