Mesin bubut CNC

DN Solutions PUMA2600 SLYB II

For sale: CNC turning center with sub-spindle and Y-axis. In excellent condition. Purchased new in mid-2023 and still in operation. The machine has less than 8,000 operating hours and is used well below its technical capabilities. Serviced exclusively by the authorized distributor. Fully set up for robotic integration: autodoor, signal outputs for communication. Equipped with a parts conveyor and oil mist filter. IMPORTANT: The robot is not included in this offer – separate sale and integration support possible upon individual quote.

TECHNICAL DATA (according to manufacturer's specifications):

1) Capacity
Swing over bed: 680 mm
Swing over cross slide: 630 mm
Maximum turning diameter: 376 mm
Recommended turning diameter: 315 mm
Maximum turning length: 1245 mm
Allowable workpiece weight (incl. chuck):
In chuck: 500 kg (1000 kg with support)
Bar capacity in main spindle: 102 mm

2) Main Spindle
Chuck size: 315 mm
Spindle nose: A2-11 ASA
Front spindle bearing diameter: 160 mm
Spindle bore: 115 mm
Chuck through-hole: 103 mm
Spindle motor power (continuous/30 min): 26/22/18.5 kW (S3 25%/S6 60%/S1 Cont.)
Spindle speed range: up to 2,800 rpm
Max. spindle torque: 1,123 Nm (15 min S3 15%)
Drive: belt

3) Sub-Spindle
Chuck size: 175 mm (optionally 210 mm)
Spindle nose: A2-5 ASA
Sub-spindle bore: 62 mm
Sub-spindle cylinder bore: 50 mm (H8)
Sub-spindle motor power (continuous/30 min): 7.5/5.5 kW (30 min/S1 Cont.)
Sub-spindle speed range: up to 4,500 rpm
Max. sub-spindle torque (30 min): 85 Nm
Drive: belt

4) Axes Travel
X-axis: 260 mm
Z-axis: 1350 mm
Y-axis: 105 (±52.5) mm
Bedpfx Agsx Rqkuoqedi
B-axis: 1350 mm
C-axis: 1,2 360° (0.001° increments)
Rapid traverse X-axis: 30 m/min
Rapid traverse Z-axis: 30 m/min
Rapid traverse Y-axis: 10 m/min
Rapid traverse B-axis: 30 m/min
C-axis rotation: 200 rpm

5) Bed and Saddle
Slant bed, angle: 30°
Bed guideways (Z-axis): 437 mm
Saddle guideways (X, Y): 321/325 mm
Sub-spindle travel: 335 mm

6) Tool System
Turret type: BMT 65P
Number of tools: 12
Tool size: 25 x 25 mm
Max. drill diameter: 50/32 mm (main spindle/sub-spindle)
Driven tool power: 7.5/1.5 kW (5 min/Cont.)
Driven tool speed: 5,000 rpm
Driven tool max. torque: 95.5 Nm
Driven tool collets (ER32): Φ3–Φ20 mm (option)
Turret indexing: 1 position, 0.15 s (1.2 s for full station)
Max. driven tool drilling diameter: Φ20 mm
Tapping: M20 x P2.5

7) Hydraulic System
Tank capacity: 20 l
Flow rate (60 Hz / 50 Hz): 25 / 20.8 l/min
Pressure: 2.2 kW x 5.0 MPa

8) Coolant System
Tank capacity: 250 l
Flow rate: 30 l/min
Pressure: 0.7 kW x 0.15/0.1 MPa (60/50Hz)

9) Accuracy
Positioning: X, Z, Y axes 0.01 mm; C-axis 0.0167°
Repeatability: X, Z, Y axes ±0.002/0.003 mm; C-axis ±0.006°

10) Other
Electrical control: as per detailed specification

For questions or additional information, please feel free to message or call us.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.