Mesin bor radial cepat

DONAU Donaumeric 440

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Codpfsy Nd T Hox Ag Djgt Feed range: 0.075 – 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: Machine Features • Worktable 1800 x 600 mm with 4 T-slots • Arm traverse: 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at rear of machine base • 2 T-slots (18 mm) on left of machine base • Tapping device • Central lubrication system • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min.: 70 mm / max.: 680 mm Distance spindle nose – floor min.: 970 mm / max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity solid: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis over 1200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: 2800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all angles, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining operation, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Any clamped rectangular parts - Any clamped round parts - Aligning cast and flame-cut parts - Angle position detection of round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm Cedpfx Aolgvkieg Dogt - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PRJ062775, Machining performance: Drilling capacity in solid St 60/40 mm Drilling capacity in solid GG 20/50 mm Thread cutting capacity St 60/M 36 Thread cutting capacity GG 20/M 42 WORKING AREA: Arm travel (Y-axis) 1050 mm Column stroke (W-axis) 410 mm Quill stroke (Z-axis) 200 mm Distance spindle lower edge – table upper edge, drilling radius 80–690 mm Swivel angle (C-axis) 330 degrees Central clamping of arm and column MACHINE TABLE Clamping surface work table 1800 x 600 mm With 4 T-slots as per DIN 650 in X-direction (width/spacing) 18 h9/125 mm Machine table height 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides. 215 x 160 mm, Cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking, and boring. Chip breaking/relief: possible during drilling cycle Drilling patterns: Linear, circular hole patterns, matrix Standard software: Conversational programming, 38 zero points storable, rotary and mirror function, teach-in for X, Y, Z. Test graphic: Graphic display of hole patterns Data interfaces: V.24/RS 232-C USB: For importing and exporting data, industrial-grade 256 MB MAIN SPINDLE DRIVE: Three-phase asynchronous motor, frequency-controlled Drive power (100% duty cycle) 5.5 kW Torque (100% duty cycle) 250 Nm Constant from 15–200 rpm Infinitely variable spindle speed range 12–2800 rpm Taper spindle: Tool holder as per DIN 69871 SK40 With drawbar as per DIN 69872-19 AXIS DRIVES C-/Y-/Z-/W-axis max. 0.35/0.35/2.90/2.40 kW Rapid traverse speed, infinitely variable C-axis max. 4.5 rpm, Y-/Z-axis max. 7.5/5.0 m/min Csdowmcatepfx Ag Degt W-axis max. 3.0 m/min Feed speed, infinitely variable C-/Y-/Z-/W-axis 5–2000 mm/min Feed force (Z-axis) max. 12,000 N LUBRICATION Central manual lubrication MACHINE GUARDING Safety fence system arranged around the machine, with mesh grid External dimensions 6000 x 6000 mm (W x H), system element height approx. 2000 mm 1 access (swing gate at machine front, opening width approx. 2000 mm), manual open/close. Safety door switch with magnetic interlock. ELECTRICAL, PNEUMATIC, HYDRAULIC EQUIPMENT CONNECTION Connected load 400/50 V/Hz Control voltage 24 V Power consumption 13 kVA Fuse 35 A Operating voltage: 3 x 400 V AC / N / PE +5% –10%, N conductor loadable, frequency 50 Hz. PAINTWORK DD textured paint Machine upper part light grey RAL 7035, machine lower part RAL 5023 TRANSPORT DIMENSIONS Width 1,900 mm Depth 2,565 mm Height 2,788 mm MACHINE WEIGHT Machine as transport unit with standard table approx. 2,950 kg OPTIONS: Base plate With surrounding coolant channel, clamping surface 1000 x 1400 mm, height 100 mm, with 4 T-slots Electronic probe Incl. SK 40 holder Pick-up tool magazine Programmable tool change for rear workstation. Magazine unit with 5 tool places including protective cover is mounted on right side of the machine. Coolant unit Version A Integrated in machine base for units without consideration of a base plate. Consisting of: Coolant tank with 35 l capacity, coolant pump complete with fittings, delivery rate approx. 40 l/min at 0.4 bar.

Kondisi: bekas, Tahun pembuatan: 2008, de-to-hu-it-lt-b6ce6f8d Csdpfxjviqybj Ag Dogt

Kondisi: baru, Mesin frais universal Merek: OPTimill Model: MT 50 No. Art.: 3336005 Kondisi: Mesin baru Perjalanan sumbu: - Sumbu X 580 mm - Sumbu Y 200 mm - Sumbu Z 340 mm Dilengkapi standar dengan: - Display digital 3 sumbu DPA 31 PLUS - Feeding otomatis pada sumbu X - Arbor frais panjang 16 mm - Arbor frais panjang 22 mm - Dudukan chuck bor B 18 Cgjdpfxobnfxue Ag Dst - Chuck bor gerigi 3-16 mm/B 18 - Adaptor reduksi MK 2 dengan slot pendorong - Adaptor reduksi MK 3 dengan slot pendorong - Lampu mesin - Sistem pendingin - Perlengkapan alat operasi - Manual instruksi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, DE001 Codpjv Ild Sofx Ag Djgt

Kondisi: baru, Tahun pembuatan: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art.No. 6020 The fully automatic UniBohrFix 100 drilling machine positions, clamps, and drills your material on the X-axis at the desired position. All you need to do is press the start button. The horizontal gripper of the positioning system allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or loading an already written program, the machine operates completely autonomously. The Y-axis can be set by the operator via a handwheel with digital display. Advantages • A series of holes is automatically drilled at precise intervals. • Operator errors are significantly reduced. • Programming takes just a few minutes. • Excellent price-performance ratio. Cgjdsfu Itbjpfx Ag Djt • Significantly reduced manpower requirement. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vise (clamping range 200 mm) Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (Technical data see data sheet) Anti-rotation device Motorized height adjustment Thread cutting device NC positioning system PD 200p Feed force 200 kg Positioning by absolute or incremental values possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic end stop clamp with high holding force Steel guide rail with precision rack Steel carrier profile for dirt protection Infeed and outfeed roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm Load capacity 200 kg/m Height-adjustable rollers Mounting brackets Roller width 407 mm Insert plates Bracings Roller diameter 50 mm Steel rollers We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: diremajakan ulang (bekas), Carpigiani specialized service, 100% refurbished machine. New pumps, complete gasket set, new blade—practically like new. Pasteurization function, 2+1 flavours, 2x20 liter hoppers, 65 kg/h output, air-cooled. 2 units available. Cgjdpjwi U N Sofx Ag Djt

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Cjdpfx Aou Nfvusg Degt Ram surface: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: bekas, Tahun pembuatan: 2003, de-hu-001 Csdjxiy Auopfx Ag Dsgt