Ergotech - sistem 250/280-80

DEMAG

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 1.500 mm, Perlengkapan: dokumentasi / manual, specs-001 Gedpfoyfhw Hjx Ah Robi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Gsdjyugctopfx Ah Rsbi Year of Manufacture: 2008 Clamping Unit Clamping Force: 8,000 kN Tie Bar Distance (horizontal × vertical): 1120 × 1000 mm Platen Size (horizontal × vertical): 1620 × 1500 mm Minimum Mold Height: 500 mm Maximum Mold Height: 1050 mm Maximum Distance Between Platens: 2080 mm Maximum Mold Weight: 7,200 kg Opening Stroke: 1,030 mm Ejector Stroke: 350 mm Ejector Force: 139 kN Injection Unit Screw Diameter: 130 mm Shot Volume: 7,300 cm³ Shot Weight (PS): 6,640 g Maximum Injection Pressure: 1,300 bar Screw L/D Ratio: 20 L/D Electro-Hydraulic Equipment Pump Motor Rated Power: 110 kW Heater Power: 79 kW Hydraulic Oil Tank Capacity: 1,300 l Machine Dimensions and Weight Machine Dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine Weight: 33,500 kg Control Cabinet Weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system that increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electric power is consumed only when the machine requires it. Main Benefits - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of installation in existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net weight of machine: 74 t Weight of control cabinet: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel Gbsdjyugaljpfx Ah Rsi 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod (BS) with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor by using a frequency converter, adjusting the motor’s rotational speed according to the machine’s actual requirements during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key Benefits - Reduction in electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduction of energy losses during machine idle times - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 96.986 h, gaya penjepit: 600 kN, diameter sekrup: 30 mm, en-GB Gsdoyg Nfuepfx Ah Robi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 27.551 h, gaya penjepit: 2.200 kN, tinggi total: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Gsdox D Hnyepfx Ah Rjbi Additional Equipment • Sepro Robot SDR 22 Machine Advantages Technical Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max shot volume: 329 cm³ / max shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Clamping force: 2420 kN / maximum opening stroke: 550 mm / minimum mould height: 300 mm / maximum mould height: 580 mm / maximum platen distance: 1130 mm • Clamping platens (HxV): 880x830 mm / tie bar spacing (HxV): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, diameter sekrup: 45 mm, tinggi total: 2.213 mm, berat keseluruhan: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precise plastics processing. Take advantage of this opportunity to purchase the SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Please contact us for further information. Additional equipment • Fanuc robot Machine benefits Quality-related machine benefits • Process data acquisition, mould protection Technical machine benefits • Minimum mould height: 350 mm / maximum mould height: 745 mm • Electronic main connection: 3/400 V 50Hz • Programmable sequence, high-dynamic feed speed, hydraulic pressure-dependent hold pressure control, digital/wear-free position measuring system. Additional information Standard equipment: Support of the movable platen via linear guides/ Ejector with short/long stroke/ Interface for external printer (hard copy)/ Individual motion optimization of the axes (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Separate mains connection for drive / heating/ Coloured data display/ Enhanced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mould and machine cooling/ Basic version Europe/ Corrosion protection/ Painting: Jet Black (RAL9005): machine bed with built-in parts, lower control cabinet/ Signal White (RAL9003): clamping unit, injection unit, nozzle guard/ Signal White (RAL9003): fixed safety devices, upper control cabinet/ Signal White (RAL9003): protective doors/ Textured surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (EUROMAP March '96)/ Centre diameter fixed platen: 160 mm/ Centre diameter moving platen: 160 mm/ Without side ejector plate/ Standard mould installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only with protective door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mould movement)/ Oil lubrication of toggle/ Injection unit/ Optional equipment: Servo-controlled pump (activeDrive)/ Emergency stop switch on the operator side/ Separate opener for fine filtration in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Signal beacon/ Operation with protective door open (operator side)/ 6 pneumatic 5/2-way valves on the moving platen (programmable)/ 6 pneumatic 5/2-way valves on the fixed platen (programmable)/ Godpex D Hntofx Ah Robi Central maintenance unit for pneumatic valves/ 1-circuit core pull via proportional valve (programmable, with check valves)/ Manual pressure relief for 1-circuit core pull/ Widened protective cover on operator side (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mould protection via sensor during closing (activeQ)/ Manually adjustable monitoring switch for mould-open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/

