Mesin cetak injeksi

DEMAG Multi 80/420-80h/120v

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Injection Moulding Machine Demag Multi 80/420-80h/120v Year of manufacture: 2005 Machine type: Two-component injection moulding machine (2K) Control system: NC4 Control Drive type: Hydraulic Technical specifications – Clamping unit: Clamping force: 800 kN Clearance between tie bars: 420 × 420 mm Platen dimensions: 590 × 600 mm Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum distance between platens: 750 mm Injection unit – Two-component: First unit (horizontal): Nitrided screw Screw diameter: 18 mm Second unit (vertical): Ksdpfxoww H Nyo Aahsfa Bimetallic screw Screw diameter: 25 mm General data: Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and additional information: Control language: German Full machine history – available

Kondisi: baik (bekas), Tahun pembuatan: 2000, Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g Kfedpfxerthkue Aahja New ARB 777 temperature control board (cost: €2,750)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7154-0118, gaya penjepit: 800 kN, langkah pembukaan: 500 mm, lebar pelat: 590 mm, tinggi pelat: 600 mm, TECHNICAL DETAILS Control type: NC 4 control Clamping system: Hydraulic Clamping force: 800 kN Clear distance between columns: 420 mm x 420 mm Platen dimensions: 590 mm x 600 mm Minimum mould size: 250 mm Maximum opening stroke: 500 mm Maximum daylight between platens: 750 mm Screw diameter (horizontal): 18 mm Screw diameter (vertical): 25 mm MACHINE DETAILS Motor power: 18.5 kW Heaters: 8.8 kW Dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg Main connection: 400 V, 50 Hz, 135 A Maximum pressure: 210 bar Maximum flow rate: 130 l/min EQUIPMENT Kodpfewp I Syox Aahsfa - Two-component machine - Nitrided horizontal system - Vertical unit with bimetallic screw - Complete machine documentation available

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 67.092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control System: UNILOG B4 Year of Manufacture: 2003 Operating Hours: 67,092 h Technical Data – Clamping Unit Clamping Force: 10,000 kN Tie Bar Spacing (h x v): 1,120 x 1,400 mm Platen Size (h x v): 1,960 x 1,690 mm Min. Mold Height: 550 mm Max. Mold Height: 1,020 mm Max. Daylight: 2,120 mm Opening Stroke: 1,100 mm Ejector Stroke: 300 mm Ejector Force: 118 kN Moving Platen Centering Diameter: 250 mm Fixed Platen Centering Diameter: 315 mm Kodpfx Aerdyq Reahsfa Technical Data – Injection Unit Screw Diameter: 120 mm Shot Volume: 5,655 cm³ Injection Pressure: 1,632 bar Screw L/D Ratio: 22 l/d Screw Stroke: 500 mm Screw Speed: 130 rpm Screw Torque: 11,370 N·m Plasticizing Rate (PS): 144 g/s Free Injection Rate (PS): 1,144 g/s Number of Heating Zones: 8 Nozzle Stroke: 700 mm Dimensions & Weight Machine Dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total Weight: 76,500 kg Equipment Display Language: German Compact Flash Drive 4x Hydraulic Core Pulls Leveling Elements EUROMAP 12 Interface Interface for Temperature Control Unit Enlarged Oil Cooler 16x Tool Heating Circuits

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged mounting platen: 660 x 560 mm Kfsdspdr Aispfx Aahja Minimum mold height: 200 mm

Kondisi: siap digunakan (bekas), Used machine Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No lead time, available immediately Inspection possible by appointment The machine is currently not powered / No cooling water connection The machine is professionally stored Technical data: Clamping force (kN): 800 Mounting plate (mm): 610×610 Tie bar spacing (mm): Installation height (mm): 250 Clearance between plates (mm): 750 Control system: MC4 Display language: German Injection unit screw diameter (mm): 45 Injection pressure (bar): 1878 Stroke volume (cm³): 275 Pump drive power (kW): 18.5 Heating power (kW): 13 Oil capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Kfjdpfx Aaeu Ti Srohsa Further photos on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Refrigeration Unit Brand: Ers Model: SC 110.V/5 Kfodpfed I Tlhsx Aahsa Power: 8 kW Year of manufacture: 2000

Kondisi: baru, Tahun pembuatan: 2018, Rated capacity 20550/42°C Qa Coolant R134a/1430 Refrigerant Pressure 20 bar Total power requirement 14.5 kW Kfodpfoul Ekpsx Aahja Machine weight approx. 186 kg Space requirements approx. 0.5 x 0.5 x 2.1 m The models of the HYFRA Gamma series are designed as immersion chillers for cooling water, oil, and emulsions. The plug-and-play immersion chillers are installation-ready and can be used with a footprint as small as 0.5 m². This makes them highly suitable for integration into various machine layouts. Capacities of up to 28 kW are possible thanks to the compact design on only 0.5 m² of floor space. As a result, there are significant flexibility advantages when planning the production floor layout and a noticeable increase in productivity, as more manufacturing machines can be accommodated. In the compact models of our immersion chillers, the condenser is installed horizontally. This design ensures the chillers generate significantly less waste heat. Internal components thus remain unaffected by the heat. A robust agitator ensures a uniform medium temperature in the lubricant tank in all models of the series. For scheduled cleaning, the HYFRA Gamma series can be easily lifted out of the tank using fixed crane lugs. Immersion chiller: Powerful cooling directly at the application How does an immersion chiller work? With immersion chillers, the evaporator of the chiller is submerged directly in the cooling medium. The liquid is contained in a tank and is kept in continuous, vigorous motion to ensure efficient cooling. High-performance agitators assist with this process. What applications are immersion chillers suitable for? Immersion chillers are frequently used for temperature control of cooling lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces, such as during milling and grinding with CNC machines or conventional machine tools. Immersion chillers with modern controls and comprehensive equipment Depending on the required cooling capacity, HYFRA Gamma immersion chiller models are equipped with either FreeSmart or FreeAdvanced controllers. The combination of the FreeAdvanced controller and a touch panel provides a structured overview and easy reading of all relevant values. Both controllers are freely programmable and feature multiple digital and analog inputs and outputs. The FreeAdvanced controller additionally comes with a full-text display and supports Modbus-TCP.

Tahun pembuatan: 2008, Kondisi: baik (bekas), Regloplas 90 XL M temperature control unit, 90°C, 21.5 kW, year of manufacture: 2008. Price: €2,150. Contact: Mr. Rainer Eckerle. Kfedpjh Uubhsfx Aahja

Tahun pembuatan: 2020, Kondisi: baru, Plastic hopper dryer FASI CHD-50T, diameter 430 mm, height 1140 mm, 50 kg capacity, 3.9 kW, NEW Kfjdov Nkcvspfx Aahsa