Sebagus derek gantry girder tunggal yang baru

DEMAG/TEICHMANN

Kondisi: bekas, Tahun pembuatan: 2008, Used drilling center by CMA Type: TRD 40 CN 9000 Table length: 9000 mm Max. capacity: 40 mm Automatic tool changer Gtodpfowc Ndwsx Abheu Year of manufacture: 2008

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Meja pemotongan kaca laminasi Bavelloni LAMY 370 S + meja kaca float REV 372 SR Gtodsxfamlspfx Abhsu maks. panjang pemotongan: 3700 mm ketebalan minimum: 3 + 3 mm + PVB ketebalan maksimum: 8 + 8 mm + PVB dimensi mesin: 5740 x 3600 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 50 h, nomor mesin/kendaraan: 3018-04, Manufacturing origin: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. travel: SpW+50 mm Minimum automatic travel: 1.5 mm Speed: 50-5500 mm/min Reversal dwell: 0-6 sec. Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for the table and workhead CROSS SLIDE Maximum travel: 300 mm Rapid traverse: 60 mm Infeed depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Incremental feed: 0.001-0.05 mm WHEELHEAD Left wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670/2,110 rpm Internal grinding spindle unit with belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Infinitely variable spindle speed: 30-1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Max. permissible load for chuck work: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill travel: 35 mm Precision adjustment for cylindrical correction: ±40 µm Gjdpfx Aew T Sd Tebhstu TECHNICAL PERFORMANCE: GUARANTEED WORKING ACCURACY Straightness of generatrix over 630 mm: 0.003 mm Roundness in chuck work: 0.0003 mm CONNECTION VALUES Max. power consumption: 13 kVA Permissible voltage fluctuation: -15% / +10% Permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar All technical data provided without guarantee; subject to errors or omissions.

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, kecepatan rotasi (maks.): 6.000 rpm, kapasitas tangki: 1.200 l, EN: SHW Powerspeed 5 Travel distances • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head rotation range tool holder: 360 x 1 degree • Milling head swivel range: 180 x 1 degree Godpjv Dhw Tefx Abhstu • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters Please note: The images are sample images for comparison purposes only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC mills - large part machining - CNC large part machining - milling - shw - PS5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 POWER 2.4/15.5 kW (50 Hz) MAXIMUM CAPACITY 16 TON Godpfx Ast Nhqysbhotu

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), 2 Katzengreifer EK DMR Gtsdotu Nmdspfx Abheu

Kondisi: bekas, Tahun pembuatan: 1999, Payload: 19,990 kg Gross vehicle weight: 8,010 kg Godpfetr H Enox Abhjtu Tyre condition front: 70% Tyre condition rear: 70% Front tyres: 245/70 R 17.5 Rear tyres: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Gedel Dw D Ejpfx Abhetu Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Kondisi: baru, Cutting range: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow pivotable up to 45° - Two band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material and solid materials made of stainless steel, iron, etc. Godpfx Absilk H Tohetu - Generously sized saw arm for low-vibration operation - Saw arm lowering by hydraulic cylinder - Low noise due to robust construction - Automatic shut-off after cutting cycle via micro switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC certified, German documentation and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after cutting cycle - Base frame

Kondisi: bekas, Tahun pembuatan: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery / l Weight: 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in workshops, craft businesses, or industrial applications – this compressor provides reliable compressed air supply. Gtjdpfx Abjh A Sfdoheu Drive power: 3 kW Operating pressure: 7 bar Air flow: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air demand Scope of delivery: 1x Compressor – Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer – OMI ESD 108 – 0.70 kW 1x Beko Öwamat 2 – oil-water separator Technical data taken from publicly available sources.