Sistem pemotongan plasma 4.000 mm x 2.000 mm

DURMA PL-C Vorführmaschine

Kondisi: baru, Table length: 3000 mm Table width: 1500 mm Table height: 200 mm Weight: 1500 kg Manufacturer: GERD WOLLF Technical Details: • Length: 3000 mm • Width: 1500 mm • Height: 200 mm • Weight: 1500 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Increased fatigue strength • Increased vibration resistance • Precision fine scaling • Reinforcement through weld seams and ribs on the underside • Optimum working height of 820–865 mm • 8 height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided in one piece after mechanical processing. In addition, they feature precision fine scaling, which is laser-engraved for accuracy. To guarantee optimal stability, our welding tables are reinforced on the underside with welded seams and ribs (see images). Bjdjymf Rtopfx Abvjdh Furthermore, the tables undergo a 3-day gas nitriding process, which significantly enhances corrosion resistance as well as the fatigue and vibration strength of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, maximum 665 mm. As a result, a variable working height of 820 to 865 mm is possible. Further available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images shown do not represent the original size and are for illustrative purposes only. Our welding tables are produced for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding table

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. Bdjdpjfz U S Esfx Abvoh All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baik (bekas), schutzgasschweissgeraet-arc-mig-puls-esab-aristomig-500w Bdsdey Ulzijpfx Abvsh

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Bodpfxowp Nv Hj Abvodh Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Bdodpfshmvawex Abveh

Kondisi: baru, Tahun pembuatan: 2023, panjang total: 6.700 mm, lebar total: 1.500 mm, tinggi total: 2.950 mm, masa garansi: 12 bulan, berat keseluruhan: 2.200 kg, daya: 12 kW (16,32 hp), Tinggi mesin: ~2.950 mm Lebar mesin: ~1.500 mm Bdodpfovr Tbaox Abvsh Lebar mesin dengan pintu terbuka: ~2.950 mm Panjang mesin: ~2.950 mm Diameter meja: 1.200 mm Maks. tinggi benda kerja: 500 mm Kapasitas meja maks.: 500 kg Jumlah wheel sandblasting: 1 x 7,5 kW E-Eco Inverter frekuensi untuk turbin: 1 unit Waktu sandblasting: Dapat disesuaikan PLC: Siemens S7 1200 + TP 4'' Filter: PC2 (1.500 m³/jam) Daya terpasang total: ~12 kW Aplikasi untuk sandblasting pelek truk: YA Aplikasi untuk sandblasting pipa dari 1'' (24mm) hingga 8'' (203mm): YA Jenis mesin ini dapat dirakit sebelum pengiriman, hanya membutuhkan satu hari untuk persiapan kerja. Mesin tersedia di stok. Pengujian mesin di lokasi kami bisa dilakukan dengan pemberitahuan terlebih dahulu.

Tahun pembuatan: 1968, Kondisi: baik (bekas), for aluminium Bjdsgryk Nopfx Abvodh Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Kondisi: baru, Tahun pembuatan: 2024, kecepatan pemakanan sumbu X: 25 m/menit, laju pemakanan gandar Y: 25 m/menit, laju pemakanan sumbu Z: 25 m/menit, panjang total: 7.600 mm, tinggi total: 3.000 mm, lebar total: 2.650 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 4.000 rpm, DYAS 3 BDC CNC Profilbearbeitungszentrum für Träger Arbeitsbereich für Profile: Min. 200 x 80 mm / Max. 1200 x 500 mm Arbeitsbereich für Länge: Min. 2000 mm / Max. 12000 mm (Brutto: 12500 mm) Bohrkopf (Spindel): 3 Spindeldrehzahl: 50-4000 U/min (stufenlos) Spindelleistung: 22 kW Spindeldrehmoment: 280 Nm Bjdpfegbdpkex Abvodh Werkzeugwechsler: 6 je Spindel, insgesamt 18 Gewindeschneidbereich: M10-M30 Bandsäge (optional) Schnittgeschwindigkeit: 20-100 m/min Gehrungswinkel: +60°/-45°

Tahun pembuatan: 2020, Kondisi: baru, The Sapphire is the optimal solution for heavy industry when processing material thicknesses up to 200 mm. It enjoys great popularity among a wide range of manufacturing companies—often in three-shift operations—as well as in all application areas where stability, efficiency, and process reliability are of utmost importance. Thanks to its high-quality configuration, the system serves as a universal tool for the highest demands and a valuable asset in process optimization. Now in use in more than 400 industrial operations worldwide, the Sapphire cutting system proves its worth day after day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning Bjdpsf Ak N Rofx Abvodh - CamConcept Finest Cut V7 - Extraction table 3000 x 6000 mm - PFC 6 extraction system including extraction ducts - Delivery, installation, and commissioning Key Features • High dynamics and precision in automated 2D & 3D cutting of sheet metal, tubes, and profiles • Plate processing up to a material thickness of 200 mm • Comprehensive cutting database for optimal operator convenience • Designed to meet the highest demands under the toughest multi-shift conditions General Technical Data Drive: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Worktable height: 740–760 mm Ambient operating temperature: +5 °C to +45 °C Ambient humidity: max. 90%

Kondisi: bekas, nomor mesin/kendaraan: 050189, for groove width: 13 - 30 mm Bjdpfx Aeb Amlhjbvjdh for groove depth: 22 - 35 mm Cutter speed approx.: 1200 rpm Drive motor: AC 220 V, 1020 W Weight: approx. 6 kg