Beli Mesin frais dengan tiang bergerak bekas (117)

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine Dkeloxcgtgjhccqpon - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Kondisi: baru, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, posisi kepala milling: Universal-Diagonal-Fräskopf, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, kecepatan pemakanan sumbu X: 20.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 20.000 m/menit, kecepatan spindel (maks.): 6.000 rpm, rentang pivot: 1 °, panjang meja: 9.000 mm, lebar meja: 2.000 mm, torsi: 1.288 Nm, pasokan pendingin: 36 batang, daya motor spindle: 40 W, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, LAGUN ML 8 Travelling Column Milling Machine The LAGUN ML 8 is a highly dynamic travelling column milling machine designed for precise machining of large and complex workpieces. Ideally suited for both single-part production and series manufacturing, the ML 8 meets the highest standards of accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing available ✔ Maximum flexibility thanks to the travelling column design ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust construction, high dynamics, and decades of experience in the manufacture of milling machines. These machines stand out for their reliability, ease of maintenance, and economical operation. Technical specifications: Control system: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 19" TFT display HEIDENHAIN motors, measurement systems and electronic handwheel HR-510 Tool changer: Automatic tool changer for 60 tools Chip disposal: Hinged belt conveyor Dolhcjh Ekucocqpokn Enclosure: Three-sided perimeter enclosure Accuracies: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Local technical support and service ✔ Fast spare part supply ✔ Training and operator instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and prepare a customised offer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 3.000 h, jarak pergerakan sumbu X: 6.100 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 950 mm, CNC-Fräsmaschine mit Fahrständer – Komplett modernisiert durch REM (2021) Dkslhcen D N H Tjcqpen Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten vollständig auf den neuesten Stand gebracht mit moderner Heidenhain TNC 320 Steuerung. Sofort einsatzbereit für die Produktion. HAUPTDATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsweg des Schlittens): 950 mm • Doppelfräskopf | Kopfdrehung: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spannungsfreigabe) • Kopfmaße: 290 × 290 mm • Spindelantriebsleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 IHRE VORTEILE BEI REM: ✔ Maschine vollständig geprüft und im Einsatz getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Attraktive Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie und Schwerindustrie. Fordern Sie jetzt die vollständigen technischen Daten, Fotos und ein Vorführvideo an.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 2.800 mm, posisi kepala milling: ASSE B 1°/ASSE C 3°, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan spindel (maks.): 4.000 rpm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Kontrol Numerik HEIDENHAIN iTNC530 Dkelozcfg Hohccqpon Kepala birotasi otomatis TBA4 1° + 3° dengan gigi HIRTH Pendingin oli untuk kepala spindle Daya motor spindle 30 kW Torsi maksimum spindle 780 Nm Penukar alat otomatis dengan 61 posisi Platform operator bergerak dengan penggerak vertikal hidrolik Kontrol adaptif yang dapat diprogram Kontrol umur pakai alat Evakuator serpihan jenis rantai Pendinginan alat dengan distribusi di sekitar spindle Meja kerja dengan 2 meja STOLLE, total 12000 x 2500 mm 4 sudut penjepit per meja kerja, ukuran 2500x1000x1200 mm Sertifikasi CE dan manual Kepala TBA4 sepenuhnya direkondisi oleh EMCO MECOF

Kondisi: bekas, Sumbu X (longitudinal) 800 mm Sumbu Y (transversal) 400 mm Sumbu Z (vertikal) 300 mm Panjang meja 1340 mm Lebar meja 300 mm Kecepatan maksimum spindle 2500 rpm Daya motor spindle 3 kW Dimensi (P x L x T) 1800,0 × 2000,0 × 2080,0 mm Dkelhew Tyyioccqpen Berat 2050 kg

