Single Column Press - Hydraulic

DUNKES HZ 315

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Dsdpfx Agov Rwu Ueqewd Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Djdjr A Hcbjpfx Agqowd Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 12 kW (16,32 hp), panjang dalam: 1.000 mm, lebar dalam: 1.000 mm, tinggi dalam: 1.000 mm, panjang total: 1.395 mm, lebar total: 1.600 mm, tinggi total: 2.045 mm, jenis aktuasi: listrik, jenis bahan bakar: listrik, Perlengkapan: Penandaan CE, en-Matech Powder Oven with Electric Heating – MATOVENB-101010 ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Immediately Available ⚡ Professional Support! plus VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the exclusive authorized European distributor for Matech products ✅ 2-year warranty Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Immediately available ☘️ Professional curing ✅ Electrically heated powder oven ✅ In-stock unit – available immediately ✅ No production lead time ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Programmable automatic exhaust fan function ✅ Buzzer at the end of curing time ✅ Insulated door with special locking system ✅ Robust sandwich panel construction Dwjdpfeghf R Uex Agqjd ✅ Excellent heat retention due to strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Compatible with mobile workpiece trolley ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electric heating capacity: 12 kW ✔️ Fan capacity: 1,500 m³/h ✔️ Recirculation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10 % ✔️ Digital thermal control ✔️ Steplessly adjustable temperature up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm mineral wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Signal tone after process completion ✔️ Control panel: 1 unit ➖➖➖➖➖ Reserve your stock unit now! This unit is currently available 1x in stock. Ideal for workshops, small production areas, and businesses seeking a reliable, electric solution for professional powder coating at short notice. ➖➖➖➖➖ ✳️ Preserve your liquidity! We offer various financing models. Contact us for leasing, hire-purchase, or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure service and quality advantages! ✨ Enquire now – make your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Lift: 1000 mm 3 broaching stations Dodpobrcmksfx Agqowd With chip conveyor + platform for above-floor installation and safety door

Kondisi: bekas, Tahun pembuatan: 1999, translation_de_hu_001 Dodpfx Agevxwqfeqjwd

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 332046, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 2.200 mm, kecepatan spindel (maks.): 850 rpm, kecepatan spindel (min.): 6 rpm, kecepatan pemakanan sumbu X: 8 m/menit, laju pemakanan gandar Y: 6 m/menit, laju pemakanan sumbu Z: 1 m/menit, lebar total: 10.000 mm, panjang total: 14.000 mm, tinggi total: 4.500 mm, diameter spindel: 160 mm, beban meja: 40.000 kg, panjang meja: 3.000 mm, lebar meja: 3.000 mm, berat benda kerja (maks.): 40.000 kg, berat keseluruhan: 71.000 kg, panjang spindel bor: 1.200 mm, tahun perombakan terakhir: 2002, daya: 60 kW (81,58 hp), Mesin bor pelat dengan meja putar CNC TDV5 untuk pekerjaan pemesinan yang menuntut. Dsdpfxjuplptj Agqswd

Kondisi: bekas, Tahun pembuatan: 2025, jam operasional: 21 h, Fungsionalitas: berfungsi sepenuhnya, High-performance ride-on scrubber-dryers in excellent condition for sale! The machine is in very well-maintained condition and ready for immediate use. Condition: Used, very good Operating hours: 21h Year of manufacture: 2025 SCHORR SCRUBBER-DRYER 24V FLOOR CLEANER SCRUBBER 100AH Dwedpewh Ri Ejfx Agqed Efficient floor cleaning combined with extremely simple operation. Restore shine to your facility! The fully electric ride-on scrubber-dryer from SCHORR greatly simplifies cleaning of large hall spaces, especially due to the machine's excellent maneuverability. With a steering angle of 90°, obstacles such as columns or narrow passages pose no problem. No special training is required to operate the machine. Simply fill, sit, and start cleaning. Equipped with 100Ah batteries, intensive continuous operation for up to approx. 4 hours is possible. The batteries can conveniently be recharged using the supplied charger with a standard 230V socket. SCHORR SCRUBBER-DRYER RR1030FS – DISCOVER THE ADVANTAGES: -- Fully electric scrubber-dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning capacity -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Data Manufacturer (abbreviation): SCHORR Model designation: RR1030FS Drive: Ride-on Vacuum motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tyres: PU (non-slip) Net weight: 250kg Basic dimensions Fresh water tank capacity: 80l Waste water tank capacity: 85l Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical data available upon request. This ride-on scrubber-dryer is designed for user-friendliness to make the cleaning process as simple as possible. The intuitive control panel allows easy operation of all functions, enabling even inexperienced users to work with the machine right away. Thanks to the ergonomic seat and clear visibility of the cleaning area, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use on large surfaces. Naturally, we usually keep all spare parts in stock and can deliver them quickly in case you encounter any issues. Should you require technical support, we possess the necessary expertise and can also carry out repairs in our in-house workshop. SCHORR will be happy to answer any questions you may have regarding our ride-on scrubber-dryer. You can reach our knowledgeable team by phone or email. We look forward to hearing from you and assisting with your inquiries.

Kondisi: bekas, Tahun pembuatan: 1972, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Dsdpfocdtnhex Agqowd Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min Dwjdpjytrxksfx Agqsd T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Z: 1.250 mm, diameter pembubutan: 3.200 mm, tinggi pembubutan: 2.000 mm, diameter pelat muka: 3.200 mm, MESIN BUBUT CNC VERTIKAL DENGAN DUA SILINDER KOLOMNA 1532 T MESIN BUBUT VERTIKAL KOLOMNA (VTL) • Diameter pelat 3.200 mm • Diameter bubut maksimum 3.200 mm • Tinggi benda kerja maksimum 2.000 mm • Dua silinder yang dikendalikan CNC • Langkah silinder 1.250 mm • Sistem CNC FAGOR 8070 • Daya motor 115 kW • Peningkatan mekanis, hidrolik, elektrik, dan elektronik yang baru pada tahun 2007 • Pengumpul serpihan Dwodpfx Aex Nhm Rjgqjd • Penutup lengkap • Sistem pendingin • Lampu kerja • Lemari elektrik berpendingin Selain itu, kami juga memiliki Kolomna VTL 1540 dengan diameter 4.000 mm.