CNC Dreh.mit C Achse DOOSAN PUMA GT3100M

DOOSAN PUMA GT3100M

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, kecepatan spindel (maks.): 2.800 rpm, jarak pergerakan sumbu X: 280 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 30.000 W, tinggi total: 1.915 mm, lebar total: 2.035 mm, berat keseluruhan: 5.650 kg, panjang produk (maks.): 3.821 mm, jumlah sumbu: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw hydraulic chuck with a diameter of 305 mm. If you are looking for a high-quality CNC lathe, you should consider the horizontal turning center DOOSAN Puma GT 3100 M, which we are offering for sale. Please contact us for further details. • Siemens S828D control with touchscreen and 15-inch ShopTurn display • 3-axis CNC horizontal lathe with live tooling and tailstock • C-axis main spindle: 360° with 0.001° resolution • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing over bed: 720 mm • Swing over cross slide: 590 mm • Max. turning diameter: 376 mm • Max. turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max. spindle torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N Hsdpfx Aajy E I Hijnofg • 3-jaw hydraulic chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max. speed for live tooling: 5000 rpm • Live tool drive power: approx. 7.7 kW • Live tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite design • 30° slant bed construction • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with work area lighting • Interface for bar feeder • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total connected load: approx. 47 kVA • Unused (like new) Additional Equipment • OPTIONAL: HALTER LoadAssistant Universal Big 70 (Robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Tahun pembuatan: 1976, Kondisi: baik (bekas), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Hedsbh Ubwspfx Aanofg Mandrel Ø: 508 mm

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 195125, diameter pembubutan: 545 mm, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 410 mm, jarak lintasan sumbu Y: 140 mm, jarak gerak sumbu Z: 570 mm, berat keseluruhan: 5.040 kg, The MAZAK Integrex 100-IV is a compact and high-precision CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to its combination of turning and milling capabilities as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in medical technology, mechanical engineering, and precision mechanics. Hedpfxoyir I Re Aanjfg The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control system. This allows for both conversational and ISO programming, offering modern features for efficient and productive manufacturing. Technical Data Overview: Travel ranges are 410 mm in the X axis, 140 mm in the Y axis (±70 mm), and 570 mm in the Z axis. The B axis features a swiveling range of 225°, enabling complex 5-sided machining. The C axis on the main spindle boasts a high positioning accuracy of 0.001°. The maximum turning and swinging diameter is 545 mm each. The main spindle reaches speeds up to 6,000 rpm with a power output of approx. 11 kW, enabling dynamic and precise turning operations. The integrated milling spindle operates at speeds up to 12,000 rpm with approx. 5.5 kW power, making it ideal for milling, drilling, and threading tasks. The machine is equipped with a tool changer (included) for a maximum tool length of 210 mm, as well as a KM tool interface, which ensures high rigidity and fast tool changes. Equipment: Equipment includes: • Chip conveyor • "Tool Eye" tool measuring system With a machine weight of approx. 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility—ideal for cost-effective complete machining in modern production environments. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 35.044 h, kecepatan spindel (maks.): 10.000 rpm, tinggi total: 3.000 mm, lebar total: 2.500 mm, berat keseluruhan: 11.000 kg, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: SIEMENS, model controller: 840D, daya motor spindle: 16.800 W, panjang produk (maks.): 2.500 mm, beban meja: 500 kg, berat alat: 8.000 g, jumlah slot dalam magazin alat: 82, jumlah sumbu: 5, This 5-axis universal machining centre, HERMLE C40U Dynamic, was manufactured in 2011. It features travel paths of 850 mm on the X-axis, 700 mm on the Y-axis, and 500 mm on the Z-axis. The machine offers a maximum spindle speed of 10,000 rpm and has a tool magazine with 38 positions plus an additional 43-tool extension. If you are looking for high-performance machining solutions, you should consider the HERMLE C40U Dynamic machine we have for sale. Please contact us for further details. • Utilisation: 70% Hsdpfx Aoy Al Ufoanefg • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Output at 40%: 1,500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1,500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tools/Magazines: • Number of magazines/turrets: 2 • Magazine capacity: 38 positions • Additional magazine: +43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll cooling system • Renishaw OMP 40 probe • Through-spindle coolant (IKZ) • Laser beam monitoring • Chip conveyor • Taper size SK 40 • Operating voltage: 400 V/3~ • Mains frequency: 50 Hz • Control voltage: 24 V- • Total rated current: 60 A • Total power: 41 kVA Additional equipment • OPTIONAL at extra cost: Tool package available (approx. 530 tools) • OPTIONAL at extra cost: Zero-point clamping system The machine was serviced by HERMLE in 2025. In August 2025, the spindle head was replaced and the geometry was re-checked and adjusted by a HERMLE technician. Technical Specification Taper Size: SK 40

