Lintasan rak palet gudang teluk tinggi

Dexion P 90 / Kopftraverse / 2.695 mm / 4 HK

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. Ffodpjh Ek Daefx Adgot The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2009, Dexion Speedlock Pallet Racking P90 H RA1094 The galvanized Dexion pallet racking P90H is ideal for storing your pallets and provides a highly efficient, flexible solution for every requirement. Product details: - Upright frame type P90 H, bracing bolted - Height x depth 8,450 x 1,100 mm - Post width 90 mm. Beam type SLI 2,700 mm including locking pins - Shelf load 1,200 kg with evenly distributed load - Floor fixing to be provided on site Example: Starter bay length 2,880 mm + extension bay length 2,790 mm Starter bay consists of: - 2 upright frames - 10 beams including locking pins Ffodpfx Ask Aa Dzedget Extension bay consists of: - 1 upright frame - 10 beams including locking pins Technical specifications: Manufacturer: Dexion Frame type: P90 H Beam type: SLI 2700 mm Year of manufacture: 2009 Shelf load: 1,200 kg with evenly distributed load Condition: good For larger requirements, we will be happy to offer you a suitable, customized pallet rack solution. Accessories are available on request, e.g. used corner protectors €45.00 (each) Delivery information: Collection possible at any time by appointment. Freight costs can be determined upon notification of shipping address. Delivery ex works, packing excluded, loading included, without unloading or internal transport. Subject to prior sale. For personalized, professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminium flat conveyor belt including 4 suspension points Dimensions: 6000 + 520 x 105 mm Conveyor belt width: 400 mm Fjdped Ra Ttjfx Adgjft PVC conveyor belt including carriers and wave edge * Optionally available with magnetic deflection roller at the end of the conveyor belt. * Optionally available with substructure * Custom designs available in all variants.

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Zusätzliche Ausstattung: Zuführlänge: 8.270 mm / Maximale Holzlänge, Einlauf: 16.000 mm / Maximale Holzlänge, Auslauf: 12.000 mm / Zuführ-Querkette, 5-strängig, 2.200 mm / Ausziehbarer Holz-Auflagetisch / AQF-Kette mit Wellenverlängerung, 2.900 mm / Untertisch-Kappsäge schwenkbar / Gerader Schutzhauben-Klappe / Abfallentsorgung nach unten / Steuerung für Abfallentsorgungssystem / Universelle Fräsaggregat, 5-Achsen mit Profilfräser / Zinkenfräser / Keilzinkenfräser / Kombinierte Aufnahme für vertikal arbeitende Werkzeuge / Bohraggregat, 3,0 kW / Fingerfräser 1 / Kombinierte Aufnahme für horizontal arbeitende Werkzeuge / Schlitzaggregat, 480 mm / Bohraggregat 1, 2,2 kW / Bohraggregat 2, 2,2 kW / Markiereinrichtung, Referenzseite / Markiereinrichtung, Bedienerseite / Pneumatische Balkenwendestation / 7-armiger Auslauftisch / Verlängerungsrollenbahn, 5.300 mm Fodpfxsx D Ibho Adgeft Diese HUNDEGGER K2-5-450 wurde 2005 gebaut. Als robuste Abbundmaschine eignet sie sich hervorragend zum Sägen, Fräsen, Bohren und Schlitzen im Holzbau. Zu den Ausstattungsmerkmalen gehören eine 8,27 m Zuführlänge, ein ausziehbarer Holzauflage und mehrere Bohraggregate. Ideal für die präzise Verarbeitung von Holzelementen. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche: Fräsen (Holz)

Kondisi: baik (bekas), Tahun pembuatan: 2000, Weinig High Mech E6 Zuführung + A5 Ausförderung + Stapelanlage 1. Weinig Paket-Zuführ-Rollenbahn. 2. Weinig Paket-Kipper. 3. Weinig Flachketten-Quereinzug mit Einzelbretteinzug. Ffsdpfxswgbw Ro Adgst 4. Weinig Ausschleus-Sortiereinheit mit Rollenbahnen. 5. Weinig EM814 Hobelmaschinen-Zuführung mit Flachketteneinzug. 6. Weinig Ausführung 3m Förderband-Beschleuniger. 7. Rollenbahn mit Quereinzug-Kettenausschiebern. 8. Weinig Quereinzug-Pufferförderband. 9. Weinig Flachketten-Stapler mit Scherenhub-Rollenbahn. 10. Weinig Paket-Auslauf-Rollenbahnen. Optional ist ein zusätzliches Weinig Bündelungssystem erhältlich.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, MORBIDELLI M100 CNC machining centre Working area X-Y: 3,110 x 1,320 mm Max. workpiece height above vacuum pod: Z180 mm Technical Specifications Working range X-axis: 3,110 mm Working range Y-axis: 1,320 mm Panel pass-through Y: 1,600 mm Panel pass-through Z: 180 mm Workpiece length in pendulum operation: 1,400 + 1,400 mm Travel speed of X-Y axes PRO-SPACE: 56 m/min (184 ft/min) Travel speed of X-Y axes PRO-SPEED: 78 m/min (256 ft/min) PRO-SPACE Safety Devices 1 This allows the machine to be installed without perimeter safety fencing, thereby requiring less installation space. The safety devices are mounted directly on the machine frame. Max. X-axis speed = 25 m/min. 63.03.73 "TECPAD wired" remote control with 7" touchscreen display Tool changer TRB11 (Y=1,320 versions) FAST14 tool changer Ffjdjx Nrwgjpfx Adget 1 vacuum pump, capacity 250/300 m³/h at 50/60 Hz F31LTC drilling unit The F31LTC drilling unit is equipped as follows: Connection for vertical and horizontal drills Ø 10 mm, WELDON type (max. drill tip length = 70 mm) Distance between spindles: 32 mm 21 individually selectable vertical spindles 5 horizontal double-headed drilling units (one per side), 3 in X direction, 2 in Y direction Drill spindle speed: 4,500 rpm (with optional inverter: 2,500–8,000 rpm) 1 integrated saw blade in X direction (max. diameter 125 mm, thickness 2.2–6 mm) Saw blade speed: 5,500 rpm Drilling unit with inverter Pressure booster in Z-axis 5-axis unit version "JQX" 10 kW Included in the 5-axis unit: HSK 63F tool interface with dual reference surface for rigid connection between taper and electrospindle Standard electronic speed control from 1,800 to 24,000 rpm, with static inverter and rapid stop function Continuous output (S1/S6): 8.5/10 kW (11.5/13.6 HP) from 12,000 rpm B-axis rotation: ± 185° B-axis rotation speed: 7,000°/min C-axis rotation: ± 320° C-axis rotation speed: 7,000°/min CW/CCW rotation programmable via NC Internal air stream for perfect coupling to tool holder taper Cooling system with circulating coolant and external heat exchanger Ceramic ball bearings on the main shaft Internal compressed air circuit to prevent dust contamination Enclosed extraction hood for chip extraction, pneumatically switchable (ON-OFF) Extraction hood for 5-axis electrospindle 6 "TV FLEX" worktables 1,300 Chip and offcut conveyor belt for X = 3,110 mm 4 loading assistance devices H = 75 1,300 Front stops H = 75 for 6 supports Main reference stop at the front Vacuum cups 145x145 mm, H = 75 mm (12 pcs) Rotatable vacuum cups 145x55 mm, H = 75 mm (6 pcs) Additional hardware key for Maestro CNC (for USB slot) High-performance PC Location: ex site customer - Immediately available - System must be dismantled by the seller

