Garis Sambungan Jari

DIMTER ProfiJoint line 600 KD

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Nedpou Uh T Djfx Agyowp Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: baru, Tahun pembuatan: 2025, Semi-automatic optimizing crosscut saw with electronic positioner featuring push/stop operation mode COST-OPTIMIZING SAWING SOLUTION Superpush 150 is the entry-level center for cutting and optimization. Developed as a direct technological evolution of traditional cutting methods, it is capable of increasing productivity and maximizing wood yield. EXCEPTIONALLY ROBUST Heavy-duty, fully welded and reinforced painted steel frame. Horizontal table with movable guard to facilitate workpiece loading. Carriage operating both as length stop and pusher. Linear unit with steel-reinforced toothed belt and linear bearing guides. Continuous horizontal piece accumulation table, 300 mm wide. Nwedpfxog Hzvge Agyep TECHNOLOGICALLY INNOVATIVE Electronic system featuring an integrated CNC touchscreen control panel. Linux-based software with customized interface. 15.6” color resistive touchscreen display for full safety in industrial settings. Program import via USB. Remote teleservice capability via Internet. + Excel macro integration. FAST S4U Lite software suite. Brushless positioner motor with digital servo driver. Quick-select interface for Stop/Pusher mode. Adjustable cutting speed. RELIABLE AND SAFE Ball bearing slides with double dust protection. Freestanding electrical cabinet, separated from the machine. Independent pneumatic adjustments for adapting to different processing types. Two-hand safety control for cutting operation. CE-certified machine from a Notified Certification Body (not self-certified).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SK-K-24001, 1 optimised cross-cutting system with scanner manufacturer: dimter type: opticut 450 year of manufacture: 2015 item no.: sk-k-24001 dimter cross-cutting system with 1 x opticut 450 and f 100 infeed system Nodpfx Agjwya Syoyswp including luxscan combiscan+ c 200 with curvature measurement the system was in operation until 2024, has been professionally dismantled, and is available for inspection in its current condition.

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Njdju Atmujpfx Agyswp Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A Weinig angle line for window and door production is available. Maximum tool outside diameter: 320 mm, maximum tool cutting circle: 232 mm, mortising spindle length: 640 mm, profiling and co-directional play length: 285 mm to 320 mm, control system: Siemens WS400. Includes complete tooling set and sash window equipment. Documentation available. Nodpfxetq U A Ie Agyewp

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lisec IG line for double and triple glazing units up to 2500 x 1600 mm, year of construction 1993 - 1999, consisting of: - RTV-38/16WE, washing machine infeed conveyor, 1993 - VHW-16V8, glass washing machine with 8 brushes for Low-E glass, 2 hot water tanks, 2 sand filters and blower, 1993 - RTVB-16/16ST, washing machine outfeed conveyor, 1997 - Sofsolution line scanner - RTVB-11/16 ST, infeed conveyor frame set, 1997 - RSVB-27/16, frame section, 1997 - RTVB-27/16MZ, measuring section for gas filling press, 1997 - FPS-25/16U, argon gas filling press, 1997 - RTVB-22/16ST, outfeed conveyor 1 for the press, 1997 - RTVB-22/16ST, outfeed conveyor 2 for the press, 1997 - RTVB-27/16ST, outfeed conveyor 3 for the press, 1997 - RTVB-11/16, infeed conveyor for cork applicator, 1997 Nwodpfor Iil Eox Agyep - APK-3/16, automatic cork application unit, 1997 - RTVB-11/16, outfeed conveyor for cork application unit, 1997 - RTVB-11/16VE, infeed conveyor for sealing robot, 1999 - VL-1N/16, automatic sealing machine for double and triple glazing units, 1999 - VLA-25, VL extension with corner correction rollers, 1999 - DOS-1/PU, mixing and dosing station for PU, with nozzle removal device, 1999

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, norwegian-01 Nodpfx Agomgc I Nsyswp

Tahun pembuatan: 1997, Kondisi: sangat baik (bekas), Window manufacturing machines Nwjdeiix Uvspfx Agyjp WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Profiling and counter-milling machine UNIVAR 10, year 1997

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Glue nozzle profile according to tool FC-10 PZ6/2 PRESS Specifications: Njdpfx Agjlu D Tfsyewp Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Finger Jointing Line GOMA FC-10 KZ6 Polish production Year of manufacture: 2002 Njdpet Sfz Ijfx Agyjwp Technical documentation with declaration of conformity included TECHNICAL SPECIFICATIONS: - Wood width min/max: 40 / 160 mm - Wood thickness min/max: 25 / 80 mm - Length of single glued segment: 6000 mm - Clamping force: 7500 kg / 100 atm SAW - Saw blade diameter: 300 mm - Motor power: 6 kW - Milling cutter power: 15 kW PRESS - Hydraulic pump power: 4 kW - Operating pressure: 100 bar