Tahun pembuatan: 2019, jam operasional: 17.716 h, Kondisi: siap digunakan (bekas), Data Umum Gjdpfjx D Nx Iex Ah Rjbi Lebar pengukuran: 1920 cm Kedalaman pengukuran: 7750 cm Berat mesin: 26210 kg Tinggi pengukuran: 2410 mm SUMITOMO SHI DEMAG El-Exis SP 350/820-920 diproduksi pada tahun 2019. Mesin injection moulding listrik yang kokoh dengan diameter sekrup 40 mm dan gaya penahan 3.500 kN. Mesin ini telah beroperasi selama 17.716 jam dengan 12.440.761 siklus, memastikan kapasitas produksi yang tinggi. Jangan lewatkan kesempatan untuk membeli mesin injection moulding listrik SUMITOMO SHI DEMAG El-Exis SP 350/820-920 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Gjdpfox D Rqrsx Ah Rjbi

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific • Disconnectable via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) Gsdpfjx D Nlujx Ah Rjbi • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 17.577 h, gaya penjepit: 1.600 kN, tinggi total: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection moulding machine renowned for its precision and efficiency. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart available for sale. Please contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Advantages • Clamping unit: 160 / Clamping force: 1,760 kN / Maximum opening stroke: 495 mm / Minimum mould installation height: 275 mm / Maximum mould installation height: 585 mm • Maximum distance between platen faces: 1,080 mm / Mounting platen size (H x V): 760 x 785 mm / Clear tie bar distance (H x V): 520 x 520 mm • Ejector stroke: 125 mm / Ejection force: 35 kN • Injection unit: 340 / Screw diameter: 35 mm / L:D ratio: 20 / Injection rate (PS) without accumulator: 288 cm³/s • Metering stroke: 162 mm / Maximum nozzle stroke: 350 mm / Nozzle immersion depth (SVO): 20 mm / Nozzle contact force: 30 kN • Material hopper capacity: 35 L / Max. injection speed, standard: 300 mm/s / Max. injection speed, enhanced: 500 mm/s • Net weight without oil fill: 7,300 kg Additional Information Electrical and Pneumatic Interfaces: Power Sockets: 2 x Schuko (1Ph, 230V, 10A) 2 x IECEE (3Ph, 400V, 16A) – disconnectable via main switch Additional Schuko socket also provided (same rating) Valves: 1 x pneumatic 5/2 valve on moving platen (programmable) 2 x pneumatic 5/2 valves on stationary platen (programmable) I/O: 3 digital inputs / 3 digital outputs (freely programmable) Terminal block outside control cabinet Air & Cooling: Centralised air supply and piping Cooling system: open circuit Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Separate water supply connection for cooling (mould + machine) Deactivation of mould cooling (programmable by time) Mechanical Properties and Movement: Clamping and injection unit colours: Jet black (RAL9005): bed, pump unit, base cabinet Signal white (RAL9003): clamping unit, injection unit, safety guards, covers, safety doors Mould mounting platens: E-standard arrangement (similar to EUROMAP, March 1996) No lateral ejector plate Ejector: held in front position against spring-loaded ejector in mould Standard mould height Standard closing speed Motion only active with safety guard closed Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter Non-return valve: 3-piece, ring design Control, Programming and Monitoring: Gsdpfox D Hnmsx Ah Rsbi Inputs/outputs and interlock logic: freely programmable Switching programs (e.g., dry cycle, start-up scrap counter, timer-controlled cooling) Injection process: Max. injection force at max. injection speed: 200 mm/s Back pressure programmable via 6-step polygon Hold pressure switchover dependent on melt pressure Post-injection, back pressure, metering: closed-loop control Feed throat temperature control: closed-loop, max. 90°C ±9°C Reduced nozzle closure force (programmable) Clamping force: closed-loop control