Thermo minyak suhu kontrol unit

Regoplas RT50

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Psdpofg Rlcsfx Anwjpt Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirement approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for series cutting from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle. CNC automatic machine with multiprocessor control and two axes controlled by the latest generation MEP control system, enabling the programming of up to 1000 different cutting programs, each with different cutting lengths and quantities, for the same material thickness.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW Ppodpfolnkc Uox Anwot - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line Ppjdeilqvrjpfx Anwst For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Tahun pembuatan: 2023, Kondisi: baru, Chillers with various refrigerants and low GWP values available ex works. Ppjdpjhtfggjfx Anwet We are happy to advise you on the different refrigerants, areas of application, and installation requirements.

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) Pedpfx Ansg Ezarswjpt OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction Ppodpfx Ajftm Hrjnwjt • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: baru, Tahun pembuatan: 2024,

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: kabin, Paint/Spray Booth !! Always a brand new machine (Customer installation photos shown). We are the manufacturer. !! The Reinox 450×235 paint booth represents the ideal solution for painting large components and serial production. Its robust construction, high-performance extraction, and ATEX certification ensure safe operation even in environments with explosion risk. Ppedeia Taxepfx Anwet The booth is equipped with a powerful fan with a frequency inverter, allowing smooth adjustment of extraction power according to current needs. A three-stage filtration system keeps the workspace clean and ensures high-quality surface finishing. Technical specifications: - Fan certified for ATEX Zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Regulation: frequency inverter – stepless power adjustment via potentiometer on the control panel - Filtration: three-stage (dry or wet variant upon request) - Certification: CE, ATEX Warranty: 12 months Machines can be ordered in various custom configurations and sizes! Do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Ppjdpsu I R Utefx Anwot Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material thickness: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers, suitable for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives for various types of materials such as MDF, multiplex, particle board, composites, and gypsum plasterboard. This type of gluing machine enables precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be appropriate for the type of production. The heavy-duty frame and core of the rollers, manufactured with greater wall thickness compared to earlier models, allow for high production throughput without any particular problems and enable bonding of materials up to 2,200 mm in width. Roller removal for maintenance is a simple process, as the supports can be separated into two halves using a simple bayonet coupling. The gluing machine can also be equipped with various optional features such as an electronic speed controller, automatic roller washing system, and automatic upper roller lift with position indicator on the display. The S4R/P glue machine is used for a variety of manufacturing applications, including in the construction sector and for the production of foam panels and mattresses. Equipment: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm. Disc rollers D: 122 mm, stainless steel Location: ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), de Ppodpsfw Nc Usfx Anwot