Kondisi: bekas, Tahun pembuatan: 2016, x-travel 4,500 mm y-travel 1,300 mm z-travel 1,800 (2,300) mm Control iTNC 530 HSCI Heidenhain Tool holder ISO 50 DIN 69871 AD Spindle speeds 20 – 6,000 rpm Spindle motor 43 kW Torque 900 Nm Table clamping area 6,000 x 1,100 mm T-slots 6x 22 H12 mm T-slots REF: 1x 22 H7 mm T-slot spacing 140 mm Number of tool positions 40 stations Tool holder ISO 50 DIN 69871 Max. tool diameter 125 mm Max. tool diameter with free adjacent space 250 mm Max. tool length 400 mm Max. tool weight 20 kg Tool change time 10 sec Rapid traverse (X / Y / Z) 35,000 mm/min Feed force (X / Y / Z) 16,000 N Acceleration X: 1 | Y: 1.5 | Z: 2 m/s² Total power requirement 57 kW CNC Fixed Bed Milling and Drilling Center SORALUCE – SLP 6000 Dkolhccoy Umagsqpon - Automatic indexing milling head with 0.001° x 0.001° division in two planes - Tool clamping force: 20,000 N - Prepared for "Dynamics Active Stabilizer" - Dynamic Collision Monitoring Software (DCM) - Interpolative turning - INA Linear roller guide system RUE55-E-L (X/Y/Z axes) - Hydromechanical damping slides (Y/Z axes) - Rack and pinion drive (X axis) - Ball screw drives (Y/Z axes) - Heidenhain AC servo motors with digital drive technology - Ventilated direct linear measuring system Heidenhain - 3D thermal expansion compensation for all milling head positions - Automatic feed control - Increased accuracy through Soraluce 3D milling head compensation - Pre-installed for NC rotary table for 5-sided machining - Tool changer enables loading and unloading during automatic operation - Adaptive Control - Accura Heads option - DXF converter - Interpolative turning Heidenhain - Splash guard enclosure (2x front doors, 2,500mm)

Kondisi: bekas, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 4.000 rpm, daya motor spindle: 37 W, PERGERAKAN SUMBU X 16000 MM PERGERAKAN SUMBU Z 1500 MM PERGERAKAN SUMBU Y 3500 MM DAYA MOTOR SPINDEL 37 kW KONEKSI HIDUNG SPINDEL ISO 50 KECEPATAN SPINDEL 4000 RPM CNC HEIDENHAIN iTNC 430 MAGAZIN ALAT 80 POSISI KEPALA OTOMATIS 2,5° X 2,5° PENDINGIN INTERNAL DAN EKSTERNAL SONDA PENDETEKSI BENDA KERJA HEXAGON MEJA PUTAR 2000 X 2000 MM KAPASITAS 15 TON PERGERAKAN SUMBU V 1500 MM KABIN OPERATOR DENGAN OPERATOR MEJA ANCHORING Dolhex A Ulweccqpokn PENGELUAR SERPIHAN

Kondisi: bekas, X AXIS TRAVEL 4500 MM Y AXIS TRAVEL 1700 MM Z AXIS TRAVEL 1000 MM ISO 50 Dkjlhccot Hr Ikeqpsn SPINDLE SPEED 3000 RPM MACHINE WEIGHT 28 TON CNC NUM 750 TOOL CHANGER WITH 61 POSITIONS AUTOMATIC HEAD A AXIS 1°, B AXIS 3°

