Penghentian panjang manual

Diethei MD 100 d(igital)

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. Dusdpfju R Szaex Aaqot - New exhibition machine -

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Duedpfx Aajwu Ez Nsqst

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Dedpfod Anz Rox Aaqsut Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 - 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: baru, diameter mata gergaji: 550 mm, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system Duedpfx Aaerh Dkyoqet - Minimum quantity lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover - Documentation - 400V

Kondisi: baru, Tahun pembuatan: 2022, EN23070101 Duedemf T Hpjpfx Aaqot

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: Dodpfxong Amko Aaqout The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Dirancang untuk pemotongan massal lamela penutup jendela dalam bentuk paket, pemotongan serentak kotak penutup jendela, pemotongan pilar samping, dan pemotongan serentak kotak penutup monoblok. • Pemotongan permukaan bersih berkat kecepatan putar gergaji yang tinggi • Sistem konveyor rol kanan dan kiri, masing-masing 3 meter x 2 unit • Kecepatan pemotongan gergaji dapat disesuaikan • Semua kotak penutup jendela, termasuk kotak hingga maksimum 350 mm, dapat dipotong • Pemotongan presisi berkat sistem rel linear Dusderamzfopfx Aaqot • Diameter mata gergaji Ø550 mm OPSIONAL • Sistem pendinginan • Dapat beroperasi dengan meter digital

Kondisi: baru, Tahun pembuatan: 2025, C3T model: Working area: 3048mm x 1524mm Laser output power: 6000W / 3000W / 2000W / 1500W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Dsdpjg D Nz Rsfx Aaqjut Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double High-Speed Exchange Tables The fast exchange of two tables significantly increases efficiency. The chain-driven system offers greater rigidity and higher accuracy, saving feeding time. 2. Tenon-and-Mortise Welded Bed Frame Utilizes traditional Chinese tenon-and-mortise structure to enhance load-bearing capacity. Welded joints and the structural support ensure long-term operational stability. The welded frame improves vibration absorption, reducing deviations caused by impacts and enabling more precise cutting. 3. Dual Automatic Self-Centering Electric Chucks The dual electric chucks with automatic self-centering function are easy to operate and low-maintenance. The brand-new motor provides precise control. Independently developed modular chuck components can be quickly replaced. 4. Auto-Focus Laser Cutting Head By setting separate focal lengths for piercing and cutting, cutting precision is improved. Suitable for various focal lengths, with the focal position automatically adjusted according to the thickness of different sheets. 5. Extended Aluminum Beam Aerospace-grade material with increased rigidity greatly reduces beam deformation during high-speed operation, improving high-speed directional sensitivity and processing efficiency.

Kondisi: baru, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: flat 300 x 180 mm Cutting capacity at 45°: round 210 mm Cutting capacity at 45°: square 190 mm Cutting capacity at 45°: flat 200 x 160 mm Cutting capacity at 60°: round 135 mm Cutting capacity at 60°: square 110 mm Cutting capacity at 60°: flat 130 x 100 mm Cutting capacity at 45° (right): round 180 mm Cutting capacity at 45° (right): square 160 mm Cutting capacity at 45° (right): flat 180 x 100 mm Dusdot I D Tujpfx Aaqot Total power requirement: 1.5/1.8 kW Machine weight: approx. 350 kg Space requirement: approx. 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left up to 60° and right up to 45° - Quick-release vice, slideable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Swarf removal brush - Machine base with automatic coolant system - Lockable main switch, separate emergency-stop - EMC (Electromagnetic compatibility), accident prevention regulations (UVV) - Current consumption display (indicates saw blade wear progression, tool monitoring) - Automatic increased performance with the proven Berg & Schmid 3-stage AutoCut system

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Bodor, jenis laser: laser serat, de Duodpfohv U Szsx Aaqjt