Demag Systec 210-580-840 SERVO (2015)

Demag Systec 210-580-840

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has operated for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for further information. • The dosing unit (orange section) is not included. • Integrated socket combination, country-specific Ledpfox D Nluox Al Nerp • Disconnectable via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the moving mould mounting platen; • Programmable, supply via central air connection • Including hoses. Inputs and outputs are freely programmable; 3 inputs and 3 outputs; • Terminal outside of the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via directional control valve on moving platen; Q-independent (programmable); • With pilot-operated non-return valves to prevent core drift • Mould mounting dimensions E (similar to Euromap March 96) • With lateral ejector plate, locating diameter of fixed platen: 160 mm • Locating diameter of moving platen: • Increased mould installation height by 100.0 mm • Min: 340 mm • Max: 790 mm

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit Lodpfx Astrya Rel Njrp - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: Ljdpjy Hmfyofx Al Nerp As-new condition, only 5,290 operating hours.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 35.000 h, gaya penjepit: 100 kN, volume langkah: 51 cm³, tekanan injeksi: 2.800 batang, berat keseluruhan: 5.000 kg, diameter konveyor sekrup: 25 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Lsdpfx Ajwlkb Nel Njrp Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Perlengkapan: dokumentasi / manual, demag-systec-100-420-310-2015 Lrodpfx Asyg Eu Sjl Nep

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, en Lrodpfxev Stbmj Al Njp

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7169-2037, de-to-en-001 Lredpfxoygib Ns Al Nsp

Kondisi: bekas, Tahun pembuatan: 2004, gaya penjepit: 110 kN, volume langkah: 2.926 cm³, tekanan injeksi: 1.600 batang, berat keseluruhan: 5.650 kg, diameter konveyor sekrup: 45 mm, Dasar Pengiriman: ex lokasi Lsdpfx Alsymqz Re Nsrp Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3.548 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, berat injeksi: 294 g, berat keseluruhan: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, consider the SUMITOMO SHI DEMAG Systec 160/520-600 unit we have for sale. Contact us for further details. • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar Lrodpfx Alezbh Epe Nop • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive power: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Maximum mould weight: 1,300 kg • Maximum opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air valve x 5 Hydraulic core pull with proportional valve, controlled x 1 Hot runner controller x 5 Injection unit hardened – bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servo motors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Lodpfjzc Nwcjx Al Norp Travel range in axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor possible at additional cost Dimensions: Weight: 15,750 kg Length/width/height: 8.26x2.01x2.27 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request