Mesin cetak injeksi

DEMAG ERGOTECH 200 - 840

Kondisi: baik (bekas), Tahun pembuatan: 2005, maschinentext001 Klodpfx Aheyz Tmyshjt

Kondisi: baik (bekas), Tahun pembuatan: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mould height: 330 x 830 mm Opening stroke: 675 mm Maximum diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner zones: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm Kljdorgw Exjpfx Ahhot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Perlengkapan: dokumentasi / manual, 1 Kledpfx Ahox Elqrshet

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Flange diameter: 160 mm, clamping force: 1,600 kN, tie bar spacing: 520 mm x 520 mm, min. mold diameter: 350 mm, min. mold installation height: 300 mm, opening stroke: 650 mm, daylight between platens: 950 mm, ejector stroke: 150 mm. Screw diameter: 45 mm, injection pressure: 2,336 bar, shot volume: 318 cm³, nozzle radius: 15 mm, injection volume: 134 cm³, injection weight: 289 g. Machine dimensions (L/W/H): approx. 4,900 mm x 1,600 mm x 2,200 mm, weight: approx. 7,400 kg, operating hours: approx. 71,187 h. The machine has an unknown defect. Documentation available. On-site inspection possible. Ksdpfx Aeuabq Tohhelt

Kondisi: bekas, Tahun pembuatan: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Tie bar distance: 710 x 630 mm Screw diameter: 50 mm Kljdpfx Ahjva Ht Sehet Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive: Hydraulic

Kondisi: bekas, Tahun pembuatan: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Movable platen stroke force: - opening: 105 kN - closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clear width (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heater capacity: 30 kW Cylinder heating control zones: 6 Dry cycling rate: 1,550 1/h Kledpfxexu Uvae Ahhst Oil filling: 720 l Dimensions and Weight: Net weight incl. control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Shot capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw shaft power standard or Stage 1: 95 PS Screw shaft power option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 47.137 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61020607, gaya penjepit: 1.300 kN, jarak antara tiang: 470 mm, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current update – Tax notice and benefit for used machinery: As of July 1, 2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth booster (Section 7 (2) EStG-E) Manufacturer: Krauss Maffei Type: KM 130 750-130 CXV BluePower, 2-color, 2-component machine Control: MC6 Year: 2014 Machine No.: 61020507 Operating hours: 47,137 h Complete service record for the past 7 years / 25,000 h of operation 1st injection unit 750 horizontal Injection unit/screw: 50 mm Shot volume: 393 cm³ Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd injection unit 180 vertical Injection unit/screw: 30 mm Shot volume: 85 cm³ Shot weight: 77 g Injection pressure: 2500 bar Clamping unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Platen size: 745 x 770 mm Max. platen spacing: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – Full machine data sheet attached as PDF Nozzle side: needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Water circuit BGS: 6 zones each on nozzle and ejector side BluePower technology – up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripherals shown are NOT included in the offer! The machine is available immediately. Kljdpsyf Uy Ujfx Ahhot Free loaded onto buyer’s truck, or free delivery to location against reimbursement of freight costs. Information about the company and our machines: - We only sell machines purchased from running production, stored at our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property. - All offered machines come from successful companies where maintenance and care are standard practice - All available machines can be viewed in our warehouse.

Kondisi: baik (bekas), Tahun pembuatan: 2004, gaya penjepit: 800 kN, diameter sekrup: 35 mm, For sale is an injection moulding machine from Krauss-Maffei, model 80-220C2. The machine comes from a well-maintained, clean operation that places great importance on regular maintenance and is fully operational immediately after installation. Year of manufacture: 2004 Machine number: 61004709 Clamping force: 80 tons Equipment: Kjdpfx Aewqmvgshhelt - D35 cylinder - 1 hydraulic core puller - Pneumatic needle shut-off - Tie bar extraction device on the operator's opposite side Transport and loading can be organised Europe-wide upon request and for an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you! Trade-in or exchange is possible! Machinery buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for high-quality but affordable metalworking machinery for your production needs, or are you looking to sell your equipment? For further information or to get in touch, please visit our website.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 27.000 h, gaya penjepit: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale The machine is in very good condition, having only been operated in single-shift production for small batch and sample runs. A new hydraulic pump was installed recently (approx. 300 operating hours). Kodpsyn Sc Eofx Ahhelt - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and linear guides show no damage, like new - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Powered inspection possible. Further accessories such as Motan dryer, chiller unit and more available upon request. The machine can be dismantled and loaded by us by arrangement. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 60.159 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, This Krauss Maffei 500-4300 CX 3s injection moulding machine was manufactured in 2010. With a clamping force of 5000 kN and a maximum shot weight of 2084 g, it is suitable for high-quality injection moulding applications. Featuring a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine delivers robust performance. Take advantage of this opportunity to purchase the Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Please contact us for further details. • Locking device • Mould weight: Moving side 3950 kg / Fixed side 5260 kg (total 7900 kg) • Min. mould diameter: 560 mm • Opening stroke: 1170 mm • Mould installation height: min 480 mm; max - • Max. platen distance: 1650 mm • Mounting platens (H × V): 1270 × 1200 mm • Tie-bar clearances: H 900 mm / V 800 mm • Centring ring diameter: 200 mm • Ejector: • Stroke: 250 mm • Ejector force: 95.4 kN Kodpfx Ahoyg Hz Hoholt • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / Controls • Core pull controls: 2 (moving platen) + 2 (fixed platen) • Shut-off nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12x USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. shot volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticising rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle orifice: 6 mm • Pump output / heating output: 90 kW / 44 kW • Other • Max. crane load: 10 tonnes • 2K capability: no • Filter nozzle/granulator: no • This is a standard fully hydraulic two-platen clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment: • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z available