Penghentian panjang manual

Diethei MD 100h(andrad)

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Lredpfswu Ez Nox Apten

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, • Complies with CE standards • Machine capable of performing door, sash, handle barrel, and triple drilling operations on aluminum and PVC profiles • CNC controlled 10" touchscreen display Ledpsra Nybefx Aptsrn • 3 independent axes (AXIS) • Cooling system for aluminum profiles • Right and left arm and stop measuring system • Precision operation enabled by linear rail system • Adjustable speed settings for all operations • Easy transition between aluminum and PVC profiles with automatic speed adjustment via touchscreen interface • Unlimited memory capacity • Automatic safety cover for protection • Servo motor system on X, Y, and Z axes

Kondisi: baru, Tahun pembuatan: 2026, De volledig automatische machine is ontworpen voor het snijden van middelgrote tot grote aluminium profielen met gebruiksvriendelijke automatisering. Plaats eenvoudigweg een aluminium profiel op de machine; deze detecteert het profiel automatisch en voert de snijbewerkingen uit met uiterst nauwkeurige, door een servomotor aangestuurde materiaalpositionering. Met Excel-joblijsten via WIFI kunnen grote snijlijsten efficiënt worden ingevoerd. Bij elk aluminium profiel dat u plaatst, ongeacht de lengte, meet een lasersensor de exacte lengte. Een krachtige optimalisatie-algoritme berekent onmiddellijk de optimale snijvolgorde voor minimaal materiaalverlies. De machine verwerkt de berekende snijlijst volledig automatisch, zonder onderbrekingen. U hoeft niets in te voeren – blijf alleen nieuwe aluminium profielen invoeren. Dit systeem is een eenvoudig en snel alternatief voor dubbele verstekzagen. Voer simpelweg de gewenste lengtes en hoeken in (of importeer deze) en druk op START. De machine produceert continu nauwkeurige verstekonderdelen op hoge snelheid. • Volautomatische zaagmachine met automatische aanvoer en op lengte zagen. • Gebruiksvriendelijke bediening voor automatisch werken – werkstuk invoeren en binnen enkele seconden snijden. • Eenvoudig enkelstuks, batch- of grote Excel-lijsten verwerken. • Bundel-/meervoudige stangen snijden en tellen. • Externe WIFI-input van Excel-joblijsten met uitgebreide datamapping mogelijkheden. • Volledig instelbare zaag- en aanvoersnelheden voor maximale verwerkingssnelheid. Lsdsf Ekn Iepfx Aptjrn • Automatische optimalisatiemodus met laser-meetfunctie en restmateriaal-minimalisatie (optioneel). • Automatische etikettenprinter voor onderdelen aansturing vanuit jobliste (handmatige etikettering, optioneel). • Inline, direct-op-materiaal printer zonder operator-inbreng vereist (optioneel). • Barcodes of QR-codes printen of scannen voor job-invoer (optioneel). • Geautomatiseerde servo-positie-instelling van de zaagkop tot ±75° (optioneel). Uitermate geschikt voor: • Productie van ramen en deuren • Productie van aluminium verstekconstructies • Productie van gefabriceerde aluminiumconstructies • Composietproductie • Productie van jaloezieën, zonwering en meubelen • Verkoop van aluminium profielen Model: A550 Lengte: 3 m Lineaire eenheid: ProfiStop Alpha Materiaalinvoer: 1680 mm Duwcapaciteit: 20 – 40 kg Software: Optimiser HOOGWAARDIGE, IN AUSTRALIË GEFABRICEERDE MACHINES.

Kondisi: baru, Tahun pembuatan: 2025, diameter mata gergaji: 550 mm, tegangan masuk: 400 V, sambungan udara terkompresi: 7 batang, Perlengkapan: dokumentasi / manual, - Saw blade 550 mm - Double mitre - 4 pneumatic clamps - Hydrocheck system - Misting lubrication system - 1 roller conveyor 300 cm Lrsdpfxehzuu Ns Aptsn - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cover - Documentation - 400V

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, berat keseluruhan: 2.492 kg, Metall circular saw from 2013. This Elumatec DG 244 offers a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It features a motorized swivel range from 22.5° to 140°, and comes equipped with a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, consider the Elumatec DG 244, which we are offering for sale. Contact us for further details. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control unit: E 355 (2-axis controller) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cutting and oversize lengths (E355/E555) • Software interface: Compatible with window construction software Lrodpfx Asyv H Tisptsn Additional equipment • Short length stop: Included with stationary setup • Profile lifting rail set: Included for both stationary and mobile use • Roller conveyor: 1.5 m, mobile, 400 mm width, suitable for dust extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2 kW

Kondisi: baru, Tahun pembuatan: 2026, Efficient, quiet and powerful mechanical machine Technical specifications: Working length: 4040 mm Overall length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5000 kg Maximum bending thickness: Steel: 1.5 mm Aluminium: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet metal: 3.00 mm Ledpfxex Hyhbs Aptsrn Standard equipment: 1 rail 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam 1 insert rail, 10/100 mm and 24/100 mm for the folding beam Foot switch (the MAF 400/CNC model comes with a second foot switch) Soft start for folding beam Rear gauge with electric drive, 8-1000 mm 5 m power cable with 32 A mains plug (for the EU market) Power supply: 3 x 400 V, 50 Hz (for the EU market) CNC S-Touch control: From profile design to bending precision in record time Standard equipment at no extra charge: • Graphical display of bending sequences for the selected program • Graphical representation of sheet position before each bend • Operator guidance – each working stage is visually illustrated by a graphical control system • Programming without submenus • Direct touch correction of the required section of the profile • Programmable bend angle correction • Set repetitions for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, backgauge, bending angle, lifting height, edge closing • Profile search possible by name, sketch selection and drawing on the touch screen • 21.5-inch LCD touchscreen monitor with high-quality graphics • USB port for backup and program transfer • Permanent memory for over 3000 programs • Freely selectable program names (profile name) • Recording of produced quantity and machine working time • 16 languages • Remote support (Team Viewer) • Soft start of the bending beam • Rear gauge with drive 6-1000 mm • Foot switch In the EU: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg Lredpfou R Szaex Aptsn with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Kondisi: baru, The Jantar is the most popular model in the Eckert machinery lineup, valued for its dynamic performance and efficiency. It is widely used by both large industrial enterprises and medium-sized companies seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems, as well as a range of extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s construction has been optimized over years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Key Features • Attractive pricing for a well-equipped base version • High-dynamic, precise cutting for 2D applications, pipes, and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Option to flexibly extend the length of the working area Technical Data Drive AC Servo Available Working Widths 1,500; 2,000; 2,500; 3,000 mm Available Working Lengths Any length starting from 1,500 mm Lredpfof Alb Aox Apten Positioning Speed 25,000 mm/min Cutting Thickness up to 100 mm Cutting Quality DIN-EN ISO 9013 Positioning Accuracy DIN-EN 28206 Repeatability DIN-EN 28206 Electrical Systems DIN-EN 81346 Safety Module DIN-EN 13850 Working Height 740-760 mm Operating Temperature +5 °C to 45 °C Operating Humidity max. 90%

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range: 0.01 - 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction Lrodpfxod Anz Rs Apton

Kondisi: bekas, 7 pieces of folding tools for folding machine, length 3000 mm Ledpfsb D Ry Rox Aptsrn