Penghancur poros tunggal

Doppstadt DW 3060 K Büffel

Kondisi: bekas, Tahun pembuatan: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition Nedpjx Nkhqjfx Abvscp For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, thus featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of delivery: - 1 set armored shafts HW 8/10 with combs and re-breaking bar, suitable for scrap and waste - 1 set used shafts HW 8/10 with combs and re-breaking bar, likewise for scrap and waste - DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked, hydraulically driven Areas of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling materials — Condition: - Well-maintained machine - Fully functional - Sale as inspected on site Additional Information / Service History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness or changes to the information provided. Sale is made exclusively subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 1.743 h, Fungsionalitas: berfungsi sepenuhnya, daya: 257 kW (349,42 hp), de-01 Ncsdpfxjydmgde Abvjp

Kondisi: sangat baik (bekas), daya: 74 kW (100,61 hp), jenis bahan bakar: diesel, warna: putih, pendaftaran pertama: 10/2008, Tahun pembuatan: 2008, jam operasional: 8.275 h, General Information Model year: 2008 Serial number: TW01100392 Technical Information Number of cylinders: 4 Drive: Wheeled Unladen weight: 10,500 kg Features CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact Ernst van Hek for further details. Ncjdpfx Aswybvajbvsp

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, de-en Ncjdpfx Ajwnfwqebvop

Kondisi: baik (bekas), daya: 122 kW (165,87 hp), berat keseluruhan: 27.000 kg, Tahun pembuatan: 2001, jam operasional: 21.200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Njdpoua At Njfx Abvocp Operating hours: 21,200 Gross weight: 27,000 kg

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 4.240 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package AK565: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tyres 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Permissible total weight 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emissions standard Exhaust gas directed upwards Load-dependent metering control including automatic scraper floor reversal Fuel tank 450 litres Feed roller: length 1,690 mm, diameter 510 mm, fitted with removable tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: flail tip “Streusel plus” Centrally arranged wear strips Electric pump for actuating cylinder functions (e.g. raising/lowering support leg and opening/closing rear basket, folding in/out rear conveyor, releasing drive system) when engine is off 24 V electrical control Separate control panel at the rear of the machine Hydraulically folding fine-shredding basket “Multimesh” (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear door Scraper floor with 32 bars Chain drive feed roller and scraper floor Complete radio remote control Drive system preparation Rear conveyor 4 m, 1,800 mm wide "classic" Non-magnetic center section on rear conveyor Reinforcement plates in the feed hopper (material: Hardox) on both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional Equipment: Hydrostatic drive Fuel tank 600 l Flail tip C1 “bear claw” with carbide Rear conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor - "Twin Drive" Duomatic coupling Smooth impact plate Fine-shredding basket Nsdoyhckmepfx Abvjcp Delivery date to be agreed

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Perangkat dibongkar dari lini produksi, beroperasi hingga akhir. Selalu diservis secara rutin, siap untuk digunakan. Ncedjya Uubopfx Abvjp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.330 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7535, berat keseluruhan: 28.500 kg, daya: 405 kW (550,65 hp), Mesin penghancur mobile LINDNER URRACO 4000 DS (self-propelled) Konveyor keluar dengan magnet di atas, sistem penekanan debu, kompresor udara untuk pembersihan mesin Sepasang poros SF12.9 beserta aksesoris Ncodsxyq Ipepfx Abvop Sepasang poros pra-penghancur dengan aksesoris tersedia berdasarkan permintaan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 38.500 kg, Tahun pembuatan: 2017, jam operasional: 13.326 h, Perlengkapan: perangkat ganti cepat, Liebherr R946 NLC ZSA/hidrolik tambahan/AC/Oilquick OQ80 • Produsen: Liebherr • Tipe: R946 NLC • Tahun pembuatan: 2017 • Jam operasional: 13.326 jam • Berat: 38.500 kg • Daya: 220 kW / 300 HP • Mesin: Liebherr D936A7 6 silinder • Standar emisi: Stage IV / Tier 4f • Mode cepat dan lambat Ncedpfew Rccuex Abvop • Boom mono • Sistem pelumasan sentral • Kisi pelindung kabin pembongkaran • Kamera 360° dengan sistem Skyview • Kondisi rantai 85% • AC • Pemanas kursi • AdBlue • Mesin asal Jerman • Siap pakai langsung • Penawaran ini tidak mengikat dan dapat berubah sewaktu-waktu. - Penjualan antar waktu diperbolehkan, - Kesalahan dan/atau salah ketik tidak dikecualikan. - Penjualan tunduk pada S&K kami.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, daya: 261 kW (354,86 hp), Lindner Urraco U75 D pada sumbu roda dengan magnet dan remote control overhaul total Alat: Disk 6 pcs 7/7 desain Hammel (kondisi 85%) Total 9800 jam kerja 2024: transmisi baru, pompa hidrolik baru, motor hidrolik baru dipasang Ncedeytdkfepfx Abvjp sekarang sekitar 600 jam kerja belt keluar diperbaiki, bagian magnet diganti alat 85% servis baru pengecatan baru siap digunakan segera