Mesin penggilingan alat

DECKEL FP 4 M

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 90 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, Perlengkapan: dokumentasi / manual, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, making it in top condition and technically, visually, and geometrically hardly distinguishable from a new machine. We look forward to your inquiry! Itsdpfx Aasx Irwdeher Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travel range X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table configuration: Rigid angle table or rotary-tilt-swivel table Further equipment and accessories: including 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request... Our Service Promise to You: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color for your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If desired, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation

Tahun pembuatan: 2024, Kondisi: baru, Working Chamber 1100 x 660 x 816 mm (W x D x H) Blasting Chamber Iedpfx Aeh Hxubeahstr Dust-proof negative pressure cabin in sturdy sheet steel construction Work Gloves Special rubber, wear-resistant, inner lining cotton, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closure, double-walled, foam-filled for noise reduction, lockable, with electric safety interlock Abrasive Recovery Via coordinated MHG recovery system Operation ON/OFF switches for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing Windows

Kondisi: bekas, Geldmacher MST / Deckel FP4M Milling Machine, Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions / measurements: Reference value: approx. 2,500 × 2,700 × 2,100 mm (length × depth × height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Itedsxcldkspfx Aahor Spindle taper / Tool holder: SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is adjustable on the ram. Spindle speed range: approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organise cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks stated are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the description of the article may occur and are subject to change.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual Used, sold as seen Itsdjlfc U Depfx Aahsr The machine is in accordance with the technical standard of its year of manufacture.

Kondisi: bekas, L + Z lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Isdpfx Aasrtd Uwshjtr Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 exchangeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centering point for collet holder - Emergency stop - Folding chuck guard - Splash guard - Machine light - Electrical diagram - Machine mounted on steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 1987, Mesin frais alat Deckel FP4M dengan display digital Heidenhain 3 sumbu, meja tetap, spindle SK 40. Aksesoris: berbagai collet dan arbor frais. Kondisi baik, siap pakai. Bisa diperagakan dalam keadaan menyala sesuai kesepakatan. Isdpfexmi I Ijx Aahstr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system Isdexctyaspfx Aahotr >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Schaublin 102N-VM-CF Hochpräzisions-Drehmaschine Schweizer Fabrikat Baujahr: 2005 Itjdpfx Aew N Rh Aoahor Max. zugelassener Umlaufdurchmesser über Bett: 200 mm Max. zugelassener Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Leistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querverfahrweg, X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsverfahrweg, Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung für Dreharbeiten Max. Werkzeugquerschnitt (Multifix-System): 10 x 10 mm Stangendurchlass (MULTIFIX-System): Durchmesser 20 mm Reitstock, in Höhe und Seite einstellbar: Innenkegel: MK2 Reitstockaufnahme-Ø: 30 mm Pinolenhub: 80 mm Kühlmitteltank: 23 l Elektr. Anschluss-Spannung: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3 Achsen (X-Z-Z1) X-Auflösung: 0,001 mm Z-Auflösung: 0,005 mm Z1-Auflösung: 0,005 mm - Kühlmitteleinrichtung - Rückseitiger Späneschutz aus Blech - Doppeltes Start/Stopp-Pedal und Spindelrichtungsumkehr - Schaublin W25 Spannzangensatz - Guss-Drehfutter W25 Ø110 mm mit Backen - Schnellwechselrevolver MULTIFIX-A mit Haltern - Antriebssystem für Zusatzgeräte mit Riemen Verstellbare und schwenkbare Riemenspannvorrichtung Antriebseinheit komplett mit Motor Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perjalanan sumbu X: 500 mm Itedpew I A D Tofx Aahjr Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 400 mm Kecepatan putar: 50 – 2500 rpm Daya penggerak: 2,7 / 4,4 kW Penjepit alat: SK 40 dengan penjepit hidrolik sesuai DIN 2080 Jenis meja: Meja tetap atau meja putar Luas permukaan meja: 650 x 380 mm Berat: 1600 kg Dimensi (dengan area keamanan): sekitar 2500 x 2700 x 1950 mm Warna cat: RAL 6011 hijau reseda Indikator digital: 3-sumbu HEIDENHAIN Perlengkapan: Pelumasan sentral, bak pendingin KSS, aksesori tambahan atas permintaan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, en-001 Itsdpfxovvtlgs Aahsr

Kondisi: bekas, Tahun pembuatan: 2017, Sheet width: 2070 mm Sheet thickness: 25 mm Pre-bend: 18 mm Top roll diameter: 320 mm Side roll diameter: 260 mm Bottom roll diameter: 320 mm Total power requirement: 26 kW Machine weight approx.: 8,100 kg Space requirement approx.: 4,700 x 2,000 x 2,200 mm Features: - Hydraulic side roll adjustment - Cone bending device - 2 driven rolls - Hardened rolls - Hydraulic drop end bearing Itedpfx Aaowc D Dxjher - Mobile control panel - Foot switch - Safety device - CE marking

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain Digital Display in special paint finish Light Grey, CE compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Rigid angle table (newly planed) >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head displaceable on spindle carrier: 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill travel: 90 mm extendable >> Clamping system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant equipment >> Chip tray Ijdow N Sfvopfx Aahstr >> Central lubrication About the Machine: Offered here is a universal milling machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is functional in all axes, and all bellows are as new. The rigid angle table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. Thanks to the Heidenhain digital readout, work is easier and even more precise. Take the opportunity to view and test the machine under power on-site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Itodpfxeu Tuk He Aahor

Kondisi: baru, en-GB Isdpfxjk Egrpe Aahetr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP4M with 3-axis Heidenhain digital readout in special light grey paint finish!!! Ijdpjvg Ewcsfx Aahetr Technical Specifications: >> Year of manufacture: 1987 Machine No.: 2203-2772 >> Fixed angle table >> Spindle speed: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm >> Vertical quill and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine in very good condition. The machine has minimal backlash, and all spindles move smoothly and evenly. Even at maximum spindle speeds, the milling machine runs quietly. Rapid traverse is available in all axes. A reliable and user-friendly machine. Oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.