DOOSAN Puma 240 MB

DOOSAN Puma 240 MB

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Iedpfsxv Av Rex Abzjtl Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Kontrol Heidenhain iTNC 530 Perjalanan X/Y/Z: 2200 x 560 x 720 mm Kecepatan spindel 18.000 rpm Itedpfxjzg Nmks Abzol Luas bidang penjepitan 2600 x 600 mm Maks. beban meja 2200 kg Kepala putar Pendingin internal 25 bar Magazin alat untuk 30 alat, SK 40 Pilihan sumbu C atau A Probe pengukur Heidenhain TS 640 Konveyor serpihan Filter pita kertas

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang meja: 4.000 mm, lebar meja: 2.000 mm, kecepatan spindel (maks.): 22.000 rpm, torsi: 128 Nm, hidung spindel: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: 4,000 mm Transverse Y-axis travel: 2,200 mm Vertical Z-axis travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m2 T-slots for workpiece clamping, 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction parallel to the X-axis movement. Iodpfxjzb Evle Abzjtl AXIS SPECIFICATIONS: Axis feed rate: 50,000 mm/min Acceleration: 4 m/sec2 WORKING AREA Maximum horizontal clearance: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Internal cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s real capacity. 30-STATION HSK CHAIN TOOL MAGAZINE: Automatic chain tool changer with 30 stations located on the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max. tool diameter with adjacent pockets occupied: 90 mm Max. tool length: 300 mm Max. tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL COOLANT: Mist coolant system. The mist is produced by mixing air and oil. Actuated via M-code. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving surface finish. EXTERNAL TOOL COOLANT: System for distributing coolant, managed by the CNC with nozzles arranged around the spindle flange, complete with a 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum current required: 235 A Machine comes complete with: • Remote Heidenhain HR550 electronic handwheel • Various tool holders included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Two chip conveyors positioned on each side of the worktable • User and maintenance manuals and EC declaration of conformity

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Travel path: 240 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 7.5 [kW] - Minimum C-axis resolution: 0.1 [degree] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 6,000 [rpm] TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] BACKWORKING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Operating hours: 56,433 [h] Itedouhax Eopfx Abzsl EQUIPMENT - CNC control: Fanuc - Drive for powered tools at: S2, S3, S5 V+H - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Kondisi: bekas, Tahun pembuatan: 2009, en_001 Itsdpfx Abst Rmdzjzel

Kondisi: bekas, Tahun pembuatan: 2010, Drehdurchmesser über Bett 0316 mm Drehlänge 340 mm Steuerung ultimax Hurco Drehdurchmesser über Bettschlitten 240 mm Schwingdurchmesser 402,5 mm Spindeldrehzahlen - stufenlos 0- 6000 U/min- rpm Spindelbohrung 45 mm Vorschübe 0- 30 m/min Betriebsspannung 400 V Itodpfoydqpiox Abzel Anschlußleistung 14 KW Planschlittenweg 185 mm Längsweg 340 mm Raumbedarf ca. 3,76 x 2,92 x 2,15 m Aufnahmedurchmesser VDI 20 mm Hauptantriebsmotor 11,5 kW Maschinengewicht ca. 3,2 t Mit 12- fach Revolver und Stangenlader.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, The LAS 22 is a compact benchtop device with a small working area, ideally suited for small parts. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The LAS 22 universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with either a 20 or 30-watt fiber laser. For permanent marking, the use of the laser is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and part numbers once set up. Additionally, it can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. A hand scanner can also be used. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20-watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (simple preview, contour preview) - Focus finder (easy focusing) - Max. part height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electrically operated door with pinch protection stop Iodpouy H Nqjfx Abzstl - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Kondisi: bekas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] Itodpfx Abjuha Ugezsl SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] SUB OPERATIONS - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 14 [kW] WEIGHT AND DIMENSIONS - Required space: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3500 [kg] MACHINE HOURS - Operating hours: 80,490 [h] ACCESSORIES - Control: Fanuc - Driven tool motorisation at: S2, S3, S5, S6 - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extractor - Coolant reservoir

Kondisi: baik (bekas), Tahun pembuatan: 2017, Mesin dalam kondisi kerja yang baik. Isdpfxjzlalho Abzotl Bagian-bagian yang ditunjuk tidak disertakan. Data teknis dapat dilihat pada gambar.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, berat benda kerja (maks.): 2.500 kg, lebar total: 3.200 mm, panjang total: 15.800 mm, jarak antara pusat: 6.000 mm, diameter benda kerja antara pusat: 850 mm, berat keseluruhan: 19.000 kg, Kami menawarkan mesin gerinda silinder CNC Hol-Monta spol.sro UB 85 / 6000 yang sangat baik, tahun produksi 2014. Model: UB 85 / 6000 CNC Tipe kontrol: Kavalir K 51-2 Nomor seri: H 214 09 005 Diameter ayun: 850 mm Jarak antar senter: 6.000 mm Iodpfsy Hgrgex Abzjtl Perlengkapan gerinda internal Penopang tetap (steadyrests) dan lain-lain.