Pusat pemesinan vertikal

Deckel Maho DMF 220 Linear

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 50.745 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 15115223254, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 720 mm, produsen pengendali: Siemens, model controller: Siemens 840D, berat benda kerja (maks.): 2.200 kg, berat keseluruhan: 12.000 kg, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Deckel Maho DMF 220 Linear – 3-Axis Machining Centre – Used Bdodpfx Aljy Hqufoasb For sale is a used 3-axis machining centre of the type Deckel Maho DMF 220 Linear. 18,400 spindle hours 50,745 power-on hours The machine was in active use for series production until recently and was primarily used for machining steel and aluminium. Due to investments in new equipment, the machine will no longer be serviced and is therefore being sold in its current condition. Condition: The machine is generally operational but has spindle damage. Spindle repair is required. Equipment: - Partition wall for setup time optimization (parallel machining/setting up in one cabin half) - Conveyor belt filtration system for coolant processing - Tool changer - Spacious work area for complex components Sales conditions: - Price ex foundation - Transport and loading at buyer’s expense - Inspection by appointment Note: The machine was in productive operation up until it was decommissioned a few weeks ago. Price is negotiable.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Bdjdpfeuyk N Ijx Alajb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 17.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 720 mm, gerak cepat sumbu X: 100 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, produsen pengendali: HEIDENHAIN, model controller: I TNC 530, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 17.000 h, hidung spindel: BT 40, jumlah slot dalam magazin alat: 60, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan vertikal tipe kolom bergerak dengan 5 sumbu kontinu, dilengkapi meja putar (dapat dipasang secara horizontal maupun vertikal) dengan diameter 550 mm. Fasilitas pemesinan secara pendular (tipe pergantian palet) dengan sekat khusus. Dilengkapi presetting laser. Probing benda kerja nirkabel HEIDENHAIN TS 642. Konveyor chip jenis sabuk. Pendinginan melalui spindel dengan tekanan tinggi dan filter kertas. Pendingin jalur spindel. Handwheel remote HEIDENHAIN. Bsdpfsy Diabex Alasdb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 44.199 h, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 720 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 3, DECKEL MAHO DMF 220 Linear 3-sumbu ini diproduksi pada tahun 2004. Mesin ini memiliki lintasan gerak yang mengesankan sekitar 220 cm pada sumbu X, 56 cm pada sumbu Y, dan 72 cm pada sumbu Z. Mesin ini memiliki kecepatan putar maksimum sekitar 18.000 rpm serta dilengkapi dengan konveyor serpihan dan unit filter pendingin. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal DECKEL MAHO DMF 220 Linear yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Bdedpfjyw Rapjx Alajb • Daya listrik: 400V/50Hz • Pengolahan dengan pintu putar memungkinkan Perlengkapan tambahan • Konveyor serpihan BLECHTECHNIK DMF 220 (2003) • Sistem filter pendingin DMG

Kondisi: baik (bekas), Tahun pembuatan: 2007, Mesin bubut bekas OKUMA - Model: LT200-M TwinStar - Tahun: 2007 - Termasuk konveyor serpihan - Tangki pendingin - Siap tersedia segera Bdsdpsv S Svvjfx Alaob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology Bedpfx Aljyuzg Hoaodb 5-axis simultaneous operation available

Kondisi: bekas, 1x Mesin CNC Milling Bekas: Pabrikan: DMG - DECKEL MAHO Tipe: DMF 220 linear Tahun pembuatan: 2002 Jam operasional: Waktu nyala menurut counter: 42.378 jam Waktu spindle menurut counter: 11.472 jam Pusat pemesinan 3-sumbu Bsdpeyl R Ubjfx Alaedb Kontrol: Siemens NC-840D Jarakan sumbu: 2.200/560/720 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm Bdodpfx Aljylw Stjasb • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 5.012 h, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 15115221654, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 720 mm, kecepatan spindel (maks.): 6.300 rpm, jumlah slot dalam magazin alat: 100, sudut putar sumbu B (min.): -90 °, sudut putar sumbu B (maks.): 90 °, sudut putar poros C (maks.): 360 °, Note: Minor relay fault. TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 560 mm Travel range Z-axis: 720 mm Rapid traverse Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load capacity: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Bodpfxswd N D Te Alaodb Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine stations: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotational range (C-axis): 360° (hydraulically clamped) Swivel range, swivel spindle (B-axis): +90° to -90° Swivel spindle indexing (B-axis): 2.5° Accuracy Positional tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control Control manufacturer: SIEMENS Control model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h Operating time: 17,969 h Connected load: 60 kVA Overall length: 6,800 mm Overall width: 3,900 mm Overall height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Stepless spindle speed adjustment - Technical documentation and manual - Hydraulically clamped rotary axis - Swivel spindle with 2.5° indexing

Kondisi: bekas, Tahun pembuatan: 2002, en-GB: X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Control: 840 D Powerline ShopMill Siemens Main spindle: Spindle speed range: 20 - 12,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm Tool holder: SK 40 Internal coolant supply: 40 bar Work table: Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Number of T-slots: 6 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer: Number of tool stations: 30 pos. Max. tool length: 300 mm Max. tool weight: 6 kg Max. tool diameter: 80 / 125 mm Feeds: Feed speed: 20,000 mm/min Input increment: 0.01 mm Rapid traverse (X / Y / Z): 100 / 50 / 50 m/min Bedpjtqmr Rsfx Alajdb Measuring system: Resolution: 0.001 mm Total power requirement: 60 kVA Machine weight: approx. 12.5 t Space requirements: approx. 6.0 x 3.7 x 2.9 m CNC Vertical Machining Centre DECKEL MAHO - DMF 220 linear - From single-part production (aluminium, brass, and stainless steel) - Including work area partition - M26 function (switching to air blow through spindle centre) - New ballscrew for Z-axis including bearings (April 2015) - New milling spindle (2016) - Spindle hours: approx. 11,966 h - WITHOUT vices

Kondisi: bekas, Tahun pembuatan: 2002, Cutting diameter / mm Saw band length / mm Cutting width / mm KASTO tec AC5 Automatic Bandsaw Sawing power: 23 kW Machine weight: 5.9 t Bodpfxexrg E Is Alaedb Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530 mm Square: 530 x 530 mm Flat: 530 x 630 mm Smallest workpiece dimension: 10 x 10 mm Minimum cutting length: 6 mm Minimum remnant length single cut: 10 mm Minimum remnant length in automatic mode: 35 mm Automatic material feed, single max. (standard): 600 mm Automatic material feed, single max. (option): 1500/3000 mm Material feed, multiple: 9999 mm Machine roller track length: 1568 mm Max. workpiece weight: 2275 kg Cutting speed: 12–120 m/min (infinitely variable) Cutting feed: infinitely adjustable Material feed: ball screw spindle Automatic feed: with horizontal clamping vise Material clamping: hydraulic, infinitely adjustable Clamping force Main vise: 200–1000 daN Feed vise: 200–2000 daN Saw blade tension: hydraulic, factory set Saw blade cleaning: by easily replaceable double brush driven by a hydraulic motor. Coolant tank capacity: approx. 185 l Pump capacity: approx. 25 liters/min Upon request, we can offer the 4 saw bands currently available at extra cost.

Kondisi: bekas, Tahun pembuatan: 2003, EN-001 Bedpotumqvsfx Alajdb