Kondisi: bekas, Tahun pembuatan: 2003, EN-001 Delhotumqvjccqpekn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, X-axis travel: 6,000 mm Y-axis travel: 2,100 mm Z-axis travel: 1,500 mm Control system: HEIDENHAIN iTNC 530 Feed rate: 2–20 m/min Spindle speeds: 20–4,000 rpm Table dimensions (longitudinal): 7,000 mm Table dimensions (cross): 2,000 mm Total power requirement: 79 kW Machine weight approx.: 55 t Space requirements approx.: 15 x 7 x 4.6 m The SORALUCE FP6000 is in very good condition. Optional accessories: # Clamping angle plate: €5,000 # Clamping cube: €2,000 Delhccovwgl Asqpokn # Various tools & workbench: €2,000 Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal Milling Head: • Tool holder: ISO 50, DIN69871 AD • Automatic tool clamping: Clamping force 20,000 N • Indexing accuracy / repeatability: ± 3 sec. = ± 0.002 mm • Pull stud: DIN 69872 Form A • Number of swivel positions: 1 x 1° milling head (360 positions rear plane, 270 positions front plane) • Spindle bearing diameter: 90 mm • Sealing air: 0.7 bar Main drive: • Drive type: three-phase motor • Drive power: 32 kW at 100% duty cycle (S1) Spindle: • Spindle speed: 20–4,000 rpm • Full power available from: 340 rpm • Torque at 32 kW/S1: 910 Nm • Speed control: 2 infinitely variable ranges via star/delta switch Rapid traverse: max. 35,000 mm/min

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 8.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 2.500 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan rotasi (maks.): 3.000 rpm, jenis arus masuk: tiga fasa, pasokan pendingin: 15 batang, daya motor spindle: 33.000 W, produsen pengendali: HEIDENHAIN, model controller: 430 CA, daya: 0,033 kW (0,04 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, ANAYAK HVM 9000 – CNC Travelling Column Milling Machine | 8300 mm X-Axis Travel | Refurbished Large CNC milling machine, workshop-refurbished, ideal for large workpieces, heavy-duty machining, and guaranteed precision. Equipped with HEIDENHAIN control and numerous technical upgrades. 🛠 Main technical specifications: • X-axis travel: 8,300 mm • Y-axis travel: 2,000 mm • Z-axis travel: 2,500 mm • Spindle head: 33 kW – 3,000 rpm • Spindle mount: ISO 50 DIN 69871-B • Automatic tool changer: 30 tools • Additional axes: Automatic B and C axes • CNC control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Complete retrofit performed: • Grinding and adjustment of Y-axis and column slideways • Replacement of spindle head bearings, pinion, and gears • Overhaul of electrical cabinet and motor wiring • New bellows, cable carriers, and drive system • Machine tested, documented, and ready for operation. ✅ Ideal applications: • Machining of large structures • Heavy-duty and power generation industries • Railway, wind energy, shipbuilding, or large mould manufacturing 📌 Available for immediate delivery. Dslhccoqpd D Isqpekn Power, reach, and precision in a single machine.

Kondisi: bekas, Tahun pembuatan: 2010, Translation into English: x-axis travel: 2,600 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: iTNC 530 Heidenhain Main spindle speed range: 20 - 18,000 rpm Main spindle drive power: 35 / 25 kW Tool holder: SK 40 Clamping table surface: 2,900 x 700 mm Max. table load: 2,150 kg Number of tool positions: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent slot: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Rapid traverse (X/Y/Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 54 kVA Machine weight: approx. 14.4 t Djlhcov Dxxnocqpokn Space requirement: approx. 8.0 x 5.6 x 2.8 m CNC travelling column milling machine DECKEL MAHO - DMF 260 New Design - NC rotary table (A-axis) - Operating hours: 18,709h spindle running time - Overhauled spindle installed (Dec 2023) - Z-axis weight counterbalance replaced (Feb 2023) - Production package - Option: Tool clamping for pull studs - WITHOUT vices!

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Programmable 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data: X-axis travel (longitudinal): 10,000 mm Dkolhswrzkzoccqpon Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.

