Membungkuk gulungan - Rollbending mesin

Durma HRB - 4 2013

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length Gedpfxjd Auacj Adtoil • Hardened rollers are recommended

Kondisi: baik (bekas), Tahun pembuatan: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control system: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically operated support rolls Godpfx Ajvd Dftodtoil Intelligent software features: - Ellipse program - U bend shapes - Tangent control - Auto section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis Axis diameter: 105 mm Number of rolls: 3 X-axis stroke: 0 – 400 mm Dimensions (approx.): Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en-001 Gjdowl U Rhspfx Adtsil

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS Giedpfx Aod E A I Ijdtol ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Gijdpfx Ajd Ab H Hjdtjl Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Giedpfx Askvnumsdtel Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm Gisdpfxoh Ib T Uo Adtsl D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.

Kondisi: baru, Tahun pembuatan: 2025, de-TFON Präzisionsentgrat- und Finishsystem -Konzipiert für erstklassige Oberflächenbearbeitung und präzises Kantenverrunden bei unterschiedlichsten Materialien und Branchen, kombiniert das TFON-System fortschrittliche Automatisierung mit vielseitigen Konfigurationsmöglichkeiten, um exakt Ihren Produktionsanforderungen zu entsprechen. Materialkompatibilität: Giodpfx Adehq A Txotol Geeignet für Anwendungen mit Aluminium, Edelstahl und Baustahl. Großer Dickenbereich: Bearbeitet Materialien effizient von 0 bis 120 mm Stärke. Finishing-Qualität: Entwickelt, um hochwertige Oberflächenfinishs zu erzielen, die sowohl die Ästhetik als auch die Funktionalität des Produkts verbessern. Industrielle Vielseitigkeit: Ideal für die Medizintechnik, gewerbliche Küchenausstattung, Automobilteile und Metallzubehör. Präzises Kantenverrunden: Ermöglicht ein exaktes Kantenverrunden mit Radius 2, erhöht die Sicherheit und verbessert die Produktoptik. Moderne Automatisierung: Integriertes Siemens-Steuerungssystem sichert höchste Präzision und zuverlässige Prozesse. Unabhängige Bearbeitungsstationen: Ermöglichen flexible, effiziente Mehrstufenbearbeitungen für komplexe Fertigungsabläufe. Mehrere Tischbreiten verfügbar: Lieferbar mit Tischbreiten von 650 mm, 1000 mm oder 1300 mm – für vielfältige Produktionsanforderungen. Individuell anpassbare Förderbandoptionen: Wählen Sie zwischen Vakuum-, halbmagnetischem oder halb-vakuumisiertem Fördersystem für sicheren Werkstücktransport. Oberflächenreinigung: Entfernt effektiv Rost, Oxide und Oberflächenverunreinigungen zur Vorbereitung nachfolgender Prozesse. Verbesserte Arbeitssicherheit: Die Kantenverrundungsstation minimiert das Risiko von Schnittverletzungen durch scharfe Kanten. Hochleistungsfinish: Ausgestattet mit Scotch-Schleiftechnologie für gleichmäßige, glatte Oberflächenqualitäten. Lange Standzeit der Schleifmittel: Das pneumatische Oszillationssystem maximiert die Lebensdauer der Schleifbänder und Scotch-Schleifmittel – reduziert Stillstandszeiten. Konstanter Radiusauswurf: Sechs Lamellenräder gewährleisten gleichbleibende Kantenradien für durchgehend hohe Qualität. Entwickelt für Leistung. Konzipiert für Sicherheit. Gebaut für industrielle Vielseitigkeit. TFON – Perfekte Oberflächen, bei jedem Durchgang.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Consisting of two toothed belt axes EGC-80-1300-BS-10P-KF-0H-ML-GK and four linear guide rails HGR 20C 1705V9-10A00 with HIWIN linear block HGW CCC 170 3W3-10200. Gjdpfx Adog Ixumsteil Two Unimotors 075E3C300BACAA075140 with two EMERSON UNIDRIVE M 701-3200050A.

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel Giodpegwt S Tsfx Adtjl • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH