Mesin cetak injeksi
DEMAG System 1500/1500-16000

Name: DEMAG System 1500/1500-16000
Brand: DEMAG
Availability: InStock

Tahun pembuatan

2008

Kondisi

Bekas

Lokasi

Wrocław

Mesin cetak injeksi DEMAG System 1500/1500-16000

Data mesin

Nama mesin:: Mesin cetak injeksi

Pabrikan:: DEMAG

Model:: System 1500/1500-16000

Tahun pembuatan:: 2008

Kondisi:: sangat baik (bekas)

Harga & Lokasi

Lokasi:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Hubungi

Rincian penawaran

ID iklan:: A21500937

Pembaruan:: terakhir pada 13.03.2026

Deskripsi

DEMAG System 1500/1500-16000 Injection Moulding Machine

Basic Data

Manufacturer: DEMAG
Model: System 1500/1500-16000
Year of manufacture: 2008

Clamping Unit
Clamping force: 15,000 kN
Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm
Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm
Minimum mould height: 700 mm
Maximum mould height: 1,400 mm
Maximum opening stroke: 2,900 mm

Injection Unit
Screw diameter: 145 mm
Injection volume: 10,981 cm³
Shot weight (PS): 9,880 g
Maximum injection pressure: 1,454 bar

Electrical and Hydraulic Equipment
Rated pump motor power: 165 kW
Heater power: 97 kW

Machine Dimensions and Weight
Lodpfx Aeyugaljptorn
Net weight of machine: 74 t
Weight of control cabinet: 21 t
Total weight: approx. 95 t
Dimensions (L × W × H):
14.4 × 3.4 × 2.9 m

Service History / Repairs
2010 – new screw with RSP and barrel
2015 – new IBED
2015 – new wiring plate
2017 – new motor and pump no. 2
2017 – new injection cylinder piston rod (BS) with seals
2017 – replacement of oil cooler circulation pump
2017 – replacement of TeachBox (robot)
2018 – replacement of pumps P1 + P3 (at 65,800 h)
2018 – hydraulic oil change

Optional Energy Saving System ESS (Energy Saving Systems)

The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines.

The system controls the operation of the hydraulic pump motor by using a frequency converter, adjusting the motor’s rotational speed according to the machine’s actual requirements during the production cycle. As a result, electrical energy is consumed only when it is truly needed.

Key Benefits
- Reduction in electrical energy consumption by up to 30%
- Servo drive technology for the hydraulic pump
- World-class, proven technology used in the plastics processing industry
- Reduction of energy losses during machine idle times
- Lower heating of the hydraulic system
- Extended service life of the motor and hydraulic components
- Possible retrofitting to existing hydraulic injection moulding machines

The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2019

72 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+48 71 70... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Lelang

Województwo dolnośląskie

10.574 km

Mesin cetak injeksi
DEMAGSystem 1500/1500-16000

Detail

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8673 0023, gaya penjepit: 15.000 kN, diameter sekrup: 145 mm, tekanan injeksi: 1.454 batang, lebar pelat: 1.880 mm, tinggi pelat: 2.150 mm, Regularly serviced machine – refer to repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H x V): 2,150 mm x 1,880 mm Clear distance between tie bars (H x V): 1,500 mm x 1,250 mm Min./Max. mold height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control system: DIAS Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Electrical connection Main connection: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history Ljdpfx Ajy T Hy Deptjrn 2010: New screw with RSP and barrel 2015: Ibed replaced 2015: Wiring board replaced 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with new seals 2017: Circulation pump for oil cooler replaced 2017: Teach box replaced (Rob) 2018: Pumps P 1 + 3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Lihat detail

Iklan kecil

Mesin cetak injeksi FERROMATIK MILACRON eQ-280 - 2290

Breda

11.394 km

Mesin cetak injeksi
FERROMATIK MILACRONeQ-280 - 2290

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2023, jam operasional: 50 h, Marke: Ferromatik Milacron GmbH Typ: eQ-280 - 2290 Baujahr: 2023 Betriebsstunden: 50 Stunden Schließkraft: 2.800 kN Schneckendurchmesser: 60 mm Einspritzdruck: 2.238 bar Schussvolumen max.: 905 cm³ Max. Abstand zwischen Holmen: 710 x 660 mm Min. Werkzeughöhe: 250 mm Max. Plattenabstand: 1.400 mm Abmessungen (LxBxH): 8.500 x 2.100 x 2.500 mm Lodpfxew Ebpws Aptern Gewicht: 18.400 kg