Kondisi: baru, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.000 mm, posisi kepala milling: Universal-Diagonal-Fräskopf, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, kecepatan spindel (maks.): 6.000 rpm, rentang pivot: 1 °, panjang meja: 7.500 mm, lebar meja: 1.100 mm, torsi: 1.178 Nm, beban meja: 42.000 kg, pasokan pendingin: 36 batang, daya motor spindle: 53 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, LAGUN CM 6 Moving Column Milling Machine – Available at Short Notice The LAGUN CM 6 is a high-dynamic moving column milling machine designed for the precise machining of large and complex workpieces. Ideal for both single-part production and series manufacturing where maximum requirements for accuracy, stability, and flexibility are demanded. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Lease-purchase / financing available Dkolhcsvrv Suecqpsn ✔ Maximum flexibility thanks to moving column design ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (part of MAHER HOLDING), known for robust construction, high dynamics, and decades of experience in building milling machines. These machines impress with their reliability, maintenance-friendly design, and cost-effective operation. Technical specifications: Control system: Two HEIDENHAIN TNC 7 CNC controls – one at the front of the machine and one in the rear cabin 2 x HEIDENHAIN 19" TFT monitors HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: Automatic tool changer (ATC), 60 positions Chip disposal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast availability of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide a tailored offer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 5.000 mm, jarak lintasan sumbu Y: 3.100 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan spindel (maks.): 3.500 rpm, Parameter mesin - lihat foto Sumbu X - 5000 mm Sumbu Y - 3.100 mm Sumbu Z - 1.600 mm Sistem kontrol Siemens 840 D Dkelhccqjy U Ngvspjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Heidenhain TNC 430 PA CNC Maximum spindle torque: 900 Nm Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table: 1,000 × 14,000 mm Number of T-slots on table: 7 T-slot width × pitch: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Djljxdwkfshccqpskn Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between horizontal spindle axis and table surface: 275 mm Maximum distance between horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between vertical spindle face and table: 50 mm Maximum distance between vertical spindle face and table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in spindle: 16,500 N Main machine dimensions Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space: 73 m² Total machine weight: approx. 34,000 kg Weight of electrical cabinets: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be installed by the customer outside the machine for 400 V Weight of the hydraulic unit without oil: 150 kg

