Pusat Pembubutan dan Penggilingan CNC

DOOSAN Puma 2600L

Kondisi: bekas, Wheel diameter – max. 180 mm Godpfx Asu Uu S Tebhstu Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping on the table Change gears

Kondisi: bekas, Tahun pembuatan: 2001, fi Godpfx Aexp Nfxjbhetu

Kondisi: bekas, Tahun pembuatan: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D ShopTurn Spindle bore: 81 mm Godoww Nazepfx Abhetu Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Driven tool speed: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis Equipment: - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guideways - Tool measurement arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping system

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm Gtjdjhzbipepfx Abhou - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Bagian yang ditunjukkan dengan tangan tidak termasuk. Lemari alat dan alat pemotong tidak disertakan. Hanya penahan alat yang akan disertakan. Gtsdpox Atyasfx Abhsu

Kondisi: sangat baik (bekas), Pressure: 0.5 - 20 t Workpiece diameter - max. 5 - 75 mm Thread length: 2000 mm Gtedovpaa Ropfx Abhou Pitch in mm: 8 mm Roll spindle holder diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speeds: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight approx. 3.1 t Space requirement approx. 1.9 x 1.1 x 1.2 m

Kondisi: bekas, Tahun pembuatan: 2003, en-GB: Technical Details: Bar diameter: 13 mm Turning length: 205 mm Gtodpevivygjfx Abhsu Spindle speed: 12,000 / 12,000 rpm Number of tools: 29 Driven tool stations: yes / 19 Control unit: FANUC 16iT Total power requirement: 9 kVA Machine weight approx.: 1.7 t Space requirements approx.: 2.7 x 1.4 x 1.7 m CNC Swiss-type automatic lathe, Sub-spindle, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, max. speed 12,000 rpm, C axis, Sub-spindle with collet chuck, max. speed 12,000 rpm, C axis, 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders, quills, Fire extinguishing system Kraft und Bauer High-pressure coolant system SF-Systeme Büchele / SHD 150 / 150 bar / 2 x 40 µm / 3 valves, Parts conveyor Operation/programming/electrical/spare parts manuals Machine operating tools Up to 29 turning tools and up to 19 driven tools possible 9.0 kVA Tank capacity 170 L Bar feeder FMB Turbo 2-16/3200/A / for Ø2-Ø20 mm Coolant type: oil Machine dimensions: approx. 2700 x 1400 x 1700 mm; Machine weight: approx. 1700 kg Bar feeder dimensions: approx. 4300 x 600 x 1800 mm; Weight: approx. 700 kg HD system peripheral dimensions: approx. 1500 x 500 x 1000 mm; Weight: approx. 250 kg Peripheral & accessory dimensions: approx. 1200 x 800 x 1000 mm; Weight: approx. 200 kg Peripheral & accessory dimensions: approx. 1200 x 800 x 1000 mm; Weight: approx. 200 kg

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Gtjdpfxjiwkhko Abhju

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G3169-0110, panjang pembubutan: 530 mm, diameter pembubutan: 420 mm, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 220 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 550 mm, berat keseluruhan: 4.700 kg, diameter pembubutan di atas alas geser: 800 mm, de Gtodex I A Hcjpfx Abheu

Kondisi: bekas, Tahun pembuatan: 1998, Translation into English: Swing Diameter: 2000 mm Table Diameter: 1800 mm Turning Height: 1500 mm Control: Siemens Sinumerik 840 C Table Speed Range: 0–280 rpm Feed Range: 0–18,000 mm/min Max. Workpiece Weight: 12,000 kg Total Power Requirement: 177 kVA Feed Drives: - Cross Rail Slide, Vertical and Horizontal: mm/min - Cross Rail Slide, Rapid Traverse: 18,000 mm/min - Cross Rail Adjustment Speed: 425 mm/min Milling Drive: - Milling Drive Power: 30 kW - Number of Gear Stages: 2 stages - Gear Ratio: 3.17 - Speed Range of 1st Gear Stage: 10–224–950 rpm - Speed Range of 2nd Gear Stage: 32–72 rpm Tool System, Cutting Force: - Tool System: 250.2 - Milling Spindle Taper: ISO 69871-A SK 50 - Cutting Force at Turning Tool: 50 kN Equipment/Accessories: - Tool Measuring Probe - Various Turning Tool Holders Gtedpfx Aexap Eysbhou - Various Clamping Jaws - Various Clamping Devices - Various SK 50 Tool Holders - Grinding Spindle - Driven Tools - Tool Changer/Head Changer - Hydraulic Unit - Chip Conveyor - Technical Documentation