Mesin bubut otomatis CNC

DMG MORI NLX 2500SY/700

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Bdodpfx Aloyzxcgeasb Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Base machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, Dengan kontrol rel Siemens 840 D sl Operate Tahun pembuatan: 2016 Perjalanan sumbu: X 400 Y 400 Z 375 mm Rentang putaran: 20 – 20.000 rpm tanpa langkah Dengan perlengkapan berikut: Meja bundar NC berputar dan miring 450 mm x 400 mm termasuk pendingin meja Penukar alat 60 posisi dengan penjepit ganda (HSK 63) Bsdpfeylpa Nox Alasdb 50 pcs holder alat HSK 63 Probe ukur 3D Renishaw Handwheel elektronik Sistem penjepit titik nol Lang dengan ragum IKZ 40 bar dengan filter pita kertas Konveyor serpihan logam tipe belt scraper Pembilasan tempat tidur mesin Pendingin aktif untuk lemari kontrol Pendingin spindle: sirkulasi air Rotoclear Pistol pembilas serpihan Sistem pengukuran langsung Udara tiup melalui tengah spindle 3 buah kaki mesin yang dapat diatur ketinggiannya Manual pengoperasian

Kondisi: bekas, Tahun pembuatan: 2017, en Bdsdpfxeyxpv Se Alasb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 23.501 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 705 mm, diameter pembubutan: 366 mm, daya motor spindle: 18 W, kecepatan spindel (min.): 4.000 rpm, kecepatan spindel (maks.): 10.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 795 mm, kecepatan rotasi (maks.): 10.000 rpm, tinggi total: 2.395 mm, panjang total: 5.330 mm, lebar total: 4.100 mm, berat keseluruhan: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool magazine Number of tool stations: 20 Tool mount: BMT40 Upper turret Number of tool stations: 20 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse: 30 Main spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Max. torque Nm: 49 Sub spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/cont) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling system Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal tower High-pressure pump Touch probe Paper band filter Machine runtime: Hours powered on: 23,501 Cutting time: 7,494 Nominal power kVA: 48 Basic machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Bdodeywtwwjpfx Alajb Height mm: 2,395 Weight kg: 8,360

Kondisi: bekas, Tahun pembuatan: 2005, #de-001 Bjdeyb S Ihopfx Alajdb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 23.501 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 740 mm, diameter pembubutan: 920 mm, daya motor spindle: 18 W, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 795 mm, panjang spindle milling: 91 mm, kecepatan rotasi (maks.): 10.000 rpm, tinggi total: 2.395 mm, panjang total: 5.330 mm, lebar total: 4.100 mm, diameter ayun di atas peluncur silang: 740 mm, hidung spindel: JIS A2-8, berat keseluruhan: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS – ERGOline Touch) Capabilities X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: Ø366 Turning diameter over bed mm: Ø920 Turning diameter over cross slide mm: 740 Bar capacity mm: 80 Tool Magazines Number of tool stations: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Driven tools output kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Bdsdpfx Aewkf H Delaob Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Counter Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Counter spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal light High-pressure pump Mist separator Work area lamp Dual foot switch for main and sub spindle Coolant gun Probe Paper band filter Preparation for robot operation Robot Data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in warehouse (10 slots) Clamping by robot: Ø40 to 220mm x Height 20mm Max. workpiece weight for robot: 5.6kg Machine Runtime: Power on hours: 23,501 Rated power kVA: 48 Cutting time: 7,494 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Kondisi: bekas, Tahun pembuatan: 2017, nlx2500sy_hu Bodpoxzk Ifsfx Alaedb

Kondisi: baik (bekas), Tahun pembuatan: 2012, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. X1020mm Y610mm Z610mm. 12.000 rpm, 25 kW, 160 Nm. Unit kontrol: HEIDENHAIN iTNC 530. Sumbu keempat akan dikirim tanpa suku cadang yang ditunjukkan dengan tangan. Bdedpfjx Awzbox Alaob

Kondisi: bekas, Tahun pembuatan: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Bdsdpfx Alju Hq Rloasb Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter ( - ) mm Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Shank height for square tools: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range - driven tools: max. 10,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space required approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Kondisi: bekas, Tahun pembuatan: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control system: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Counter-spindle speed range: 6,000 rpm Counter-spindle drive power: 11 / 7.5 kW Spindle bore (counter-spindle): 43 mm C-axis (counter-spindle): 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Bjdpfxjvy Ig He Alaedb Driven tool speed range: max. 10,000 rpm Drive power for driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Counter-spindle - Driven tool - C and Y axes

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, daya laser: 4.000 W, EN Bdjdpfsuthz Tex Alasb