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.100 mm, Fixed table 3100x1000 mm 1 X-axis rack and pinion transmission (dual drive), Y and Z axes with ball screws Pressurized optical scales X, Y, Z axis traversal speed up to 35 m/min X, Y, Z axis thrust max. 10,000 N X-axis with non-walkable telescopic covers Hydraulic system, power supply and wiring Direct hydraulic balancing system (double cylinder) Chiller unit 6000 W Hydropneumatic and Electric cabinets (Rittal), floor-mounted Work area lighting; Machine and spindle hour counter External operator station – mobile operator panel External low-pressure cooling system, not integrated in spindle C axis with torque motor Universal C-head with continuous positioning via torque motors Electrospindle 33(25) kW – 640(480) Nm – 8000 rpm – ISO 50 Heidenhain iTNC 530 HSCI CNC, complete with operator panel and 15" monitor mounted at front side of the machine Portable control unit with HR 510 handwheel Ethernet network connection Voltage 400 VAC Frequency 50 Hz 24-position ISO50 disc-type tool magazine with tool changer arm, including support and management software, positioned at end of X-axis stroke – qty 1 2 longitudinal auger chip conveyors + 1 crosswise belt conveyor Delhccsy Uvrfjqpskn Safety enclosures including sheet metal panels and sliding door with Lexan window, CE compliant safety standards. Upper cover included Partition wall and software setup for pendulum machining operations Medium-pressure (15 bar) coolant internally through spindle with bag filter Air blow through nozzle external to spindle Spray mist external tool cooling system Renishaw RMP60 digital probe Fixed BLUM laser preset station, including Blum measuring cycles and reference sphere Machine supplied with CE declaration of conformity and manuals. All stated technical data are for reference only and may be subject to change without prior notice and are therefore not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F 36905, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 2.000 rpm, model controller: HEIDENHAIN TNC 360, en1 Djlhccsy Rrbhsqpskn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Dkolhjyr Dmdjccqpsn Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, posisi kepala milling: 2.5 x 2.5 °, diameter pemasangan: 50 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar total: 50.000 mm, tinggi total: 48.750 mm, panjang total: 212.400 mm, panjang meja: 12.000 mm, lebar meja: 1.650 mm, daya: 0,03 kW (0,04 hp), berat keseluruhan: 50.000 kg, Achsenweg X: 10.300 mm Achsenweg Y: 2.000 mm Achsenweg Z: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 1.650 mm Tischbelastung: 50.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: ISO 50/BT/MK Delhcjrx Rtrjcqpjkn Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf automatisch schwenkbar: 2,5 x 2,5° Betriebsstunden: 25.000 h Maschinenlänge: 21.240 mm Maschinenbreite: 5.000 mm Maschinenhöhe: 4.875 mm Maschinengewicht: 50.000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.400 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan gandar Y: 30.000 m/menit, laju pemakanan sumbu Z: 30.000 m/menit, kecepatan spindel (maks.): 2.000 rpm, panjang meja: 4.000 mm, lebar meja: 2.000 mm, CNC bed-type milling machine SACHMANN RAMBAUDI - MP-212 HS Delhex Nh H Dsccqpokn KOSMO 3 swiveling head SK-50, 0.02 degree, 1195 Nm Spindle extension L = 600 mm with 2000 rpm 3D touch probe MP60 ATC chain with 80 positions Coolant system 1,320 l with 4.8 bar Rotary table 2000 x 1600 x 15 t V-axis (infeed) 1500 mm Table rotation speed 3 rpm Heidenhain RON 700 rotary encoder for table rotation Ram size 500 x 500 mm with 56 kW Chip conveyor X-axis: 6000 mm Y-axis: 2000 mm Z-axis: 1400 mm Table length: 4000 mm Table width: 2000 mm Table load capacity: 25,000 kg Spindle power: 37 kW Spindle speed: 2000 rpm Tool holder: 50 ISO/BT/MK Feed X-axis: 30,000 mm/min Feed Y-axis: 30,000 mm/min Feed Z-axis: 30,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 15,000 mm Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information provided on this page has been collected to the best of our knowledge and, where possible, from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Therefore, these do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.100 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, panjang meja: 8.000 mm, lebar meja: 2.500 mm, beban meja: 15.000 kg, Chain-type tool changer with 80 positions Rotary table 1500 x 1500 mm with V-axis 1500 mm Table load capacity: 15,000 kg Optional box table: 3500 x 1000 x 1000 mm Electrically powered X-axis travel: 8000 mm Y-axis travel: 3100 mm Z-axis travel: 1600 mm Table length: 8000 mm Table width: 2500 mm Table load capacity: 15,000 kg Spindle power: 43 kW Spindle speed: 4000 RPM Tool holder: 50 ISO/BT/MK Feed rate X-axis: 25,000 mm/min Feed rate Y-axis: 25,000 mm/min Feed rate Z-axis: 25,000 mm/min CNC control: iTNC530 Milling head auto-indexing: 2.5 x 2.5° Dolhsxm Sudeccqpekn Length: 14,000 mm Width: 6,000 mm Height: 6,000 mm Weight: 68,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, sourced from the manufacturer. The details are given in good faith but accuracy cannot be guaranteed. Therefore, they do not constitute representation or contractual terms. We recommend verifying all critical information.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Delhorx Rxtoccqpokn Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.300 mm, jarak gerak sumbu Z: 1.500 mm, translation-1 Dslhccsxc Emxjqpekn

Kondisi: baik (bekas), Tahun pembuatan: 2001, jarak pergerakan sumbu X: 3.200 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.460 mm, panjang meja: 3.800 mm, lebar meja: 1.000 mm, beban meja: 30.000 kg, Chip conveyor Double doors at the front Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant unit (IKZ) 16 bar and 2.2 kW, delivery rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first-owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Maximum table load: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: 50 ISO/Bt/Mk X-axis feed rate: 10,000 mm/min Y-axis feed rate: 10,000 mm/min Z-axis feed rate: 10,000 mm/min Milling head auto-index: 2.5 x 2.5° Dkjlhexc Hh Deccqpen Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, these details do not constitute a representation or contractual terms. We recommend that you verify all important details yourself.