Prosesor plasma atmosfer

Diener PlasmaBeam Standard

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, CLEANROOM - ISO 8 | Requirements for Cleanroom ISO Class 8 | ISO 8 Cleanroom Classification | To achieve ISO 8 air cleanliness in Cleanroom environments, a multi-stage air filtration system is typically implemented (e.g. pre-filter G4, filter F9, final filter H13). Airflow within the room is non-unidirectional (there is mixing of "clean" supply air with "dirty" air already present in the room). Air exhausts in ISO 8 rooms are located on the walls. The required number of air changes per hour depends on the operations performed in the room and the number of personnel present, but a target range is 10–40 air changes per hour. In ISO 8 class, personnel may remain in the room continuously. Workers may wear standard workwear, and guests should wear disposable gowns. It is recommended to maintain a minimum positive room pressure relative to adjacent areas at 5–10 Pa. Requirements for equipment and materials intended for ISO 8 air cleanliness class Cleanrooms (maximum average number of particles released, when: number of samples taken = 100; measurement performed according to ISO 14644-14 in a cleanliness class at least one better than device usage class; particles/m³). Detailed description in photos. Itedpfxsq H H Ruo Akpsh Technical drawings attached in photos. Ventilation Description The goal of the installed ventilation system was to achieve the following air parameters in the Cleanroom. Construction was carried out using the GBD PHARMA 2000 system, compliant with all requirements for ‘cleanrooms’ in the highest air cleanliness classes. Parameters for the installation: a. Air cleanliness - ISO 8. b. Temperature 19–23°C c. humidity max 38%. a. To ensure the required supply air cleanliness, a DOSPEL air handling unit with a maximum capacity of V = 3500 m³/h [up to 15 air changes per hour] was used. The unit is equipped with bag filters: pre-filter FK EU5/EC2 and fine filter FK-EU9/EC2. Additionally, HEPA 11 filters by EUFILTER were fitted in ceiling diffusers. Catalog sheets in section H6. As a result, with a measured capacity of 3264 m³/h, ISO 7 cleanroom class [class “C”] was achieved at rest and ISO 8 class [class “D”] during operation. b. The temperature range of 19–23°C is easily maintained by the oversized cooler and unit at 25% fresh air share. c. To achieve the required conditions during summer with outside temperatures up to 30°C and humidity around 80%, a 31.4 kW freon cooler and a 33.5 kW refrigeration unit were used. The refrigeration unit is manufactured by FUJITSU and supplied by Klimatherm Gdańsk. The room maintains automatically regulated overpressure relative to external pressure – pressure difference at doors: 15 Pa. The ventilation automation allows for an “economy” mode, in which the system works in a closed loop, maintaining 15 Pa overpressure. Technical data attached in the photos.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 40 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S/N:01130421-2.24, jenis arus masuk: tiga fasa, tinggi total: 1.150 mm, lebar total: 1.200 mm, panjang total: 1.030 mm, tegangan masuk: 400 V, berat keseluruhan: 610 kg, panjang pemakanan sumbu X: 340 mm, panjang umpan sumbu Y: 320 mm, panjang umpan sumbu Z: 420 mm, jenis pendinginan: air, arus masuk: 16 A, jenis perlindungan (kode IP): IP20, daya laser: 600 W, frekuensi input: 100 Hz, panjang gelombang laser: 1.070 nm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, A nearly new Alpha Laser welding machine is being offered, including accessories (water cooler, welding fume extraction, lift table, and more). Average power: 600 W - pulse peak power CW: 9 kW The ALFlak systems consist of (basic configuration): - Laser with processing head and Leica observation optics - UV protective shield - Multifunction foot switch - Lighting - WIN Laser Software "BKS" - Joystick Iodpfxjvu Tdgo Akpjth Laser: Pulse and CW mode, pilot laser Motorized movement system Number of axes: 3 or 4 Travel range (X, Y, Z): approx. 320 x 330 x 370 mm Arm deflection / Working distance: approx. 1400 mm Incl. standard beam deflection unit (600-0365A) Incl. 12.1" touchscreen, new version (300-1171C) With door interlock on display mount Incl. magnetic beam protection plate (701-0687A) If interested, I will be happy to provide you with a detailed quotation.

Kondisi: sangat baik (bekas), Hilger & Kern P80 Pump Basic Version P80 Drum size: 80 l Transmission ratio (drive): 56:1 Delivery rate (at 20 double strokes) l/min: 0.61 Material viscosity (ball valve pump/piston pump): 2.5 million Working pressure (max.) bar: 20-250 (315) Air consumption at 20 double strokes l/min: 220 Base plate dimensions (A x B) mm: 610 x 500 Height retracted mm: 1400 Height extended mm: 2200 Weight without container kg: 65 / 72 Maximum container height mm: 750 Isdpfxjg Ib Npj Akpsth Maximum container size: 80 Maximum container outer Ø mm: 440 Scope of delivery includes a single pump Complete factory closure; large selection of mezzanine platforms, pallet racks, shelving racks, paternoster systems. High-quality industrial machines, lathes, grinding machines, hand-held machines More items – new and used – can be found in our shop! International shipping costs on request!