Tahun pembuatan: 2023, Kondisi: baru, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Hjdpfjh Rabnsx Aansfg Construction: steel + aluminum Overall dimensions: 3350/2200/1300 mm Working area: 3100/1520/140 mm XY axis drive with dual-side gantry drive: 4Nm stepper motors with gear units, rack and pinion (accuracy class 8) Z axis drive: stepper motor with ball screw Traverse speed: up to 25 m/min Z axis control system: THC My plasm system Collision protection system safeguarding the torch against damage Linear guides: TBI Automatic material detection system Power supply: 240V Maximum load capacity: 1700 kg Net weight: 1200 kg INCLUDED IN THE SET: - Control console - Water table - Exchangeable grate - Control software in German, English, and Polish - CE declaration of conformity - Technical documentation (DTR) - Warranty It is possible to select a suitable Hypertherm plasma source tailored to your company’s individual requirements.

Tahun pembuatan: 2000, Kondisi: bekas, en-WENZEL LH 108 CNC – Controlled Vertical 3D Measuring Machine x-axis travel: 1000 mm y-axis travel: 1600 mm z-axis travel: 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight: approx. 5,500 kg Space requirement: (dimensions not specified) Model: LH 108 CNC Year of manufacture: 2000, continuously serviced and calibrated by the manufacturer _____ Y-axis as a longitudinally movable measuring gantry: 1,600 mm X-axis as crosswise measuring head carriage: 1,000 mm Z-axis as vertical measuring quill: approx. 800 mm Max. workpiece/table load: approx. 2,250 kg Clearance under measuring gantry: approx. 900/1000 mm Table size (overall): approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table top thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special features / Accessories: • Measuring table, traverse, and quill made of dark natural hard stone; table features 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, providing smooth, virtually wear-free operation, fitted with incremental linear scales with 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW 31.351 installed in the work table (control unit replaced approx. 3 years ago) • WENZEL measuring software type METROSOFT QUARTIS R 12 SP1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments) with measuring probe model PH 10 M plus and probe TP 20 with various accessories • RENISHAW Probe Head Controller unit type PHC 10 C-3 plus, also integrated in the work table • Automatic probe changer possible, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive joystick for manual control of all three axes with continuously adjustable travel speeds • Calibration sphere for mounting on table, work table, various clamping devices, etc. Condition: Very good – generally available for inspection under power in stock, demonstration-ready; disassembled by a CMM specialist at previous owner's site and reassembled here. Delivery: Ex-stock – as seen and inspected Payment: Net – payment upon receipt of invoice. Hodpfx Aaet Hw Nyenofg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 2.800 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 105 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 22.000 W, tinggi total: 2.163 mm, lebar total: 2.005 mm, berat keseluruhan: 7.500 kg, panjang produk (maks.): 4.438 mm, jumlah sumbu: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine is equipped with a 12-station turret, a tailstock with tailstock drive, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN Puma 2600 LYB II, which we offer for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over cross slide: 630 mm • Recommended turning diameter: 315 mm • Maximum turning diameter: 376 mm • Maximum turning length: 1,350 mm • Bar capacity: 102-103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Driven tool speed: 5,000 rpm • Axes: • C-axis rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock Hedpfx Ajytt A Rjanefg • Type: Rotating tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill travel: 100 mm • Motor / Power • Driven tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical power: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, diameter range 40-200 mm • Three powered radial Eppinger chucks/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Tahun pembuatan: 1971, Kondisi: baik (bekas), Uncoiling mandrel – expanding mandrel with support table Strip width: 1,200 mm Strip thickness: 0.3 – 5 mm Coil weight: 10 t Hsdpfxod Ha E Se Aansfg Mandrel diameter: 508 mm

Kondisi: baik (bekas), Tahun pembuatan: 2015, en-GB Hfjdpfxjy Hrpds Aansg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Mesin Bubut CNC DOOSAN Puma 2600SY II dengan kontrol Siemens; Termosensor untuk presisi tertinggi; Sumbu Y; Spindle lawan dengan chuck collet; Lubang spindle 80 mm (spindle utama); Semua sumbu dengan bantalan datar - cocok juga untuk pemesinan berat; Konveyor serbuk, tool setter, penangkap komponen dengan sabuk, pistol cairan pendingin, sistem penyedot; Sistem pendingin tekanan tinggi 70 bar; Berbagai dudukan alat tetap dan penggerak; Hfodpfxey Amfle Aaneg