Ergotech 200-50 Kompak

DEMAG

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Seven Arburg injection moulding machines are available: 1) Arburg 320C 600-250 Year of manufacture: 2001 Operating hours: 83,365 h Clamping force: 600 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 4,000 mm / 2,300 mm Including Multilift handling unit. 2) Arburg 420C 1000-250 Year of manufacture: 2001 Operating hours: 90,769 h Clamping force: 1,000 kN Screw diameter: 30 mm Shot weight: 97 g Max. injection pressure: 2,470 bar Injection volume: 106 cm³ Centricity: 125 mm / 125 mm Max. opening stroke: 750 mm Platen gap: 750 mm Platen dimensions X/Y: 570 mm / 570 mm Tie bar spacing: 420 mm / 420 mm Core pulls: 2 Machine dimensions X/Y: approx. 4,700 mm / 2,350 mm Including Multilift handling unit. 3) Arburg 270C 300-100 Year of manufacture: 1999 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 1 Temperature control units: 6 Including Geiger handling unit. 4) Arburg 320C 300-100 Year of manufacture: 2000 Operating hours: 78,784 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 125 mm / 110 mm Max. opening stroke: 350 mm Platen gap: 350 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 320 mm / 320 mm Core pulls: 1 Temperature control units: 6 5) Arburg 220C 250-60 Year of manufacture: 2001 Operating hours: 86,595 h Clamping force: 250 kN Screw diameter: 22 mm Shot weight: 27 g Max. injection pressure: 2,340 bar Injection volume: 30 cm³ Centricity: 110 mm / 110 mm Ijdetyyn Hepfx Aahjtr Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 6) Arburg 270C 300-100 Year of manufacture: 2007 Operating hours: 59,885 h Clamping force: 300 kN Screw diameter: 20 mm Shot weight: 28 g Max. injection pressure: 2,500 bar Injection volume: 31 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 550 mm Platen gap: 550 mm Platen dimensions X/Y: 446 mm / 446 mm Tie bar spacing: 270 mm / 270 mm Core pulls: 2 Temperature control units: 6 Machine dimensions X/Y: approx. 3,750 mm / 2,400 mm Including Multilift handling unit. 7) Arburg 220S 250-60 Year of manufacture: 2001 Operating hours: 57,504 h Clamping force: 250 kN Screw diameter: 18 mm / 22 mm Shot weight: 18 g / 27 g Max. injection pressure: 2,500 bar / 2,340 bar Injection volume: 20 cm³ / 30 cm³ Centricity: 110 mm / 110 mm Max. opening stroke: 425 mm Platen gap: 425 mm Platen dimensions X/Y: 400 mm / 400 mm Tie bar spacing: 221 mm / 221 mm Core pulls: 1 Temperature control units: 6 Machine dimensions X/Y: approx. 3,300 mm / 1,100 mm Documentation available. Inspection on site possible.

Tahun pembuatan: 1996, jam operasional: 24.222 h, Kondisi: baik (bekas), This Dr. Boy injection moulding machine is currently located in the Plastima Used Machinery warehouse. The machine dates from 1996 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 80M – Year of manufacture: 1996 Itedopwh Akspfx Aaher – Screw diameter: 42 mm – Shot volume: 200 cm³ – Clamping force: 80T – Operating hours: 24,222

Tahun pembuatan: 1988, Kondisi: bekas, Lifting capacity: 6,000 kg Fork length: 1,900 mm Tire condition: 89% Serial number: GEF 2240 Itodorxxbtopfx Aahsr Lift height: 3,300 mm Machine weight: approx. 9,650 kg

Kondisi: bekas, nomor mesin/kendaraan: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3-knife rotor 2 rows of stator knives Feed opening approx. 300 x 280 mm Drive motor 11 kW Itodpfxeghgq Ns Aaher Equipped with noise protection enclosure, noise reduction hopper, and extraction fan

Kondisi: baru, HUBGERÄTE VON 5 - 10t GEWICHT TRANSPORTWAGEN VON 5 - 30t GEWICHT VIELFÄLTIGE AUSWAHL NEU AUF LAGER Isdpei Akpdefx Aahstr

Kondisi: bekas, tsl_001 Isdpfx Ajxcvqnjahotr

Kondisi: siap digunakan (bekas), Forklift truck Manufacturer: Jumbo Model: J60 DC12 Diesel Year of manufacture: 1994 Load capacity: 6,000 kg Own weight: 9,260 kg Lifting height: 4,300 mm Approx. 25,000 operating hours Sale due to switch to wheel loader All service and lubrication intervals have been carried out as documented in the inspection logbook! All filters (hydraulic, fuel, torque converter, air) have been replaced annually. Engine oil filter and oil changed every 250 operating hours. Only B0 diesel fuel used (no B7). Itodpfx Aovtwuaoahor Available immediately – fully functional Location: Austria, near St. Pölten

Kondisi: baik (bekas), Tahun pembuatan: 2008, Teile, die von Hand gezeigt werden, sind nicht enthalten. 12.000 U/min X 610 mm Y 420 mm Itjdpfsuc Tpgsx Aahjr Z 450 mm

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 1.219 mm, kecepatan rotasi (maks.): 2.000 rpm, jarak pergerakan landasan silang: 203 mm, Flat bed lathe Manufacturer: Haas Model: TL-2 S/N: XXXXX Itjdjwftdmjpfx Aaher Year of manufacture: 08-2005 Operating hours: n/a Control unit: Haas CNC Technical specifications: ----- - 4-position quick-change tool post, Parat system - Z-axis travel: 1,219 mm - X-axis travel: 203 mm - Swing over bed: 406 mm - Swing over cross slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3x Parat toolholders - 3-jaw chuck - Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: FANUC, diameter benda kerja (maks.): 32 mm, kecepatan rotasi (min.): 500 rpm, kecepatan rotasi (maks.): 30.000 rpm, berat keseluruhan: 1.700 kg, hidung spindel: HSK-E40, jumlah slot dalam magazin alat: 48, panjang alat: 95 mm, diameter alat: 63 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, 5-axis CNC machining center WILLEMIN MACODEL W408 MT TECHNICAL DATA Year: 2007 CNC Type: FANUC 16i-MB Number of axes: 5 X-axis travel: 250 [mm] Y-axis travel: 200 [mm] Z-axis travel: 300 [mm] Rapid traverse X, Y and Z: 30,000 [mm/min] Max. bar diameter at turning spindle: 32 [mm] Max. speed turning spindle: 6,000 [rpm] Max. power turning spindle: 3.7 [kW] C-axis rotary range: 360 [°] B-axis angular range: 115 [°] Spindle interface: HSK-E40 Min. spindle speed: 500 [rpm] Iodpswu Ruhofx Aahetr Max. spindle speed: 30,000 [rpm] Spindle power: 10 [kW] Number of tool magazine positions: 48 Max. tool length: 95 [mm] Max. tool diameter: 63 [mm] Coolant tank capacity: 80 [l] Coolant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Weight: 1,700 [kg] INCLUDING EQUIPMENT: x1 0-90° swiveling rear machining unit (6-sided machining) x1 rear machining chuck x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool measurement and tool breakage monitoring x68 collets type F35 for turning operations x9 HSK-40E milling/turning units x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 coolant chiller x1 ELBARON mist collector x1 3-color status indicator lamp x1 CO2 automatic fire extinguishing system (to be inspected by the buyer with an authorized authority) x1 set of technical manuals Price on request, loaded on truck included. Worldwide shipping possible. The information on this page has been compiled to the best of our knowledge and belief. Therefore, its accuracy cannot be guaranteed. HERMLE, DMU, Monoblock, variaxis, chiron