Troli rel ganda DEMAG DH520 H20

DEMAG DH520 H20 4/1 F10

Kondisi: baru, Setara dengan Behringer, Kaltenbach, Kasto, Jaespa, dll. Sistem pemotong sudut berpaten Kecepatan pemotongan dapat diatur tanpa langkah Kontrol umpan hidrolik Gtodpeh S Nxpsfx Adgot Pengangkatan dan penurunan rangka gergaji secara hidrolik Penjepitan material secara hidrolik Penggerak pita gergaji bertenaga tinggi dengan kontrol frekuensi Rentang putar 30° kanan / 45° kiri Rentang pemotongan dalam mm 45° kiri bulat 300, datar 300 x 300 90° bulat 410, datar 620 x 410 45° kanan bulat 360, datar 420 x 360 30° kanan bulat 300, datar 300 x 300 Sisa panjang potongan tanpa penjepitan bundel 60mm Opsi yang direkomendasikan: Perangkat penyemprotan mikro Lampu laser Regulator tekanan penjepit Sikat serpihan penggerak Rol pengangkat manual Elemen pemasangan

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) Gtjdpfofgyicjx Adgot · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Gtjdpfx Ajfg E Hpodget The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Gsdju Nc Emjpfx Adgstt Work area lighting

Kondisi: baik (bekas), Spectro CIROS CCD water analysis device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid any ambiguities. For general inquiries or to arrange a viewing appointment, I am available at the phone number listed below at any time. Subject to prior sale and errors in description. Gtsdpfxofiqn Uj Adgjt VAT will be shown separately on my invoices. Shipping via freight forwarding company.

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBUT136, ! Bargain Price ! Price starting from €1,150 R.Stahl Gedpoigl R Rsfx Adgjtt Single-Girder Suspension Crane / Overhead Crane / Crane Runway / Workshop Crane / Gantry Crane Load capacity: 250 kg 7 cranes available: 4: Steel suspension crane, load capacity 250 kg, width 6.35 m, span 5.6 m 5: Steel suspension crane, load capacity 250 kg, width 2.65 m, span 1.9 m 6: Steel suspension crane, load capacity 250 kg, width 4.85 m, span 4.35 m 7: Steel suspension crane, load capacity 250 kg, width 2.90 m, span 2.35 m 9: Steel suspension crane, load capacity 250 kg, width 6.0 m, span 5.5 m 10: Steel suspension crane, load capacity 250 kg, width 1.03 m, span 0.74 m (1,150 €) 11: Steel suspension crane, load capacity 250 kg, width 1.65 m, span 1.25 m Track gauge can be modified, end carriages are bolted with 8 bolts. Runways (IPE 200 – not available) Trolleys are adjustable to fit girder size. Including complete control unit, pendant control station. All cranes are electrically operated on all 3 axes. Lifting height / hook travel: approx. 4 m Connection: 400V 16A, year of manufacture: 2003 Very good condition, units were only used for maintenance – barely used. Shipping by freight carrier, collection preferred. Location: 75053 Gondelsheim, Germany Shipping cost by postal code upon request – we will provide you with a prompt, non-binding offer!

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Godofg Rlcopfx Adgott Space requirement approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for series cutting from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle. CNC automatic machine with multiprocessor control and two axes controlled by the latest generation MEP control system, enabling the programming of up to 1000 different cutting programs, each with different cutting lengths and quantities, for the same material thickness.

Kondisi: bekas, Tahun pembuatan: 2001, Panjang pembubutan 470 mm Diameter pembubutan maks. 390 mm Putaran spindle 3500 rpm Gerakan X/Z – 235/520 mm Gjdpfxexdfi Ne Adgjtt Jumlah stasiun di revolver 12 pcs Kontrol: MSG 500 Perlengkapan: Berbagai dudukan alat

Kondisi: bekas, en-001 Gedpfxowc A Sne Adgott

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Gtedpfx Ajd Iipmjdgjt Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens