Pusat pemesinan universal

Deckel Maho DMU 50 eVo linear

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 32.498 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, daya nominal (semu): 35 kVA, produsen pengendali: Heidenhain iTNC 530, lebar benda kerja (maks.): 500 mm, diameter benda kerja (maks.): 630 mm, berat benda kerja (maks.): 200 kg, tinggi total: 2.590 mm, panjang total: 4.780 mm, lebar total: 4.410 mm, berat keseluruhan: 5.900 kg, kecepatan spindel (min.): 18.000 rpm, daya motor spindle: 35.000 W, Year of manufacture: 2010 CNC control: Heidenhain iTNC 530 Kedpjyi Dnijfx Ac Hewu Axes Travel X-axis (mm): 500 Travel Y-axis (mm): 450 Travel Z-axis (mm): 400 C-axis indexing (°): 360º (0.001) B-axis indexing (°): 0º/108º (0.001) Rapid traverse (m/min): 80/50/50 NC milling/turning table: Pallet dimensions (mm): Ø390 Max. workpiece size (D x H, mm): Ø630 x 500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 18,000 Spindle drive power (kW): 35/25 (40% duty cycle/cont.) Spindle torque (Nm): 130/87 Cooling Coolant supply through spindle (bar): 40 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 30 With empty adjacent pockets (mm): 130 With filled adjacent pockets (mm): 80 Max. tool length (mm): 300 Chip-to-chip time (sec.): 5 Equipment Chip conveyor Infrared probe Rinse gun Air blast through spindle selectable via M function Signal lamp Laser tool measurement for tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine run time: Power-on hours: 54,257 Spindle hours: 32,498 Total power requirement (kVA): 48 Basic machine: dimensions/weight Length (mm): 4,780 Width (mm): 4,410 Height (mm): 2,590 Weight (kg): 5,900

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) Kedpfx Acsxmhdne Hjwu - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 42.768 h, produsen pengendali: HEIDENHAIN, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, en Kedpfjx Rd Hpox Ac Hswu

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), cnc-5-achs-fraesmaschine-deckel-maho-angebot Kodpfx Acjx Dm D Ue Hjwu

Kondisi: baik (bekas), Tahun pembuatan: 2009, 10556 Kwjdpfx Aoxc Tt Toc Heu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, konveyor serpihan, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 control, EXCELLENT condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Model: iTNC 530 >> Travels: X 500 / Y 450 / Z 400 mm >> C-axis: 360 degrees >> B-axis: 0 degrees to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C/B-axes steplessly programmable up to rapid traverse speed Kwodpfx Acjvyr Tdo Hsu >> Rapid traverse Y/Z axis: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction system >> ICS (internal coolant supply) 40 bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Prepared for robotic loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following maintenance work has been carried out: >> Main work spindle completely overhauled >> Full maintenance: All coolant hoses and pneumatic hoses replaced, new filters, all fluids and belts renewed. Wipers and more. Thorough cleaning performed. >> Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with TNC 530 3D path control from Heidenhain. The machine is in excellent condition. The main spindle has been overhauled (replacement spindle), fully serviced, and an inspection protocol is available. Take the opportunity to view and test the machine under power at our facility.

Kondisi: baik (bekas), Tahun pembuatan: 2006, TECHNICAL SPECIFICATIONS Main Drive Kwodpfeu Hkb Rex Ac Hju Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position Measuring System Resolution C, B, X, Y, Z: 0.001 mm Position tolerance C, B, X, Y, Z: 0.010 mm Working Range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Max. tool diameter without free spaces: 80 mm Max. tool diameter with free spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface, rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: approx. 6,800 kg Operating weight: approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including but not limited to: Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage monitoring system Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the above information.

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Sub Spindle: Kwjdpfx Aew Tg Adoc Hju Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Features/Accessories: Chip management: Chip conveyor Coolant management: High-pressure internal coolant pumps, 14 bar Barfeed: Short bar loader, EMCO LM 1200 Finished part removal: Workpiece picker (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, make Absolent Tool holders: Various static and driven holders Additional equipment: Spindle chiller unit

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 50.000 m/menit, pergeseran cepat sumbu Y: 50.000 m/menit, pergerakan cepat sumbu Z: 50.000 m/menit, lebar meja: 380 mm, panjang meja: 500 mm, beban meja: 200 kg, diameter pemasangan: 30 mm, de_to_hu_it_lt_001 Kwedpfxew Rl Igj Ac Hju

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control: HEIDENHAIN Control: MillPlus iT Clamping surface of the table: ø 500 x 380 mm B-axis: 0 - 161.955° C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Infinitely variable feed rates up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Kodpfswlvi Esx Ac Howu Rapid traverse B-axis: 40 rpm C-axis rapid traverse: 50 rpm Tool magazine positions: 30 Tool diameter with 2 free adjacent pockets: 130 mm Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Through-spindle coolant supply: 40 bar Total connected load: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Kondisi: sangat baik (bekas), Neuf 2006 Commande CNC Brother B00 Temps de changement de palette : 3,4 secondes Dimensions de la palette : 600 x 425 mm Kwodpsrfxr Ujfx Ac Hju Axe X : 550 mm Axe Y : 400 mm Axe Z : 415 mm Vitesse de broche : 12 000 tr/min Changeur automatique d’outils 40 positions Cône BT30

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 1.380 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 350 mm, kecepatan spindel (maks.): 18.000 rpm, jumlah slot dalam magazin alat: 30, sudut putar sumbu B (maks.): 108 °, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool stations: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS CNC control: Heidenhain iTNC 530 Machine weight: 6,500 kg Kjdpfxewu Evts Ac Hswu Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Automatic tool changer - NC rotary/swivel table - Through-spindle coolant (TSC): 40 bar preparation - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement