Mesin cetak injeksi

Dr. Boy XS 100-14

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Clamping force: 25/35 tons Fsdpfeuykh Dox Aagspd Opening stroke: 200 mm Mold height: 150–300 mm Platen distance: 350–500 mm Tie bar spacing: 221 mm Mold mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009,

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), de2hu-it-lt-lv-nb-nl-pl-001 Fpjdpjtyaypjfx Aagod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Heidenhain TNC 620 V2 control Travel X/Y/Z: 760/480/480 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK40 taper Fjdpfx Aaev Rr Hxogjpd Table size: 900x410 mm Chip conveyor Automation / Robot

Kondisi: bekas, Tahun pembuatan: 1989, jam operasional: 74.900 h, gaya penjepit: 850 kN, diameter sekrup: 40 mm, berat keseluruhan: 3.700 kg, Machine No. 145464 Fjdpfor Hrqrjx Aagepd Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Host computer, handling, air blow-off, sorting diverter, core pull 1 hydraulic, mold temperature control 3 circuits. The following accessories, etc. are included with the machine: Complete 50 mm thermoplastic injection unit, sorting diverter, hydraulic infeed conveyor (height adjustable in 3 steps, integrated in the control system), external disk drive (original Arburg), documentation and service reports from Arburg Service, machine setup course CMD materials (folder), electrical diagrams, documents also in digital form, oil filling (must be pumped into a container before transport – pump is available), electronic water battery.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7/61, Manufacturing origin: Switzerland Voltage: 380/50/3 Net weight: approx. 760 kg Customs tariff number: 8459.2930 External dimensions: approx. 1250x1000x1700 mm TECHNICAL DATA: WORKING AREA X and Y travel: 200x200 mm Vertical quill stroke: 250 mm Quill travel: 70 mm Max. clearance between table and spindle nose: 330 mm Clearance between column and spindle center: 260 mm Max. drilling capacity (in steel): 10 mm Max. boring capacity: 50 mm TABLE Usable surface: 400x300 mm Load capacity: up to 100 kg X and Y travel: motorized Fpjdpfx Aod Amgkjagod Number of T-slots: 6 (longitudinal) DRILL HEAD Spindle taper: Morse 0 Spindle speed, infinitely variable: 150-3000 rpm Spindle feed: 0.015 mm/rev Measuring system: direct, optical Measuring elements: graduated scales, increments 1 mm Readout: display Zero point shift: yes Direct reading: 0.001 mm Guaranteed positioning accuracy: 0.002 mm Installed power: 1.2 kW All technical data is subject to change without notice or error. Inventory No. 2160006, machine equipped with: 1 rotary table Ø 220 mm with optical measurement 1 centering microscope with three-point suspension, 40x magnification, illumination 1 centering device with dial gauge, Cap. 3 mm, MK0 1 Morse taper center, MK0 1 probe with spring-loaded tip, MK0 1 center punch, MK0 1 chuck for centering drills, MK0 1 self-tightening drill chuck 0-5 mm, MK0 1 boring head Type 0, capacity 0.5-30 mm, MK0 1 leveling foot with 2 round leveling supports

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 24.210 h, This Dr. Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine was manufactured in 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 Fpjdpfxjtpf N Uo Aaged – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM Like new, unused The PTUN... module is an individual drying unit for plastic material. Fpodpjvhb S Sefx Aagsd The machine consists of the following components: • Hopper • Support frame • Heating chamber • Connecting pipes • Air control valves.

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Fpedpfx Aslz Rvlsagsd Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.178 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 667171, berat keseluruhan: 1.154 kg, kapasitas angkut: 210 kg, jangkauan lengan: 3.096 mm, This is a KUKA KR 210 R3100 ultra Year of manufacture: 2018 We are also pleased to offer you the robot as fully refurbished! The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation Fjdpfsrnrprsx Aagepd - UserTech