Las meja gilirannya

Protec KT 50

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Gusdpfx Asbambrjgrsc Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Packaging and shipping within Germany: approx. €80

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- Godpfxshpktve Agrsuc The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Condition: New machine Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Gusdpfxoilg Hde Agroc Standard features: - Fully hydraulic, semi-automatic design: Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Gsdpfxjg U Uv Re Agrsuc Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner Godpfxehua Dqs Agrouc 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: baru, Model designation Gsdpogvquwsfx Agrouc Shark 332-1 CCS

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: HURCO, model controller: WINMAX, tinggi total: 3.240 mm, beban meja: 2.000 kg, berat keseluruhan: 7.950 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 7.000 g, jumlah sumbu: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It is equipped with a robust SK40 spindle reaching speeds of up to 12,000 rpm and offers a large table area of 1500 x 660 mm, capable of supporting workpieces up to 2,000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, this machine is ideally suited for dynamic machining operations. Includes an automatic tool changer with 30/40 positions. Please contact us for further details regarding this machine. • Spindle nose to table: 101–711 mm • Table working area (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 mm • Automatic tool changer (ATC) positions: 30/40 Gedpfx Aex D E Acogrouc • Machine condition: Powered on and operational • Total machine hours: 6,700 Additional equipment: • Chip conveyor • Mist extractor • External coolant tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions for DWG/DXF Dimensions: Machine depth: 5059 mm

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 5.000 kg, Complete set incl. hand and double foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Godpfsl Dq U Uex Agrsuc Speed from 0.01 to approx. 0.9 rpm CE certified

Kondisi: baru, Tahun pembuatan: 2025, - Horizontal capacity: 500 kg Gjdpfxjgg Rb Ts Agrsuc - Vertical capacity: 250 kg - Table size: 560 mm - Door left: 170 mm - Electrically tiltable - Foot pedal - Documentation - 230V

Tahun pembuatan: 2019, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: MISCO1082,