Mesin bubut CNC

Doosan Lynx 2100LSY

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 300 mm, diameter putar di atas sled silang: 20 mm, diameter pembubutan: 20 mm, kecepatan spindel (min.): 10.000 rpm, kecepatan spindel (maks.): 10.000 rpm, lubang spindel: 20 mm, kecepatan rotasi (maks.): 10.000 rpm, daya: 30 kW (40,79 hp), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm Iedpeq Nmm Ejfx Ab Ioa bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Kondisi: bekas, Tahun pembuatan: 1996, Spindle diameter: 60 mm X-axis travel: max. 1000 mm - min. 100 mm Y-axis travel: max. 1000 mm - min. 100 mm Drilling capacity in steel: max. 40 mm Tapping capacity: max. M24 Thickness: max. 60 mm - min. 5 mm Isdpfxegvkkzo Ab Iea Spindle speeds: stepless, adjustable 1 - 1,000 rpm Feed rate: steplessly adjustable, rapid traverse 1 mm/min Feed rate: steplessly adjustable, working feed mm/min Feed force: 16 kN Tool holder: SK 40 Spindle stroke: 600 mm Positioning speed in all axes: 1 - 10,000 mm/min Positioning accuracy over 300 mm: +/- 0.01 mm Table load capacity: max. 500 kg Working height: 1,000 mm Machine weight: approx. 4.8 t Space requirement: approx. 3.5 x 3.3 x 3.1 m Control system: Bosch CNC Plate Drilling Machine HMB PBM1000/60 - W12 for drilling end plates and base plates in structural steelwork, equipped with tool changer (12-position) Number of drill spindles: 1 pc. Operating voltage: 220/380 V Frequency: 50 Hz Total connected load: 22 kVA

Kondisi: baru, WMD45A ROGI Drilling and Milling Machine Isdpfx Abjga Tyzo Iea VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout, brand SINO * Automatic longitudinal feed of the worktable * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head electrically height-adjustable * Various tools in case

Tahun pembuatan: 1974, Kondisi: bekas, Druck: 340 t Hub: 200 mm Tischgröße unten: 100 x 800 mm Abstand zwischen Ober- und Untertisch: - geöffnet: 510 mm (Lichte Weite) - geschlossen: 310 mm Neue Hydraulik- und Elektriksysteme Iedpfx Ao Du Uwsb Isa

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die Maschine ist in gutem Zustand, Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. SK 40, 24 Werkzeugplätze im Werkzeugwechsler. Isdpfx Abswk Nm Is Iea 10.000 U/min

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Max. machinable length: 320 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 2.2 / 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of stations: 9 - Number of live tool stations: 4 - Driven tool speed: 6,000 (T01-T02-T03) / 4,000 (T04) [rpm] - Driven tool power: 1 [kW] - Travel X/Y: 142 / 348 [mm] TOOL HOLDER 2 - Number of stations: 3 TOOL HOLDER WITH B-AXIS - Number of stations: 8 - Number of live tool stations: 4 - Driven tool speed: 5,000 [rpm] Iedpfx Aewdalnob Ija - Driven tool power: 1 [kW] - B-axis stroke: 0 - 135 [degrees] SUB MACHINING - Number of stations: 8 - Number of live tool stations: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT UNIT - Number of stations: 2 - Number of live tool stations: 2 - Driven tool speed: 8,000 [rpm] - Driven tool power: 1 [kW] ELECTRICAL SUPPLY - Total connected load: 21 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 2,150 x 1,280 [mm] - Machine height: 2,010 [mm] - Machine weight: 3,600 [kg] MACHINE HOURS - Powered hours: 37,855 [h] - Operating hours: 9,578 [h] ACCESSORIES - Control: Fanuc 31i-B5 - Interface: RS232 / PCMCIA / RJ45 / USB - Driven guide bush - Parts removal - Parts ejector - Parts conveyor belt - Chip conveyor - Coolant tank: MULLER COMBILOOP CL2 * with high-pressure pump: 100 [bar] - Bar feeder: IEMCA BOSS 338 HD / 32 LL - Electrical transformer

Kondisi: bekas, Tahun pembuatan: 2014, DOOSAN DNM 650 II Vertical Machining Center Year of initial installation: 2014 CNC Control: Siemens Sinumerik 828 D Table dimensions: 1,300 mm x 670 mm Maximum table load: 1,000 kg Axis travels: - X: 1,270 mm - Y: 670 mm - Z: 625 mm Tool magazine: 30 positions Taper: ISO 40 Maximum spindle speed: 12,000 rpm Iodswcg I Tepfx Ab Ija Spindle internal coolant / high-pressure system Spindle motor power: 15 kW Machine in excellent condition Complete with full documentation/manuals Weight: 8,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Bernardo FM 45 V Drilling and Milling Machine The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to its standard quill feed. The dovetail guide of the gearbox head ensures maximum precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed (12): 50 - 2520 rpm Spindle taper: MT4 Quill stroke: 120 mm Quill feed (3): 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Distance spindle/table: 40 - 485 mm Travel (X / Y): 550 / 190 mm Milling head vertical adjustment: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Weight approx.: 285 kg Standard equipment: - Automatic quill feed and tapping unit - Wide speed range 50 - 2520 rpm (12 steps) - Adjustable dovetail guides for X, Y, and Z axes - Versatile applications: slot milling, face milling, boring, etc. - Heavy-duty, large cross table with precision-ground surface - Milling: quill movement via hand wheel - Drilling: quill movement via hand wheel Iedpfxovutw Hj Ab Ioa - High-quality aluminum motor designed for continuous operation - Stable, vibration-free cast iron construction - Simple and quick speed change via shift lever - Swiveling milling head for angle drilling, chamfer milling, etc. Location: ex stock 54634 Bitburg - Available at short notice -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 6.050 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 213 mm, jarak lintasan sumbu Y: 572 mm, Pusat Bubut Haas Tipe: ST 25 Tahun: 2017 Jam kerja: 6047 jam Daya terukur maksimum, sistem penggerak: 22,4 kW, penggerak sabuk Kapasitas batang, kecepatan maksimum: 76,0 mm, 3400 rpm Rentang gerak sumbu (X, Z): 213 mm, 572 mm Conveyor serbuk chip Ijdpfx Aberdg H Hj Ija Diameter spindle lewat: 75 mm

Kondisi: baik (bekas), Tahun pembuatan: 2010, Centre lathe, Manufacturer: JET, Type: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Ijdpfsqwgzqex Ab Ija Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm Machine in good condition, from training workshop. Machine documentation available.