Pusat pemesinan vertikal

DOOSAN DNM 4500

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2016, jam operasional: 13.425 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: FANUC, model controller: 0i-MF, beban meja: 600 kg, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, daya motor spindle: 15 W, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan vertikal BEKAS "DOOSAN model DNM 4500" dengan kontrol CNC Fanuc 0i-MF Gbjdpfxsynlzus Ap Dor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 7.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 560 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, model controller: FANUC 21iMB, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 12.000 rpm, hidung spindel: BT-40, jumlah slot dalam magazin alat: 30, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, it-hu-center-di-lavoro-victor-a110 Gbedsx Hap Ejpfx Ap Dsr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, produsen pengendali: HEIDENHAIN, model controller: HEIDENHAIN TNC-620, tinggi total: 2.500 mm, panjang total: 3.600 mm, lebar total: 2.500 mm, lebar meja: 1.000 mm, panjang meja: 450 mm, beban meja: 600 kg, berat keseluruhan: 5.000 kg, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, USATO vertical machining center "DOOSAN DNM 4500" with Heidenhain TNC-620 CNC control Gbedpfew D Dy Nox Ap Dsr

Kondisi: bekas, Tahun pembuatan: 2000, en-001 Gbedpfxst Hw Rds Ap Dor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Gsdpsyuzg Hofx Ap Dsbr Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology 5-axis simultaneous operation available

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine as per photos Condition: Very good, apart from a defective slot in the tool magazine. Gsdpsvf D Anjfx Ap Dsbr Tool holders included.

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Gbsdpolz Rvlsfx Ap Dor Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 570 mm, lubang spindel: 62 mm, panjang pembubutan: 1.250 mm, diameter pembubutan di atas alas geser: 365 mm, tinggi pusat: 280 mm, berat keseluruhan: 4.000 kg, OFFER We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: VDF - BOEHRINGER Cycle-Controlled Universal Lathe Type: DUS 560 Year of Manufacture: 1998 / completely overhauled in 2008 Centre height: 280 mm Max. swing diameter over bed: 570 mm Max. swing diameter over cross slide: 365 mm Cross slide/traverse slide travel: 345/125 mm Distance between centres / max. turning length: 1,250 mm Gbedpfsyqw Eqex Ap Dor Spindle bore: 62 mm Spindle speeds, 2-step, infinitely variable: 3-500/15 – 2,500 rpm Longitudinal and cross feeds, infinitely variable: 0.01-50 mm/rev Rapid traverse longitudinal/cross: 5 and 10 m/min Max. feed force, cross/longitudinal: 6.5 / 12.5 kN Max. workpiece weight between centres/with tailstock: 400/1,000 kg Thread pitches: 0.1 – 400 mm/pitch Spindle drive: 15/21 kW Total power: 25 kW - 400 V - 50 Hz Weight approx.: 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, Type 805, with direct input of all turning parameters using interactive user interfaces and suitable software, control and monitor integrated in the sliding door, with extended memory and free-form contour programming, graphics, etc. • 2 electronic hand wheels for fine adjustment of slide movement in Z and X axes and new joystick for rapid traverse in +Z/-Z and +X/-X, joystick for the main spindle with stepless speed control, forward and reverse • Fitted 3-jaw chuck SCA model, Ø 300 mm, faceplate approx. Ø 500, 4-jaw chuck 315 mm Ø, driving plate approx. 250 mm, simple faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost Type CD with 5 different Multifix holders • Separate tool holder block for mounting CAPTO toolholder with internal coolant supply, various holders, some with collets • Tailstock with air bearing for easy movement, work lamp • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate control cabinet, adjustable spindle end stop, work lamp, etc. Condition: very good – guides in excellent condition, ready for demonstration under power Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to your order. Numerous other lathes in all sizes available in stock – please contact us for further offers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, 400 mm swing diameter O F F E R We can offer you, subject to prior sale and errors excepted, available ex stock, on a non-binding basis: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Plunge Grinding Attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 Godexyllvjpfx Ap Dsbr _____ Internal grinding diameter range: 40 - 400 mm Max. grinding depth: 315 mm Max. external grinding diameter: 400 mm Max. workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivelling, max.: 30° Workpiece headstock transverse adjustment, max.: 400 mm Grinding spindle stock Z-feed: 70 mm Grinding spindle stock transverse adjustment, approx.: 100 mm Grinding head infeed, interval cycle: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Max. table travel: 630 mm Steplessly adjustable table speed: 0.1 – 8 m/min (10 m/min) Max. distance between workpiece headstock and grinding spindle: 1,250 mm Grinding spindle stock movement on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special Equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or multiple diameters, external grinding, and face grinding of narrow faces • Plunge grinding attachment, hydraulically swivelling, with automatic cycles for grinding one or multiple faces as well as stepped faces simultaneously • Electronic program control with large operator panel and ammeter for both grinding spindles • Belt-driven grinding spindle with built-in spindle and 5 separate interchangeable grinding spindles with various pulleys of differing diameters • Dressing units for both grinding spindles; large chuck guard on the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw chuck approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, pulleys, spindle sleeves, grinding wheel holders, foot switch • Separate hydraulic unit, attached electrical cabinet, coolant system with magnetic separator Condition: Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 590 mm, lubang spindel: 78 mm, kecepatan spindel (maks.): 3.000 rpm, Perlengkapan: dokumentasi / manual, Panjang pembubutan: 750 mm Diameter pembubutan: 590 mm di atas tempat tidur / 375 mm di atas dudukan silang Kecepatan spindle: 25 - 3.000 rpm Gedpfx Apexmvzus Dsbr Lubang spindle: 78 mm Turret: 10 kantong Kontrol: Siemens 810D Shopmill Dilengkapi dengan: - Pedal kaki ganda - Konveyor serpihan - Manual pengoperasian Negara asal: Korea Selatan Daya motor: 25 kW Berat mesin: 6.000 kg Dimensi mesin PxLxT: 300 x 180 x 190 cm