Kondisi: baik (bekas), Technical data for the pallet racking system: Racking system: Dexion Type: P 90 Technical information regarding setup: Number of rack rows: 01 pc. Length per rack row: 15,600 mm Number of bays per rack row: 05 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x Pallet rack uprights, used Material color: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice frame) 6,000 mm high 1,100 mm deep 30x Pallet rack beams, used Material color: orange Beam type: SLI 120|14 S 350 I-profile: 120 x 50 mm Connector: 5 HK (hooks) Clear span: 3,000 mm Max. load per pair of beams: 1,800 kg, with evenly distributed load 60x Safety pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 24x Wedge anchors, new Fedpfx Adswnqrmjgsft Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: carbon steel, galvanized Approved for: cracked concrete 12x Leveling plates, used Finish: fully galvanized For leveling rack uprights installed on uneven floors 01x Load sign indicating bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping beyond that is subject to additional charges, which can be provided separately depending on destination and scope of delivery.

Kondisi: baik (bekas), en-001 Ffedpfewnfp Tjx Adgst

Kondisi: baru, Tahun pembuatan: 2025, Maße (Länge/Breite/Höhe) 4400x5000x3700 mm Weight: 4,500 kg Total power requirement: 3.8 kW Verleimstern VS-3000-16 The Verleimstern is designed for width and thickness gluing of timber, where the glued joints are air-dried. The Verleimstern requires minimal floor space and can be expanded modularly according to the workpiece dimensions and desired output. Furthermore, it is user-friendly and easy to maintain. The glued timber is placed into the clamping units, which are located on each section of the endless chain, and can be quickly and easily adjusted to suit varying workpiece dimensions. The Verleimstern is suitable for material thicknesses from 25 to 90 mm. For thinner or thicker materials, additional pressure elements (15–25 mm) must be used. Clamping units can be tightened manually, with a manually controlled hydraulic motor, or with an automatically controlled hydraulic motor. - Working length: 3,000 mm - Working width: 1,250 mm - Material thickness: 25–90 mm - Number of levels: 16 - Number of clamping units per level: 8 - Air connection: 8 bar, 1/2'' - Rotary drive motor power: 0.55 kW - Pressure per clamping unit: 1–12 kN - Max. load per level: 150 kg - Pneumatics: Camozzi - Electrics: Telemecanique - Gear motor: Watt - Clamping units are finger-jointed - Safety guard - Hydraulic unit - Pump flow rate: 6.3 l - Hydraulic motor power: 3.0 kW - Hydraulic tank capacity: 50 l - Max. hydraulic motor pressure: 110 bar - Transport dimensions: 3,800 x 2,400 x 2,200 mm, 1,400 kg 4,400 x 1,600 x 2,000 mm, 950 kg 1,600 x 1,600 x 800 mm, 900 kg 1,600 x 1,600 x 800 mm, 900 kg - Installation dimensions (L x W x H): 4,400 x 5,000 x 3,700 mm - Weight: 4,500 kg Options: - Pressure elements for thin panels (15–25 mm): €44.00/pc Fsdpev A Hxaofx Adgsft - Alignment with 4 pneumatic cylinders: €600.00

Kondisi: baik (bekas), Technical data for pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 unit Length per rack row: 28,000 mm Number of bays per rack row: 09 units Number of levels incl. ground level: 04 units Scope of delivery: 10x Pallet rack uprights, used Material finish: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice frame) 6,000 mm high 1,100 mm deep 72x Pallet rack beams, used Material finish: orange I-profile: 120 x 50 mm Beam type: SLI 120 |14 S 350 Connector: 5 HK Clear span: 3,000 mm Max. load per pair of beams: 1,800 kg, with evenly distributed load. Ffjdpfxowi N Naj Adgot 144x Safety locking pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lift-out 40x Anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Shim plates, used Design: fully galvanized For levelling the rack uprights when placed on uneven floors 01x Load sign With information on bay & compartment load capacities, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on delivery location and scope.