Pusat bubut-milling CNC

DMG CTX Alpha 500

Description:

The machine is in good technical condition; testing is possible by prior arrangement. Control system – Siemens, including filtration unit. Bed incline, bed material, number of guideways: 45°, cast iron, 3 (4 with optional Y-axis).

WORKING AREA (V1–V4):
- Swing diameter over bed: 19.69 in
- Swing diameter over cross slide: 11.42 in
- Maximum turning diameter: 7.87 in
- Distance between centers: 30.71 in
- Maximum turning length: 19.69 in
- Max. workpiece weight (unsupported, cantilevered): 35 lbs
- Max. distance of the center of gravity of unsupported section from spindle face: 165 in
- Max. workpiece weight clamped between centers: 100 lbs
- Travel in X-axis: 7.48 in
- Travel in Y-axis (op.): 3.14 in (+/- 1.57)
- Z1-axis travel: [data missing]
- Z3-axis travel: [data missing]
- Spindle axis height above floor: 20.67 in, 21.65 in, 39.26 in (38.77 + 1.18)

MAIN SPINDLE:
- Spindle nose (flat face): type FL 140h5
- Chuck (diameter): 6.69 in (opt. 8.26 in)
- Bar capacity: 2.01 in
- Spindle bore diameter: 2.87 in
- Guide bush diameter: 2.05 in
Tsdox Apkzjpfx Aatjf
- Front bearing inner diameter: 3.94 in
- Spindle bearing lubrication: grease
- Power, max. 100/40% duty cycle: 20.82/36.20 hp
- Speed range, 100% duty cycle: 6000 rpm
- Speed range, 40% duty cycle: 6000 rpm
- Nominal speed: 1500 rpm
- Torque, max. 100/40% duty cycle: 93.72/125.46 ft-lb
- Voltage type/range: AC/1
- Motor type: ISM52

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.