Sistem Demag 500/900-3300 (2006)

Demag System 500/900-3300

Kondisi: bekas, Tahun pembuatan: 2001, gaya penjepit: 60 kN, volume langkah: 224 cm³, tekanan injeksi: 2.224 batang, berat keseluruhan: 3.350 kg, jam kerja: 60.790 h, diameter konveyor sekrup: 18 mm, Min. die height: 15mm_Max. platens opening distance: 575+ mm Payment terms: 100% before machine takeover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: overhauled Operating hours: 60,790 CLAMPING UNIT: - Clamping force: 60 t Opening stroke: 425 mm Min. die height: 350 mm Max. die height: - Nwodpfxsh Tk Rvj Abujb Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering (nozzle-ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Shot volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: - Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3.6 kW Pump drive power: 11.0 kW Total connected load: motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 16 kVA, produsen pengendali: Heidenhain, model controller: ITNC 530, beban meja: 800 kg, berat keseluruhan: 5.300 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 12 W, hidung spindel: ISO B40, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Machine in very good condition and maintained by the manufacturer. Nwodpfx Abewxrgteujb Available immediately. Renishaw probe. Video available upon request. Delivery and installation by our team possible.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring Nwsdsx E Dncjpfx Abueb - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Nedpfocxxx Hex Abuowb Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) * Pneumatic clutch-brake combination * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) Nwodpsnxh T Rsfx Abueb OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Kondisi: bekas, HYDRAULIC PRESS CAMP 250 t Double-column press Piston stroke: 500 mm Table dimensions: 570 x 570 mm Distance from table to piston: 600 mm Distance between columns: 570 mm Approach speed: 95 mm/s Working speed: 7.5 mm/s Return speed: 135 mm/s Nwsdpegr Ur Rjfx Abueb Motor power: 30 HP

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, max. edge banding thickness 0.2 - 15 mm Feed speed 12 / 18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edging Nsdpfx Abefbr S Reuewb Granulate quick-heating tank End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / push buttons Extendable roller support Acoustic enclosure Machine length 3,800 mm Note on used machines: • Technical data is subject to errors and prior sale. • Prices quoted are ex location - free loading! • The machine has been cleaned and functionally tested. • All machines are sold "as seen" without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid if made in writing. (We will only respond to enquiries that include your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2007, Kecepatan putar 8000 rpm Berat 5500 kg Tahun pembuatan 2007 Kontrol Siemens 840D Dimensi (Panjang/Lebar/Tinggi) 3600 x 2800 x 2400 mm Perjalanan sumbu-x 1035 mm Nedpfx Aewm Rqaobuowb Perjalanan sumbu-y 560 mm Perjalanan sumbu-z 510 mm Lebih banyak gambar tersedia

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) Nodpenh Rnujfx Abuowb INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), INJECTION MOLDING MACHINE KRAUSS-MAFFEI 150-700 C1 Njdpfx Ajh S Dncjbujwb Year: 1999 Screw diameter: 55 mm In excellent condition, still in operation