Lihat detail

Lelang

Województwo dolnośląskie

10.567 km

Mesin cetak injeksi
DEMAGSystem 1500/1500-16000

Detail

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 15.000 kN, diameter sekrup: 145 mm, tekanan injeksi: 1.454 batang, langkah pembukaan: 2.900 mm, tinggi alat: 1.400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mould height: 700 mm Max. mould height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Lrsdpfx Apexup T Hoten Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Net weight (with control cabinet): 74,000 + 21,000 kg Electrical & Hydraulic Equipment Rated pump motor power: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring plate 2017: New motor and 2nd pump 2017: New injection side BS cylinder piston with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of robotic teach pendant 2018: Replacement of pumps P1 + P3 (at 65,800 hours) 2018: Hydraulic oil replacement

Lihat detail

Iklan kecil

Mesin cetak injeksi DEMAG System 800/1120–9500

Wrocław

10.574 km

Mesin cetak injeksi
DEMAGSystem 800/1120–9500

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping Unit Parameter Value Clamping force 8,000 kN Mounting plate dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min./max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection Unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio 20 Electrical-Hydraulic Equipment Parameter Value Pump motor power 110 kW Ledpfxowy U E Uj Aptorn Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and Weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Lihat detail

Iklan kecil

Krauss Maffei KM 1600 - 17200 MX (2013) KraussMaffei KM 1600 – 17200 MX

Trenčianske Stankovce

10.519 km

Krauss Maffei KM 1600 - 17200 MX (2013)
KraussMaffeiKM 1600 – 17200 MX

Hubungi

Iklan kecil

Mesin injeksi dengan gaya penjepit di atas 5000 kN STORK S+6600 8650 rep

Jerman

11.152 km

Mesin injeksi dengan gaya penjepit di atas 5000 kN
STORKS+6600 8650 rep

Iklan kecil

Wioska

10.611 km

Pemrosesan PET

Hubungi

Iklan kecil

Engel DUO 4550/500 pico Engel DUO 4550/500 pico

Rumania

11.248 km

Engel DUO 4550/500 pico
EngelDUO 4550/500 pico

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW Lodpfxjx Nr Uxo Aptern • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Lihat detail

Iklan kecil

Engel DUO 7050/650 pico Engel DUO 7050/650 pico

Rumania

11.248 km

Engel DUO 7050/650 pico
EngelDUO 7050/650 pico

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.244 h, gaya penjepit: 6.500 kN, diameter sekrup: 105 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, Engel DUO 7050/650 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penutupan sebesar 6.500 kN, volume injeksi maksimum 4.160 cm³, dan diameter screw 105 mm. Mesin dilengkapi dengan antarmuka robot (Euromap 67) dan berada dalam kondisi sangat baik. Jika Anda mencari mesin injeksi plastik berkualitas tinggi, mesin Engel DUO 7050/650 pico yang kami tawarkan layak untuk dipertimbangkan. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Volume injeksi maksimum: 4.160 cm³ • Tinggi cetakan minimum: 450 mm • Tinggi cetakan maksimum: 950 mm • Jarak buka platen: 1.400 mm • Dimensi platen penjepit (P × L): 1.510 × 1.440 mm • Jarak antar kolom: 1.100 × 960 mm Lrodpfjx Nr R Hsx Aptsn • Daya motor: 161 kW • Daya pemanas: 73,9 kW • Jumlah pin listrik: 32 • Radius nozzle (di ujung): R35 • Diameter cincin pusat: 200 mm • Jumlah core: 0 • Jumlah zona pemanas: 0 • Tahun pembuatan: 2013 • Jam operasi: ca. 60.244 jam • Kondisi: Sangat baik • Status: Masih produksi Fitur Tambahan • Dilengkapi robot: Ya • Antarmuka robot: Euromap 67

Lihat detail

Iklan kecil

Mesin cetak injeksi Sumitomo DEMAG IntElect 2 350/830-2200 mit Roboter-Sys

Kreuztal

11.194 km

Mesin cetak injeksi
Sumitomo DEMAGIntElect 2 350/830-2200 mit Roboter-Sys

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Lrodpfx Asy Hmfysptjn Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Lihat detail

Beriklan di sini