Pusat pembubutan dan penggilingan CNC

DMG Gildemeister Sprint 65 linear

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Main spindle: Max. bar capacity: 65mm, draw tube bore: 75mm, collet chuck diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Sub-spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5,000 rpm, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis sub-spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal feed force (S1): 2,400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal feed force (S1): 5,000N. Workpiece discharge (UA-WA): max. discharge weight: 4daN, max. discharge diameter: 70mm. Total number of tool stations: 12, tool holder clamping diameter: 30mm, driven tool positions: 12, max. speed of driven tools: 4,000 rpm, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4,000/min): 2.9kW, CNC control: Siemens 840D, operator panel: ErgoLine, display: 19” TFT color, spindle count (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h powered on, 48,657h in production. Machine runs on cutting oil. Including documentation and FMB Turbo 8-80 XT 3200 bar feeder. On-site inspection possible. Ppjdpfx Aljyln Ekj Ior

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mesin dalam kondisi kerja yang baik. Psdpeyufn Iofx Al Ijpr Unit kontrol: Heidenhain TNC 530. Suku cadang yang ditunjukkan dengan tangan tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center – DMG GILDEMEISTER – CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper compound slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, taper: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar capacity: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-milling spindle: * Tool taper: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine footprint approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight approx.: 18.5 t EQUIPMENT: Well equipped … Ppjdpfx Alsw Hg Nlo Ier * No steady rest * Complete documentation available No guarantee as to the completeness or accuracy of the technical data or equipment. Detailed technical specification sheet and equipment information available on request.

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ppedpot Hw Iijfx Al Ier Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Control system: Heidenhain Mill Plus V600 Machine weight: approx. 7000 kg 24,000 rpm 16x HSK63A tool changer Ppjdpfx Aewgi Drsl Ior 40 bar internal coolant supply 250 liter coolant tank Chip conveyor

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Ppjdpfsmf Aw Ajx Al Ier Number of spindles: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Mesin Bubut CNC Pabrikan: Gildemeister Tipe: CTX 420 linear V3 Tahun pembuatan: 2003 Kontrol: Heidenhain Plus IT Diameter putar di atas ranjang: 680 mm Diameter putar di atas dudukan: 565 mm Jarak lintasan sumbu X: 260 mm Jarak lintasan sumbu Z: 635 mm Daya penggerak 40/100%: 25/37 kW Kisaran putaran: 20 – 5000 rpm Berat sekitar: 6500 kg Perlengkapan: Tool driven: 12 posisi Tool turret: Revolver Sauter 12-posisi VDI 30 Chuck separuh hollow Tailstock Pergerakan pinol otomatis Kepala pinol: Mk 5 Konveyor serbuk Ppedpfxexc Uq To Al Ior Lengan pengukur Penyedot kabut oli Spesifikasi dapat berubah sewaktu-waktu.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 - Max. bar diameter: 22 [mm] - Spindle speed: 10,000 [rpm] - Spindle power: 8.7/15 [kW] - Torque: 10/18 [Nm] - Number of counter spindles: 2 - Counter spindle speed: 10,000 [rpm] - Number of slides: 10 - Travel distances: X x Z = 62 x 85 [mm] - Number of slides in counter-operation: 2 - Stroke: X = 62 [mm] - Dimensions: 3330 x 1830 x 2860 [mm] - Weight: 5,700 [kg] - Connected load: 75 [kVA] - Production hours: 20,000 [h] ACCESSORIES - CN Siemens 840D SL - 2x NCU - TRANSMIT / TRACYL function - ARTIS - 2 additional electronic shaft preparations - 2 SCARA counter spindles Psdpfx Ajw Ah R Nsl Ispr - 2 parts collectors with conveyor belt - Chip catcher for bar waste - Index bar guide - Bar loader predisposition - Fire protection system

Tahun pembuatan: 2007, Kondisi: baik (bekas), nomor mesin/kendaraan: 1380-1207, mit Siemens Sinumerik Bedienpanel mit Späneförderer Bedienpult Elektroschrank Spindeldurchlass 60 mm Pjdpfx Asm Nb Riol Iopr max. Werkstücklänge 340 mm

Kondisi: bekas, OFFER We can offer you, subject to prior sale and errors, from stock, without obligation: DECKEL MAHO CNC Universal Milling Machine Model: DMU 50 M Year of manufacture: 1998 Ppedpsv Td Elsfx Al Ior ----- Working range: Longitudinal travel X-axis 500 mm Vertical travel Z-axis 400 mm Cross travel Y-axis 400 mm C-axis – Table rotation, manual 360° B-axis – Table tilt, manual ° Table dimensions Ø 700 x 500 mm Swivel range of table ° Table rotatability 360° Maximum workpiece weight 200 kg Installation height between table and spindle approx. 550 mm Reach between machine base and spindle min./max. 2 – 6 mm Tool holder SK 40 Spindle speeds infinitely programmable 20 – 4,500 rpm Feed rates / rapid traverse max. 5,000 mm/min AC main drive 0%/40% duty cycle approx. 9 / 13 kW Total power approx. 15 kW - 400 V - 50 Hz Weight approx. 3,000 kg Accessories / Special equipment: • 3-axis path control HEIDENHAIN TNC 124 with display and direct input of all data, with electronic handwheels for all three axes. • All three axes integrated into the milling head, so even "irregular" workpieces can be machined on the fixed table. • Rotary table manually rotatable 360°, manually tiltable +/-° (each with clamping). Digital readout of tilt angles integrated into the control unit. • Basic coolant system, attached control cabinet (SIEMENS components). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good condition! Ideal for training purposes or single-part production! Please click here for a video of the machine: Delivery: from stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice Always a large selection of milling machines in stock – please inquire about your requirements!